• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.5
• /
• pp.68-75
• /
• 1996

The vacuum drying characteristics of water-saturated porous media were studied experimentally. The water-saturated porous media, water-saturated sand layer, was heated by the isothermal bottom wall of the rectangular vessel. The vacuum drying rate and temperature distribution of the sand layer were measured and calculated under a variety of conditions of heated wall temperature, vacuum rate, and thickness of the test material. It was found that the drying rate due to the heat and mass teansfer is greatly influenced by the heated wall temperature, vacuum rate, and thickness of the test material.

• Korean Journal of Microbiology
• /
• v.16 no.3
• /
• pp.103-110
• /
• 1978

Saccharomyces cerevisiae strain M. was cultured in a molasses-containing media with different amounts of phosphorous and nitrogen sources. The effects of constituents of the cell on the functional activity as well as sensitivity of it were investigated, the results obtained being summarised as follows : Both the thermotolerance and dry tolerance of the yeast cell were higher when the more carbohydrate and thehalose were present in the yeast cell. During the drying, the rate of dead cell was noted increasing and the fermentability decreasing, but it was more remarkable at early stage of the decreasing rate of drying, and at the same time increasing rate of dead cell and decrease of fermentability were more remarkable in the yeast cell containing much protein. In this case the speed of drying was slower. The trehalose content in the yeast cell increased during early stage of the drying and this increase was higher when content of trehalose and carbohydrate in the initial yeast cell was relatively high.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.232-239
• /
• 2016

Purpose: The aims of this study were to define the drying characteristics of rapeseed and to determine the optimum thin-layer drying model for rapeseed by considering the effects of drying temperature and relative humidity. Methods: The thin-layer drying experiments were conducted at different combinations of drying air temperature levels of 40, 50, and $60^{\circ}C$ and relative humidity levels of 30, 45, and 60%, on both of which drying rate depends. The drying rate increased with increasing air temperature as well as decreasing relative humidity. The 13 models were fitted to the experimental data. Results: From the results of the regression analysis for empirical constants of the Page model, the values of $R^2$ were the highest (ranging from 0.9924 to 0.9966) and the values of RMSE were the lowest (ranging from 0.0169 to 0.0296). Conclusions: For all drying conditions considered, the Page model was determined to be the most suitable model for describing the thin-layer drying of rapeseed (P-value < 0.01). The moisture diffusion coefficients were calculated using the moisture diffusion equation for a spherical shape, based on Fick's second law.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.558-564
• /
• 1993

The drying characteristics of fluidized bed drying with different drying conditions using naked barley were carried out. This fluidized drying mechanism of naked barley was consisted of consecutive two falling rate parts, first falling rate period and second falling rate period without showing constant rate period. The drying rate constant was increased with decreasing charged amount and relative humidity and increasing air temperature and air velocity. Since the drying rate constant expressed by Arrhenius type equation in the falling rate period showed good linearity, the falling rate period was considered as the controlling step. The activation energy of first falling step was 1,900 cal/gmol, while for second falling step the values showed 2,500 cal/gmol.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.203-211
• /
• 1989

During hot air drying of root vegetables such as radish and sweet potatoes, shrinkage and casehardening occurred, and thereby the quality change appeared. Therfore the hot air drying apparatus in which air temperature, relative humidity and air velocity could be controlled was designed, and the drying and shrinking characteristics of radish and sweet potatoes were studied. Also the external factors that affected these characteristics were investigated. The whole drying process of radish and sweet potatoes could be divided into four different drying rate periods, namely constant rate period, first falling rate period, second falling rate period (a) and (b). The shrinking rate curve consisted of four periods nearly corresponding to drying rate periods. The shrinking rate slowly increased in the constant rate period, rapidly increased in the first falling rate period, and reached the highest value in the early period of the second falling rate period. The surface shrinkage was greatly affected by the thickness of sample, relative humidity and initial moisture content. The shrinking ratio was increased with decreasing thickness and increasing relative humidity and initial moisture content.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.2
• /
• pp.152-157
• /
• 2000

