• Asian-Australasian Journal of Animal Sciences
• /
• 제19권3호
• /
• pp.341-346
• /
• 2006

Despite many studies, results of superovulation protocols are not consistent in farm animals. In this study, 151 Boer goats were superovulated to examine the factors affecting superovulation and embryo transfer (MOET). An optimal regime for superovulation treatment was identified as a 4-day treatment with decreasing dosages of 6-7 mg Chinese FSH or 240 mg Canadian FSH. The 4-day treatment with decreasing dosages of 6-7 mg Chinese FSH was, therefore, adopted to study effects of the age of does, season and repeated treatments on superovulation and embryo transfer. The best season for superovulation and embryo transfer and pregnancy was autumn, and the best age range was 12-35 months old. Within animals there were no significant differences in the number of ovulations and the rate of transferable embryos between the first and the second superovulation. However, these parameters declined significantly for the third superovulation. No marked effects of the number of ovulations on the proportion of transferable embryos were noted. The parturition rate of the recipients receiving single embryos was not different significantly from those receiving two embryos, and the kidding rate calculated from embryos transferred did not differ significantly between recipients receiving one and two embryos.

• 열처리공학회지
• /
• 제11권1호
• /
• pp.46-53
• /
• 1998

The variation of the mechanical properties, microstructures and the formation of retained austenite with heat treatment conditions in austempered ductile cast iron has been investigated. In the case of austempered ductile cast iron below 25mm diameter, it has been found that a pearlite structure are not obtained under a super cooled condition at range of $0.05^{\circ}C/sec{\sim}10^{\circ}C/sec$, and the matrix is precipitated in graphite, bainite and retained austenite. After austempering treatment the retained austenite is increased with decreasing cooling rate. The elongation increases with decreasing super cooling rate, and the optimum result has been shown to be the elongation of 15.6% at super cooling rate of $0.05^{\circ}C/sec$. The optimum result has been shown to be the tensile strength-elongation balance of $1656kgf/mm^2.%$ and it is more than doubled to as the casting state and continuous cooling condition.

• Journal of Biosystems Engineering
• /
• 제30권2호
• /
• pp.89-94
• /
• 2005

The compression strength of corrugated fiberboard container for packaging the agricultural products rapidly decreases because of various environmental conditions during distribution of unitized products. Among various environmental conditions, the main factors affecting the compression strength of corrugated fiberboard are absorption of moisture, long-term accumulative load, and fatigue caused by shock and vibration. An estimated rate of damage for fruit during distribution is about from 30 to 40 percent owing to the shock and vibration. This study was carried out to characterize the durability of corrugated fiberboard container for packaging the fruit and vegetables under simulated transportation environment. The vibration test system was constructed to simulate the land transportation using truck. After the package with corrugated fiberboard container was vibrated by vibration test system at various experimental conditions, the compression test for the package was performed. The compression strength of corrugated fiberboard container decreased with loading weight and vibrating time. The multiple nonlinear regression equation for predicting the decreasing rate of compression strength of corrugated fiberboard containers were developed using four independent variables such as input acceleration level, input frequency, loading weight and vibrating time. The influence of loading weight on the decreasing rate of corrugated fiberboard container was larger than other variables.

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.423-428
• /
• 2009

용융 폴리우레탄의 비 뉴톤 유동곡선을 Physica cone-plate 레오메타를 사용하여 여러 온도에서 구하였다. 이러한 유동 곡선을 이론적인 비 뉴톤 유동식에 적용하여 유동파라메타를 얻었다. 유동곡선에서 전단 속도를 증가시켰다가 감소시킬 때 hysteresis loop가 나타나며, 틱소트로피 유동 현상을 보인다. 용융 폴리우레탄은 전단 흐름에서는 강한 젤 현상을 보이나, 항복응력 이상에서는 비선형 점탄성 성질을 나타낸다. 전단속도를 감소시킬 때 구조변형이 일어나서 전단응력이 전단 속도 증가시보다 작은 값을 보이게 된다.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1149-1153
• /
• 2002

CH4/CO2 dry reforming was carried out to make syn gas on the Ni/Al2O3 catalysts calcined at different temperatures. The Ni/Al2O3 (850 $^{\circ}C)$ catalyst gave good activity and stability w hereas the Ni/Al2O3 $(450^{\circ}C)$ catalyst showed lower activity and stability. The NiO/Al2O3 catalyst calcined at $850^{\circ}C$ for 16 h (Ni/Al2O3 $(850^{\circ}C))$ formed the spinel structure of nickel aluminate, which was confirmed by TPR. The carbon formation rate on the Ni/Al2O3 $(850^{\circ}C)$ catalyst was very low till 20 h, and then steeply increased with reaction time without decreasing the activity for CH4 reforming. The Ni/Al2O3 $(450^{\circ}C)$ catalyst showed high carbon formation rate at the initial reaction time and then, the rate nearly stopped with continuous decreasing the activity for CH4 reforming. Even though the amount of carbon deposition on the Ni/Al2O3 $(850^{\circ}C)$ catalyst was higher than that on the Ni/Al2O3 $(450^{\circ}C)$ catalyst, the activity for CH4ing was also high, which could be attributed to the different type of the carbon formed on the catalyst surface.

