• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.363-372
• /
• 2007

The residual settlement due to difference between predicted and observed settlement is one of the social problems during reclaiming construction in the soft ground having a deep depth such as Busan and Gwangyang province. Prediction error for the secondary compression settlement makes the construction much harder. To examine characteristics of the secondary compression settlement, the secondary compression index is the most important factor. In this study, various empirical methods for determining the secondary compression index are evaluated. And errors applied to the design case practically are also explained. The pre loading method is the only way to reduce the secondary compression settlement and reduction ratio of the secondary compression should be investigated correctly. Hence, research results on the reduction ratio of the secondary compression are analyzed in this paper. Moreover, decrement of the secondary compression index due to over consolidation ratio is examined closely by laboratory consolidation test using clay in the Gwangyang area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2789-2800
• /
• 1996

Real time fractal coding for successive QCIF 144*176 luminance images has been implemented on a 50MHz IBM 486 personal computer. To satisfy the frame encoding speed and data compression ratio, following algorithms are adopted. In order to minimize encoding time, extension SAS being not searching of domain blocks is used. for reducing the bits per pixel, conventioal 4*4 range block is extended to 8*8 range block. and range block extension decrease quality of decoded image. For improvement quality of decoded image, the paper apply quad-tree partition mothod. In order to divide **8 range block, self-simiarity is compared 8*8 range block with spatial contractive transformed 8*8 domain block. According to self-simiarity, the block is partitioned and owing to block partition, increased encoding time is minimized. According to self-simiarity of 8*8 range block and spatial contractive transformed 8*8 domain block, number of fractal factor is varied. Simultaneously with minimizing the decrement of decoded image's quality, transmittion rate and encoding time is shorted. The results enable us to process the real-time fractal coding. For the claire test image, the average PSNR was 32.4dB, 0.12 bit rates and 33ms coding time per frame.

• Wind and Structures
• /
• v.17 no.6
• /
• pp.609-627
• /
• 2013

The Yingxian wooden tower in China is currently the tallest wooden tower in the world. It was built in 1056 AD and is 65.86 m high. Field measurements of wind speed and wind-induced response of this tower are conducted. The wind characteristics, including the average wind speed, wind direction, turbulence intensity, gust factor, turbulence integral length scale and velocity spectrum are investigated. The power spectral density and the root-mean-square wind-induced acceleration are analyzed. The structural modal parameters of this tower are identified with two different methods, including the Empirical Mode Decomposition (EMD) combined with the Random Decrement Technique (RDT) and Hilbert transform technique, and the stochastic subspace identification (SSI) method. Results show that strong wind is coming predominantly from the West-South of the tower which is in the same direction as the inclination of the structure. The Von Karman spectrum can describe the spectrum of wind speed well. Wind-induced torsional vibration obviously occurs in this tower. The natural frequencies identified by EMD, RDT and Hilbert Transform are close to those identified by SSI method, but there is obvious difference between the identified damping ratios for the first two modes.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5043-5047
• /
• 2013

Background: This is a part of a larger effort to characterize the effects on socio-economic factors (SEFs) on cancer outcome. Surveillance, Epidemiology and End Result (SEER) bone and joint sarcoma (BJS) data were used to identify potential disparities in cause specific survival (CSS). Materials and Methods: This study analyzed SEFs in conjunction with biologic and treatment factors. Absolute BJS specific risks were calculated and the areas under the receiver operating characteristic (ROC) curve were computed for predictors. Actuarial survival analysis was performed with Kaplan-Meier method. Kolmogorov-Smirnov's 2-sample test was used to for comparing two survival curves. Cox proportional hazard model was used for multivariate analysis. Results: There were 13501 patients diagnosed BJS from 1973 to 2009. The mean follow up time (SD) was 75.6 (90.1) months. Staging was the highest predictive factor of outcome (ROC area of 0.68). SEER stage, histology, primary site and sex were highly significant pre-treatment predictors of CSS. Under multivariate analysis, patients living in low income neighborhoods and rural areas had a 2% and 5% disadvantage in cause specific survival respectively. Conclusions: This study has found 2-5% decrement of CSS of BJS due to SEFs. These data may be used to generate testable hypothesis for future clinical trials to eliminate BJS outcome disparities.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.3-8
• /
• 2005

Building parts of Multi-Family Houses are consisted of several building material assembly. Therefore, after selecting building materials with test result of emission intensity and their feature, composed building materials are made equally with actual construction methods, and experimented emission intensity. 7 days after experiment, formaldehyde emission intensity appeared low in an order of Tile Wall, Wood Flooring, Wallpaper, Reum Flooring, Silk Wallpaper, and 20 days after experiment, TVOC emission intensity appeared low in an order of Tile Wall, Reum Flooring, Silk Wallpaper, Wood Flooring, Wallpaper. There was a clear difference in TVOC emission intensity according to kind of building materials. Composed building materials that weight per unit area is big and omission intensity is high, they effect continuously to indoor air because decrement is small.