In order to select the optimum drying method for the production of cinnamon extract, water extract and 70% ethanol extract of cinnamon were prepared. And then several drying method of oven drying, vacuum evaporation, spray drying and freeze drying were performed. Content of cinnamic acid, cinnamic aldehyde, eugenol, tannin and free sugar, and antioxidant activity, degree of browning, pH, color value, turbity and solubility were compared. In water extract, contents of cinnamic acid, cinnamic aldehyde, eugenol were 29.45mg/100g, 94.86mg/100g, 120.75mg/100g and decreased to 4.76%∼44.21%, 5.30%∼48.05%, 3.66%∼21.83% by oven dyring, vaccum drying, spray drying respectively, but freeze drying showed a little decrease of those components. In 70% ethanol extract, effectual components decreased to 76.05%∼88.38% and 26.86%∼78.76% by freeze drying and vacuum evaporation respectively. Antioxidant activity decreased by drying and decreasing rate in 70% ethanol extract was lower than water extract. Degree of browning increased as the drying temperature increased. Tannin and free sugars were little affected by drying temperature. Solubility decreased in oven drying and 70% ethanol extract. Overall data suggested that optimum drying methods of cinnamon extract were freeze drying in case of water extract and freeze drying and vaccum drying in case of 70% ethanol extract.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.1
• /
• pp.16-20
• /
• 1988

Square slices of sea tangle was dried in hot air drier that could be controlled air temperature, relative humidity and air velocity. Under various drying conditions, drying and shrinking characteristics were investigated. 1) During drying sea, tangle, the constant rate period was nonexistant and the falling rate could be devided into a 2 periods, namely, a first falling rate period and a second falling rate period. 2) The tip part was proceeded more shrinkage than base part, and under drying condition of air temperature $50^{\circ}C$, relative humidity $30\%$, air velocity 0.4m/s, when the moisture content was reduced to $20\%$, the shrinking ratio of tip part, middle part and base part were 57.5, 54.0 and $42.7\%$, respectively. 3) The drying shrinking and drying rate increased with decreasing relative humidity, but when the moisture content was reduced to $20\%$, the shrinking ratio increased with increasing relative humidity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.5
• /
• pp.774-778
• /
• 1996

The changes in organic acid contents of sea mussel and baby clam during drying at 40, 50 and $60^{\circ}C$ and storage at low $temperature(4^{\circ}C)$ and room $temperature(20^{\circ}C)$ were investigated. Organic acids of 8 varieties were determined and the content of succinic acid occupied over 90% of total organic acids in sea mussel(410.9mg%) and baby clam(96.5mg%). Malic acid was in order in sea mussel(41.2mg%) and lactic acid was in order in baby clam(61.9mg%). The content of organic acids was decreased during drying and rate of decreasing was higher at low drying temperature(40 and $50^{\circ}C)$ than that of high drying $temperature(60^{\circ}C).$ The decreasing rate was higher at room $temperature(20^{\circ}C)$ storage and long storage periods than that of low $temperature(4^{\circ}C)$ storage and short storage periods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.5
• /
• pp.768-773
• /
• 1996

The changes in amino acid contents of sea mussel and baby clam during drying at 40, 50 and 6$0^{\circ}C$ and storage at low temperature(4$^{\circ}C$) and room temperature(2$0^{\circ}C$) were investigated. Amino acids of 17kinds were analyzed in sea mussel and baby clam. Total amino acids content of raw sample were similar to sea mussel and baby clam(6575.30mg%, 6764mg%), decreased during drying and rate of decreasing was higher in baby clam than that of sea mussel. The content of Glx was highest in sea mussel(790.55mg%) and baby clam(990.89mg%), other amino acids differed from samples. The content of amino acids of low drying temperature(40 and 5$0^{\circ}C$) decreased was higher than that of high drying temperature(6$0^{\circ}C$). The rate of decreasing was higher at room temperature(2$0^{\circ}C$) storage and short storage periods than that of low temperature(4$^{\circ}C$) storage and long storage periods.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.533-536
• /
• 2005

Drying shrinkage and strength of the redispersible SBR and PAE powder-modified mortars were experimentally investigated. Results of the study that the drying shrinkage rapidly increased until 7 days of age and it was then saturated to the value of about $1\~2\times10^{4}$ after 14 days. It turned out that the polymer-cement ratio exerted more influence on the drying shrinkage than the content of powder shrinkage-reducing agent did. Flexural (compressive) strength of the mortar increased (decreased) as the polymer-cement ratio increased and it was 7$\~$11 (23$\~$39) MPa at 7 days of age. The average (maximum) increasing (decreasing) rate turned out to be about 10 (30) $\%$. As in the drying shrinkage case, the polymer-cement ratio exerted more influence on both flexural and compressive strengths than the content of powder shrinkage agent did.