• International Journal of Advanced Culture Technology
• /
• 제8권2호
• /
• pp.270-276
• /
• 2020

In this paper, we analyze the buyer's joint pricing and lot-sizing model in a two-stage supply chain consisting of the supplier, the buyer and the customer. It is assumed that the supplier will permit a certain fixed period for settling the amount the buyer owes to him for the items supplied in order to stimulate the demand for the product. Generally, credit transactions would have a positive effect to the buyer. The availability of credit transactions from the supplier effectively reduces the cost of holding stocks for the buyer and therefore, the buyer has a lot of price options to choose his sales price for a customer in anticipation of increased the customer's demand and, as a result, it will appear to increase the buyer's inventory levels. On the other hand, in the case of decaying products in which their utility decay over time, the decaying rate with time may be expected to reduce inventory levels. In this regard, we need to analyze how much the length of credit period and the decaying rate affect the buyer's pricing and lot-sizing policy. For the analysis, we consider the situation where the customer's demand is represented as a linearly decreasing function of the buyer's sales price. From this perspective, we formulate the buyer's annual net profit and analyze the effect of the length of credit period and decaying rate of the product on the buyer's inventory policy numerically.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권18호
• /
• pp.8589-8594
• /
• 2016

Background: Liver cancer is one of the most common causes of death in the world. In Korea, hepatitis B virus (HBV) is a major risk factor for liver cancer but infection rates have been declining since the implementation of the national vaccination program. In this study, we examined the secular trends in liver cancer mortality to distinguish the effects of age, time period, and birth cohort. Materials and Methods: Data for the annual number of liver cancer deaths in Korean adults (30 years and older) were obtained from the Korean Statistical Information Service for the period from 1984-2013. Joinpoint regression analysis was used to study the shapes of and to detect the changes in mortality trends. Also, an age-period-cohort model was designed to study the effect of each age, period, and birth cohort on liver cancer mortality. Results: For both men and women, the age-standardized mortality rate for liver cancer increased from 1984 to 1993 and decreased thereafter. The highest liver cancer mortality rate has shifted to an older age group in recent years. Within the same birth cohort group, the mortality rate of older age groups has been higher than in the younger age groups. Age-period-cohort analysis showed an association with a high mortality rate in the older age group and in recent years, whereas a decreasing mortality rate were observed in the younger birth cohort. Conclusions: This study confirmed a decreasing trend in liver cancer mortality among Korean men and women after 1993. The trends in mortality rate may be mainly attributed to cohort effects.

• 한국재료학회지
• /
• 제30권2호
• /
• pp.51-56
• /
• 2020

In this study, three kinds of metal chills such as SS400, AC4CH and brass, with different thicknesses of 40 ~ 80 mm, were applied for low pressure casting of Al-Si alloy to control cooling rate. The microstructural characteristics with increasing cooling rate were represented using factors including D₁, D₂, size of primary α phases and shape factor and size of eutectic Si. The tensile properties were investigated and additionally analyzed based on the microstructural characteristics. As the cooling rate increased, D₁, D₂, and sizes of primary α phases and eutectic Si apparently decreased and the shape factor of eutectic Si increased to over 0.8. The ultimate tensile strength (UTS) and yield strength (YS) increased with decreasing D₁, D₂, and size of primary α phases, while elongation increased with decreasing size of eutectic Si and concurrently increasing shape factor of eutectic Si. This indicated that the primary α phases and eutectic Si in Al-Si alloy were refined with increasing cooling rate, resulting in improvement of UTS and YS without sacrificing elongation. After the tensile test, preferential deformation of primary α phases was observed in the Al-Si alloy produced at higher cooling rates of more than 0.1 K/s.

• 대한금속재료학회지
• /
• 제46권6호
• /
• pp.329-337
• /
• 2008

During the continuous casting of boron-bearing steel, the corner cracks on the slab are formed by deformation with low strain rate and rapid cooling at the unbending temperature within the range of 800- $1000^{\circ}C$. Especially, the rapid cooling in the corner of slab during the continuous casting leads to as corner cracking. Therefore, in this study, the hot tensile tests applied to the different cooling rates were taken into account in order to study the effect of cooling rate on the hot ductility of boron-bearing steel. The results revealed that increasing cooling rate deteriorate the hot ductility of boron- bearing steel. Rapid decreasing of the hot ductility is caused by formation of a film-like ferrite and precipitate at the austenite grain boundaries. The morphology of the precipitates in the boron-bearing steel was monitored by PTA (Particle Tracking Autoradiography) and TEM, we observed MnS and BN compound and their morphology was quite different depending on the cooling rates. When the cooling rate is increased, rodshape MnS and BN precipitates can be formed along the austenite grain boundaries. It can cause that weakening the boundary region and decreasing the hot ductility of boron-bearing steel.

• KDI Journal of Economic Policy
• /
• 제39권2호
• /
• pp.75-98
• /
• 2017

This paper aims to estimate the social discount rate (SDR) rather than dig into its theoretical foundation. As SDRs can be derived by investigating both the rate of return on investment and the social time preference rate, we estimate the marginal productivity of both private and public capital and the time preference rate based on the Euler equation. In order to provide a single representative SDR, the weighted averages of the marginal productivity and time preference rate, whose weights are determined by the flow of funds data reflecting the social demand of funds, are presented. Based on the empirical results, we argue that the marginal productivity of private capital stands in the middle of the 3% range while that of public capital varies from 4.5% to 8.6%, with the time preference rate showing a decreasing trend from 3.2% in the early 2000s to 1.2% by around 2030. The single representative SDR or the weighted SDR is estimated to be approximately 3.0~4.5% and expected to continue its downward trend for the foreseeable future.