• Tribology and Lubricants
• /
• v.39 no.2
• /
• pp.61-71
• /
• 2023

This study proposes a procedure for designing a labyrinth seal that meets both leakage flow rate and rotordynamic performance criteria (effective damping, amplification factor, separation margin, logarithmic decrement, and vibration amplitude). The seal is modeled using a one control volume (1CV) bulk flow approach to predict the leakage flow rate and rotordynamic coefficients. The rotating shaft is modeled with the finite element (FE) method and is assumed to be supported by two linearized bearings. Geometry, material and operating conditions of the rotating shaft, and the supporting characteristics of the bearings were fixed. A single labyrinth seal is placed at the center of the rotor, and the linearized dynamic coefficients predicted by the seal numerical model are inserted as linear springs and dampers at the seal position. Seal designs that satisfy both leakage and rotordynamic performance are searched by modifying five seal design parameters using the multi-grid method. The five design parameters include pre-swirl ratio, number of teeth, tooth pitch, tooth height and tooth tip width. In total, 12500 seal models are examined and the optimal seal design is selected. Finally, normalization was performed to select the optimal labyrinth seal designs that satisfy the system performance requirements.

• Journal of Korea Foresty Energy
• /
• v.17 no.1
• /
• pp.36-46
• /
• 1998

The aim of this study was to develop the noise and vibration damping wood-based composites by using viscoelastic polymer materials. Polyvinylchloride(PVC) was plasticized with 20-140 phr bis(2-ethylhexyl) phthalate(DOP) and the dynamic tensile mechanical properties were measured at 110Hz and approximate temperature range -100 to 150$^{\circ}$ using a Rheovibron Instrument. The PVC/DOP blends were shown to be compatible in all proportions, and both T(E”$_{max}$) and T(tan${\delta}_{max}$) shifted to the lower temperature side as the DOP content increased. The vibration damping properties of wood/polymer composites were measured using the Rheovibron instrument in a bending mode. The composite damping factor(tan ${\delta}_{c}$) of wood /PVC-DOP/wood sandwich structure correlated with the loss factor and that of the coated structure correlated with the loss modulus(E”) of the polymer layer. In addition, the sandwich structure was found to be more effective in damping than the coated structure. The logarithmic decrement (${\Delta}$c) curve of a sandwich structure, which was determined by the free-free flexural vibration method was similar in shape to the tan ${\delta}_{c}$ curve.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.756-760
• /
• 2007

The $(1-x)Mg_4Ta_2O_9-xwt%TiO_2\;(x=5\sim20)$ microwave dielectric ceramics were prepared by solid-state reaction method and sintered at $1450^{\circ}C$. According to the X-ray diffraction data, the $Mg_4Ta_2O_9-xwt%TiO_2$ ceramics had main phase of $Mg_4Ta_2O_9$ and $MgTi_2O_5$ peaks were added by increasing of $TiO_2$ addition. Microwave dielectric properties of the $Mg_4Ta_2O_9-xwt%TiO_2$ ceramics were influenced by $MgTi_2O_5$ phase and properties of $TiO_2$. There was a little decrement of the quality factor from 116,800GHz of pure $Mg_4Ta_2O_9$ to 100,100GHz of 15wt% $TiO_2$ added one. But there was excellent improvement in temperature coefficient of the resonant frequency (TCRF) by addition of 15wt% $TiO_2$. The dielectric constant quality factor and TCRF of the $Mg_4Ta_2O_9-xwt%TiO_2$ ceramics sintered at $1450^{\circ}C$ were $13.08\sim16.41,\;45,000\sim165,410GHz,\;-24.82\sim+3.88ppm/^{\circ}C$, respectively, depending on the value of x. Simulated dielectric resonator (DR) with $Mg_4Ta_2O_9-15wt%TiO_2$ ceramics had the operating frequency of 11.97GHz and $S_{2,1}$ of -35.034dB.

• Wind and Structures
• /
• v.25 no.1
• /
• pp.1-24
• /
• 2017

This paper presents a 1:25 multi-freedom aero-elastic model for a high lighting pole at the Zhoushan stadium. To validate the similarity characteristics of the model, a free vibration test was performed before the formal test. Beat phenomenon was found and eliminated by synthesis of vibration in the X and Y directions, and the damping ratio of the model was identified by the free decay method. The dynamic characteristics of the model were examined and compared with the real structure; the similarity results were favorable. From the test results, the major along-wind dynamic response was the first vibration component. The along-wind wind vibration coefficient was calculated by the China code and Eurocode. When the peak factor equaled 3.5, the coefficient calculated by the China code was close to the experimental result while Eurocode had a slight overestimation of the coefficient. The wind vibration coefficient during typhoon flow was analyzed, and a magnification factor was suggested in typhoon-prone areas. By analyzing the power spectrum of the dynamic cross-wind base shear force, it was found that a second-order vortex-excited resonance existed. The cross-wind response in the test was smaller than Eurocode estimation. The aerodynamic damping ratio was calculated by random decrement technique and the results showed that aerodynamic damping ratios were mostly positive at the design wind speed, which means that the wind-induced galloping phenomenon is predicted not to occur at design wind speeds.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.6
• /
• pp.465-471
• /
• 2007

The system efficiency of the proposed Buck-Boost AC-DC converter is increased by soft switching method. The converter includes to merit of power factor correction (PFC) from sinusoidal control of input current. The switching behavior of control switches operates with soft switching by partial resonance, and then the proposed converter has high system efficiency with decrement of switching power loss. The input current waveform in proposed converter is got to be a sinusoidal form of discontinuous quasi-pulse row in proportion to magnitude of AC input voltage under the constant duty cycle switching. Therefore, the input power factor is nearly unity. The output voltage of the converter is regulated by PWM control technique. The discontinuous mode action of current flowing into inductor makes to simplify control method and control components. The proposed PFC Buck-Boost converter is analyzed to compare with the conventional PFC Buck-Boost converter. Some computer simulative results and experimental results confirm to the validity of the analytical results.