• 한국농촌건축학회논문집
• /
• 제1권3호
• /
• pp.45-52
• /
• 1999

As a traditional agricultural society changes into an industrial society due to an industrialization policy since the 1960's, there is a tendency of decrease in population and being old in a rural area. Also there has been a remarkable decrease in the rate of large family and families of over three generations as a family type changes from a large family system to a nuclear family one. According to resent studies, the rate of families of the old over 65 in a dong area is 17.0%, While that in eup and myon areas is 35.3% This shows the rural exodus of the young caused by urbanization. The purpose of this study is to compare and analyze consciousness of residence by studying satisfaction of each room of a house by type of living-together in a rural area. On the basis of this, to provide data for planning various residential environment by change of type of living-together in a rural area.

• Carbon letters
• /
• 제2권1호
• /
• pp.15-21
• /
• 2001

In this work, activated carbon fibers (ACFs) were plated with copper metal using electroless plating method and the effects of surface properties and pore structures on chromium adsorption properties were investigated. Surface properties of ACFs have been characterized using pH and acid/base values. BET data with $N_2$ adsorption were used to obtain the structural parameters of ACFs. The electroless copper plating did significantly lead to a decrease in the surface acidity or to an increase in the surface basicity of ACFs. However, all of the samples possessed a well-developed micropore. The adsorption capacity of Cr(III) for the electroless Cu-plated ACFs was higher than that of the as-received, whereas the adsorption capacity of Cr(VI) for the former was lower than that of the latter. The adsorption rate constants ($K_1$, $K_2$, and $K_3$) were also evaluated from chromium adsorption isotherms. It was found that $K_1$ constant for Cr(III) adsorption depended largely on surface basicity. The increase of Cr(III) adsorption and the decrease of Cr(VI) adsorption were attributed to the formation of metal oxides on ACFs, resulting in increasing the surface basicity.

• 약학회지
• /
• 제44권3호
• /
• pp.205-212
• /
• 2000

The effect of BRL 34915, a $K^{+}$ channe$Na^{+}$l opener, on renal function was investigated in anesthetized dog. BRL 34915, when given into the vein, elicited the decrease of urine volume accompanied with the reduction of renal plasma flow (RPF), osmolar clearance ($C_{osm}$) and amounts of sodium excreted into urine ($E_{na}$), whereas reabsorption rate of sodium in renal tubules ($R_{na}$), ratio of $K^{+}$ against $Na^{+}$ in urine ($K^{+}$ /$Na^{+}$) were elevated significantly with a partial fall of mean arterial pressure (MAP). BRL 34915 injected into a renal artery produced the diuretic action along with the increase in RPF $C_{osm}$, $E_{na}$ and amounts of potassium excreted in urine ($E_{k}$), and the decrease in $R_{na}$, reabsorption rate of potassium in renal tubules ($R_{k}$), free water clearance ($C_{H20}$) and $K^{+}/Na^{+}$ ratio in only ipsilateral kidney, however changes of the renal function were not observed in control kidney. BRL 34915 given into carotid artery exhibited the same aspect as changes of renal function induced by intravenous BRL 34915. These results suggest that BRL 34915 has dual effects, renally acting diuretic and centrally acting antidiuretic action.n.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.539-543
• /
• 2009

When the suction pressure of compressor decreases under its limit, the compression ratio is increased causing the malfunctions of compressor. As the method to decrease the compression ratio, hot gas bypass system is usually adopted in heat pump system. In the hot gas bypass system, the discharged gas from the compressor is bypassed into the compressor suction, which causes the increase of suction pressure and the decrease of compression ratio. In this study, the characteristics and performances of the hot gas bypass system in heat pump was investigated experimentally with a variation of the bypass flow rate ratio. With the increase of the bypass rate ratio, the compressor suction pressure was increased, even though the total capacity and COP was decreased. From the analysis of the experimental results, the optimum pressure control algorithm was suggested in this study.

• Journal of Chest Surgery
• /
• 제25권11호
• /
• pp.1192-1202
• /
• 1992

Postoperative cardiac outputs and other hernoaynamic values were serially measured in fifteen patients of cyanotic congenital heart disease, after use of blood cardioplegic solution. Cardiac indices showed no change untill eight postoparative hours, then it began to decline to reach as low as 3.22$\pm$0.7L/min/m2 at 12 hours. After then gradual increse occ-ured to recover upto immediate postoperative value at 20 hours. Sharp decrese of heart rate and increse of systemic vascular resistance during 8~16 hours and steady increase of stroke indices during the whole study periods were observed. These observations suggested that the myocardium recovered gradually after open heart surgery, and that the decrease of cardiac indices during 8~16 hours could be a result of decrease of heart rates and increase of afterload. The changes of cardiac indices correlated with the changes of heart rate, postoperative time and mixed venous oxygen saturation [p<0.05]. No other hemodynamic values found to be in statistically significant correlation with the changes of cardiac indices. Left ventricular dysfunction seemed to occur more frequently during 8~12 hours, but it was not statistically significant. [p=0.73] In conclusion, great care must be taken during 2~3 days after the operation of cyanotic congenital heart disease, not to fall into a low cardiac output state, by maintaing adequate heart rates and reducing afterload especially when the systemic vascular resistance increases.

