• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.8
• /
• pp.957-968
• /
• 1999

Performance tests of an airfoil fan and measurement of flow fields at the impeller exit are carried out to investigate the effects of the tip clearance between the rotor and inlet casing on the impeller performance. The impeller is twelve bladed of NACA 65-810 airfoils and tested with 3 different size of gap; 1, 2, 4mm. The relative decrease of pressure rising performance of the fan is 15 percent for the design flow rate when the gap size is 1 percent of the impeller diameter. The reduction of performance becomes large as the flow rate increases. The leakage flow through the clearance affects the through flow of the impeller, which results in decrease of the slip factor as well as the impeller efficiency. The data base obtained in the present study can be used for the design and flow analysis of the airfoil fans.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.3
• /
• pp.204-208
• /
• 1993

A fully automatic image analysis method was applied to obtain detailed data on morphological parameters of a glucoamylase fermentation broth with Aspergillus niger No. PFST-38. a mutant strain for glucoamylase hyperproducer. In the initial stage of fermentation. there was an increase in hyphal length. whereas at the end of the fermentation a decrease in hyphal length and increase in hyphal thickness were observed. The percentage of clumps declined with dilution and the influence of shear stress upon hyphal length was negligible. It was found that the slower the decrease in the main hyphal length and the number of tips with the fermentation time. the higher the glucoamylase production rate was recorded. The production rate of glucoamylase was closely related to the increase in the hyphal thickness.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.117-124
• /
• 2006

Experiments on film cooling were performed with a small scale rocket engine homing liquid oxygen (LOx) and Jet A-1(jet engine fuel). Film coolants(Jet A-1 and water) were injected through the film cooling injector. Film cooled length and the outside wall temperature of the combustor were determined for chamber pressure, and the different geometries(injection angle) with the flow rates of film coolant. The loss of characteristic velocity due to film cooling was determined for the case of film cooling with water and Jet A-1. As the coolant flow increases, the outside wall temperatures decrease but the decrease in the outside wall temperatures reduced over the 8 percent film coolant flow rate. The efficiency of characteristic velocity was decreased with the Increase of the film coolant flow rate.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.623-628
• /
• 2000

This study were conducted to evaluate the mass balance of phosphorus and nitrogen with cropping in experimental pot where the mass of input concentration, and fertilization were variable. Four treatments include CSWNF, TWCF, SWNF. And these cases were compared to the control case of tap water irrigation with conventional fertilization (CONTROL). Fertilization were following conventional fertilization , N : P : K = 11kg : 7kg : 8kg. Input water loading was CSWNF (N:48.7g ,P:3.6g), TWCF(7.8g, 0.6g), SWHF(38.8g ,2.9g), TWNF(38.8g, 2.9g ) and CONTROL(0g ,0g) The result is nitrogen decrease rate; TWCF(19.2%), SWHF(14.9%), CSWNF(9.2%) and SWCF(5.6%). phosphorous decrease rate ; TWCF (10%), SWHF(3.7%), SWCF(0.9%) and CSWNF(0.3%).

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.339-342
• /
• 2004

In this paper, we investigated methods to reduce SAR(Specific Absorption Rate) value with EMI(Electromagnetic Interference) paint distribution on front case of mobile handset. Simulations for several different EMI patterns were carried out. For the purpose of modeling, we used 3 dimensional CAD(Computer Aided Design) program, `Pro-engineering'. SAR simulation was done with SEMCAD, simulation platform for electromagnetic compatibility antenna design and dosimetry. In order to distinguish the individual pieces and to enable an assignment of the different material properties, each subfile was imported separately. In simulation, folding angle was set to $142^{\circ}.$ If we vary folding angle, different SAR value will be obtained. Among the tested EMI paint patterns, the hairpin pattern showed the best performance, i.e. the decrease efficiency of $16.5\%$ and horizontal-direction zigzag pattern showed the decrease efficiency of $12.2\%$ when we set the completely removed pattern as reference.

