• 한국환경과학회지
• /
• 제10권5호
• /
• pp.315-321
• /
• 2001

This study was conducted to estimate the decomposition capacity for organic matter by microbe of tidal flat sediments (Hajae, Dongjin and Mankyung). The decomposition rate constants (K') have been determined by Thomas slope method and compared with the values of each tidal flats. The decomposition rates of organic matter by microbe were initially very slow, but at the end of 12 hours, very sharply increased. The values of decomposition rate constant for Dongjin, Mankyung and Hajae tidal flat sediment were 1.364$day^{-1}$/, 1.080d$day^{-1}$ and 0.735$day^{-1}$, respectively. The decomposition rate constant of Dongjin tidal flat sediment which affected by livestock wastewater was higher than others. The decomposition quantity (mg/g/day) of organic matter by microbe of tidal flat sediments was 0.4mg/g/day for Dongjin, 0.36mg/g/day for Mankyung and 0.36mg/g/day for Hajae. The average of decomposition quantity was 0.37mg/g/day. To calculate purification capacity (kg/ha) of organic matter by microbe, we applied to two assumption ; 1) biological action by microbe is occur within 0.1cm under surface 2) specific gravity of sediment are 2.5g/$\textrm{cm}^2$. The purification capacity of organic matter by microbe of tidal flat sediment was calculated to 9.25kg/ha. The relationships between decomposition rate constant (K') and ignition loss (I. L), chemical oxygen demand by sediment (CO $D_{sed}$), total carbon(TC), silt and clay as index of organic matter were a high positive($R^2$=0.97~1.00).

• 대한기계학회논문집A
• /
• 제37권10호
• /
• pp.1305-1313
• /
• 2013

본 논문에서는 경계표현 모델에 특징형상기반 단순화를 적용하는 방법을 제안한다. 특징형상기반 단순화를 위해, 경계표현 모델로부터 볼륨분해 트리가 생성된다. 볼륨분해 트리는 가산적 볼륨, 감산적 볼륨 및 필렛/라운드/모따기 볼륨들의 정규화된 불리언 연산으로 표현되며, 필렛/라운드/모따기 분해, 랩어라운드 분해, 볼륨분할 분해 및 셀 기반 분해로 구성된 단계적 볼륨분해를 이용해 생성된다. 볼륨분해 트리는 중위연산 형태로 변환되고, 볼륨들의 순서를 변경하여 CAD 모델을 단순화시킨다. 제안한 방법의 검증을 위해, 프로토타입 시스템을 구현했고, 테스트 케이스에 대한 CAD 모델 단순화 실험을 수행하였다. 실험을 통해 제안한 방법이 경계표현 기반 CAD 모델의 단순화에 유용함을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.87-94
• /
• 2001

In multibody dynamics, differential and algebraic equations which can satisfy both equation of motion and kinematic constraint equation should be solved. To solve this equation, coordinate partitioning method and constraint stabilization method are commonly used. The coordinate partitioning method divides the coordinate into independent and dependent coordinates. The most typical coordinate partitioning method arc LU decomposition, QR decomposition, projection method and SVD(sigular value decomposition).The objective of this research is to find a efficient coordinate partitioning method in flexible multibody systems and a hybrid decomposition algorithm which employs both LU and projection methods is proposed. The accuracy of the solution algorithm is checked with a slider-crank mechanism.

• 디지털산업정보학회논문지
• /
• 제9권3호
• /
• pp.13-20
• /
• 2013

In this paper, we propose a multi-scale crack detection method. This method uses decomposition, composition, and shape properties. It is based on morphology algorithm, crack features. We use a morphology operator which extracts patterns of crack. It segments cracks and background using opening and closing operations. Morphology based segmentation is better than existing integration methods using subtraction in detecting a crack it has small width. However, morphology methods using only one structure element could detect only fixed width crack. Thus, we use decomposition and composition methods. We use a decimation method for decomposition. After decomposition and morphology operation, we get edge images given by binary values. Our method calculates values of properties such as the number of pixels and the maximum length of the segmented region. We decide whether the segmented region belongs to cracks according to those data. Experimental results show that our proposed multi-scale crack detection method has better results than those of existing detection methods.

• 전자공학회논문지B
• /
• 제32B권10호
• /
• pp.1326-1337
• /
• 1995

In this paper, we transformed the bilinear filter into an equivalent linear multichannel filter and derived QR decomposition based recursive least squares algorithms for bilinear lattice filters. We also defined order update relation of the forward and the backward input vectors by using the channel decomposition. The forward and the backward data matrices were defined by using the forward and the backward input vectors and orthogonalized with the QR decomposition. we can obtain the lattice equations of the bilinear filters by using the channel decomposition. we can be derived the lattice equations of the bilinear filters using this decomposition process which are the same as the lattice equations derived by Baik, we can use the coefficient transformation algorithm proposed by Baik. We derived the equation error and the output error algorithm of the QRD based RLS bilinear lattice algorithm. Also, we evaluated the performance of the proposed algorithms through the system identification of the bilinear system.