• Journal of Advanced Marine Engineering and Technology
• /
• 제8권2호
• /
• pp.25-38
• /
• 1984

Since the energy shock in 1973, there have been wide studies for the developments of the alternative energy source, the rationalization of the energy utilization and the energy economy because of the recognition of the limitation of energy source all over the world. This study is experimentally examined in and compared with the engine performance of output, torque and fuel consumption rate, and the exhaust emissions with the change of engine rmp in the cases of using water-gashol blends, gashol and gasoline as a fuel in a conventional 4 cycle 4 cylinder gasoline engine. In the case of using water-gashol blends, it is installed by the exhaust manifold pipe into the intake manifold, and water is injected from nozzle fitted up the air horn of the carburetor. The results are obtained as follows; 1. In the case of an addition with water, the engine output and the torque are little difference with the case of gasoline. 2. The fuel consumption rate is decreased as compared with the case of gasoline. Especially, the decrease in quantity is remarkable at the low rpm. 3. The exhaust emissions are remarkably decreased as compared with the case of gasoline. Especially, decreases of CO and HC in quantity are remarkable at the low rpm, and a decrease of No/sub x/ in quantity is remarkable at the high rpm. 4. There is a moderate condition of operation because the producing factors of NO/sub x/ and CO, HC are contrary to each other.

• The International Journal of Costume Culture
• /
• 제7권1호
• /
• pp.40-47
• /
• 2004

The purpose of this research was to examine the degradation rate of alizarin in accelerated degradation conditions using the GC-MS quantitative analysis. Alizarin dye solution (2.5 x 10/sup -3/ M conc.) were kept in 150℃ oven for total of 7 days and the degradation rate was examined each day. 2.5 × 10/sup -4/M conc. alizarin dye solution was mixed with H₂O₂ according to [H₂O₂]/[dye] ratio 40 and were kept under 365㎚ UV for 2 hours, analyzed after 0, 30, 60, 90, 120min using the GC-MS. Gas chromatogram showed alizarin peak at 9.96 - 10.13 min. retention time range and residual peaks in the wide range from 9.6 to 11.1 min. Oven degradation exhibited an initial decrease in the amount of alizarin, which was followed by increasing amount in 4/sup th/ day. The decrease in the alizarin was significantly shown by the 7/sup th/ day. Same pattern was also observed in the H₂O₂/UV/O₂ degradation samples and was verified ed by the UV-VIS spectra. The differences in the amount of alizarin between 1/sup st/ day and 4/sup th/ day samples, 4/sup th/ day and 7/sup th/ day samples, and Control and 7/sup th/ day samples of the oven degradation were significant at alpha .20.

• 한국의류산업학회지
• /
• 제2권5호
• /
• pp.405-410
• /
• 2000

The effects of individual sweating rates on thermophysiological responses during the decrease phase of clothing surface temperature (Tcs) with cotton (C) and polyester (P) clothed subjects were examined. Seven women subjects were exposed in a climatic chamber at ambient temperature of $27.2^{\circ}C$, relative humidity of 50%, and their lower-legs were immersed in a water bath at a temperature of $35-41^{\circ}C$ for 70 min. During water immersion, Tcs in C-clothed subject rose immediately after the onset of sweating and then Tcs fell gradually. In C-clothed subjects, Tcs decreased directly (p<0.05) in proportion to total sweating rate (TSR), however no significant correlation was observed in P-clothed subjects. The relationship between TSR and changes in mean skin temperature, and skin blood flow showed negative correlation when wearing C-clothing (p<0.05), however, no significant correlation when wearing P-clothing. Individual TSR was correlated with threshold rectal temperature for sweating onset (p<0.05) with C- and P-clothed subjects. The results showed that individual TSR had significant effects on not only Tcs but also on thermoregulatory responses during the Tcs decrease phase.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1188-1195
• /
• 2005

The effects on the dyeing properties and antibacterial activity of fabrics dyed with camomile extract were analyzed. As the results obtained, the surface color of all the dyed fabric was tinged with the yellow of the bright color tone. In the test results of durability, the durability to sunlight of the dyed fabric of both cotton and silk showed from 2nd grade to 3rd grade. The durability to laundry of the dyed fabric of both cotton and silk showed relatively higher grade of 4th-5th. The durability to synthetic sweat of all the fabrics except fer the dyed fabric mordanted with $CuSO_4{\cdot}5H_2O$ showed the relatively good result of 3rd- 5th grade. The durability to friction and dry cleaning of all the dyed fabrics showed the excellent result of 4th-5th grade. In the test results of antibiosis, the dyed fabric of cotton showed the decrease rate of $50\%$ to Staphylococcus aureus and the decrease rate of $70\%$ to Klebsiella pneumoniae. The dyed fabric of silk showed the significant effect with Microscopic growth to the mold bacillus Aspergillus niger.

• 한국수소및신에너지학회논문집
• /
• 제12권3호
• /
• pp.231-238
• /
• 2001

Electrocatalytic activity of palladium for hydrogen oxidation and reduction was studied using AC impedance method. The system under study was arranged in electrolytic mode consisting of Pd electrode under study, Pt counter electrode and Nafion electrolyte between them. Two types of Pd electrodes were used - carbon-supported Pd (Pd/C) and Pd foil electrode. Pd/C anode contacting pure hydrogen showed a steady decrease of charge transfer resistance with the increase of anodic overpotential, which is an opposite trend to that found with Pd foil anode. But Pd foil cathode also exhibited a decrease of the resistance with the increase of cathodic overpotential. The relationship between imposition of overpotential and subsequent change of the charge transfer resistance is determined by the ratio of the rate of faradaic process to the rate of mass transportation; if mass transfer limitation holds, increase of overpotential accompanies the increase of charge transfer resistance. Regardless of the physical type of Pd electrode, the anode contacting hydrogen/oxygen gas mixture did not reveal any independent arc originated from local anodic oxygen reduction.