• Management & Information Systems Review
• /
• v.18
• /
• pp.1-19
• /
• 2006

Ageing induces huge dramatic change of society and economy rather than simple change of population structure. Ageing causes the decrease of working age population and production capable population, thus this brings growth slowness and long-term stagnation. In addition, progress in ageing decreases saving rate, consequently low saving rate brings about the decrease of country-wide investment resources. This ageing problem which is progressive rapidly needs core competence and implementation of human resource professionals to overcome this kind of environment change. First of all, it needs turnover in thinking way toward talents. Secondly, we need innovation one team to pursue innovation and creativity. Thirdly, it should be considered in a new way with the number of workers and efficiency of personnel expenses. Fourthly, employees should make effort for self-advancement. Under the environment with newly change human resource personnels' function and role should be emphasized to maintain sustainable growth and overcome the change of management environment. Therefore, human resources should be emphasized to become competitive personnel and organization with leading the change master and creating the value of the organization.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2334-2339
• /
• 2008

This paper proposes an improved mathematical model for predicting the frosting behavior on a two-dimensional fin considering the heat conduction of heat exchanger fins under frosting conditions. The model consists of laminar flow equation in airflow, diffusion equation of water vapor for frost layer, and heat conduction equation in fin, and these are coupled together. In this model, the change in three-dimensional airside airflow caused by frost growth is accounted for. The fin surface temperature increased toward the fin tip due to the fin heat conduction. On the contrary, the temperature gradient in the airflow direction(x-dir.) is small throughout the entire fin. The frost thickness in the direction perpendicular to airflow, i.e. z-dir., decreases exponentially toward the fin tip due to non-uniform temperature distribution. The rate of decrease of heat transfer in the airflow direction is high compared to that in the z-direction due to more decrease in the sensible and latent heat rate in x-direction.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.9
• /
• pp.448-453
• /
• 2003

In this paper the controlled closing algorithm of the circuit breaker for isolated capacitor banks is proposed. The characteristics of circuit breakers such as RDDS(rate of decrease of dielectric strength) and a mechanical operating tolerance should be also taken into account to locate contact touch instants around voltage zero. The analysis results on the voltages across circuit breaker terminals upon closing operation play an important roles to describe the suggested method. The simulations carried out in order to verify the performance of this method show that the closing instants obtained from the proposed method provide a good suppression effect on the closing transients for both single and back-to-back capacitor banks.

• Macromolecular Research
• /
• v.10 no.6
• /
• pp.369-372
• /
• 2002

The use of ZnO and stearic acid is very well known in sulfenamide accelerated sulfur vulcanization of diene elastomers. Zn-ion coated nano filler has been developed and tested, in styrene-butadiene rubber (SBR) as sulfur vulcanizing activator cum reinforcing filler. In this study Zinc oxide has been replaced by the Zn-ion coated nano silica filler with an aim to study the dual role of this nanofiller in SBR. The presence of Zn-ion on the nano silica filler surface activates the sulfur vulcanization by involving Zn++ in to the sulfurating complex formed with thiazole from sulfenamide. The increase of Zn-ion, on the nanofiller, decrease the scorch safety of the elastomer compound but increase the tensile strength, state of cure and tear strength and attain maximum at its 10% level. The presence of stearic acid increases the rate of vulcanization. Replacement of stearic acid with mono-stearate, however, increases the vulcanization rate but decrease the ultimate state of cure. A mechanistic scheme involving dual function of this nanofiller has been suggested.

• Korean Journal of Microbiology
• /
• v.29 no.4
• /
• pp.263-266
• /
• 1991

The growth of T. novellus in auto trophic and geterotrophic media was studied to determine the time required for cells to enter stationary phase and relative percentage of ribosomal proteins. When T. novellus was grown autotrophically, growth proceeded at a slow rate characteristic of autotrophs and did not enter log phase until the end of the first day. Logarithmic growth proceeded for 3-4 days at which time the cells entered the stationary phase. In particular, logarithmic growth was accompanied by decreasing pH of culture media and in the stationary phase the pH levelled off at 6.0, a decrease of 1.6 pH value compared to original pH of media. The pH decrease was greatest during log phase when cells oxidized thiosulfate to $H_{2}$$SO_{4}$. The doubling time was about 26h. In heterotrophic media growth proceeded at a much faster rate and cells entered stationary phase 20-22h after inoculation. The doubling time was 3h. The protein content of the ribosomes in T. novellus grown heterotrophically was 4.2% greater than those from the organism grown autotrophically.