• The Korean Journal of Ecology
• /
• 제8권1호
• /
• pp.31-37
• /
• 1985

The decomposition rate of litter and the number of soil microorganisms were measured on various slope directions in deciduous oak forest in Mt. Yongam. And the chemical constitutents of litter and soil were analyzed. The decomposition rate by slope directions followed the order east facing slope>south-east facing slope>north-west facing slope>north-east facing slope>north facing slope>south facing slope>south-west facing slope>west facing slope. Of the chemical constituents analyzed, original concentrations of Ca and carbohydrate were closely correlated with the decomposition rate. There was a close relation between the number of fungi and decomposition rate by slope directions. However, a little relationship existed between the number of bacteria and decomposition rate by slope directions. The number of fungi and concentrations of Ca and carbohydrate correlated to each other. And the number of bacteria is related to concentrations of phosphorus.

• 한국대기환경학회지
• /
• 제17권1호
• /
• pp.97-104
• /
• 2001

Decomposition of trichloroethlyene(TCE) in electron beam irradiation was examined on order to obtain information on the treatment of VOC in air. Air containing vaporized TCE has been studied in a flow reactor with different reaction environments, at various initial TCE concentration and in the presence and absence of water vapor. Maximum decomposition was observed in oxygen reaction environment and the degree of decomposition was about 99% at 20kGy for 2,000ppm initial TCE. The concentration of TCE exponentially decreased with dose in air and pure oxygen. The effect of water vapor on TCE decomposition efficiency was examined. The decomposition rate of TCE in the presence of water vapor (5,600 ppm) was approximately 10% higher than that in the absence of water vapor. Dichloroacetic acid, dichloroacethyl chloride and dichloroethyl ester acid were identified as primary products of this reaction adn were decomposed and oxidized to yield CO and $CO_2$. Perchloroethylene, hexachloroethane, chloroform and carbon tetrachloride were also observed as highly chlorinat-ed by products.

• 대한기계학회논문집A
• /
• 제21권8호
• /
• pp.1311-1321
• /
• 1997

In multibody dynamics, differential and algebraic equations which can satisfy both equation of motion and kinematic constraint equation should be solved. To solve these equations, coordinate partitioning method and constraint stabilization method are commonly used. In the coordinate partitioning method, the coordinates are divided into independent and dependent and coordinates. The most typical coordinate partitioning method are LU decomposition, QR decomposition, and SVD (singular value decomposition). The objective of this research is to find an efficient coordinate partitioning method in the dynamic analysis of flexible multibody systems. Comparing two coordinate partitioning methods, i.e. LU and QR decomposition in the flexible multibody systems, a new hybrid coordinate partitioning method is suggested for the flexible multibody analysis.

• 전자공학회논문지B
• /
• 제31B권5호
• /
• pp.50-57
• /
• 1994

In the non-destructive evaluation techniques using ultrasonic signal, backscattering noise from grain interface decreases the SNR of received signal. In this paper, SSP(split-spectrum processing) based on the constant FBR decomposition method has been applied to enhance the SNR. This algorithm helps to find optimal parameters of filter bank through a simple theory and has an advantage that reduce the signal processing time compared with the conventional constant bandwidth decomposition method. In this experiment, the 304 stainless steel sample is heat-treated and received ultrasonic signal is processed by SSP using the constand bandwidth decomposition method and the constand FBR decomposition method enhanced the SNR by 1.4 dB and reduced the required number of filters by 4 compared with the constant bandwidth decomposition method.

• 펄프종이기술
• /
• 제38권3호
• /
• pp.79-84
• /
• 2006

Hydrogen peroxide has been a bleaching chemical for varied pulp, especially mechanical and deinking pulp. It is catalytically decomposed by some transition metals in pulp slurry. In this paper, some metals which can be contained in pulp such as manganese, copper, iron, magnesium and calcium were used to investigate their effect on the decomposition of hydrogen peroxide. From the result, hydrogen peroxide was more decomposed in the order of Mn, Cu, $Fe^{3+}\;and\;Fe^{2+}$, while Mg and Ca had little effect on the decomposition of hydrogen peroxide. The effect of Mg/Mn ratio on the decomposition of hydrogen peroxide was also investigated. At the specific ratio of them(Mg/Mn=10), hindering effect of peroxide decomposition by Mg was decreased.