• Journal of Mushroom
• /
• v.20 no.2
• /
• pp.86-91
• /
• 2022

Pleurotus eryngii, a white rot fungus, produces two extracellular lignin-degrading enzymes, laccase and manganese peroxidase (MnP). Owing to these enzymes, P. eryngii efficiently degrades synthetic chemicals such as azo, phthalocyanine, and triphenyl methane dyes. In this study, we investigated the degradation processes of four aromatic dyes, congo red (CR), methylene blue (MB), crystal violet (CV), and malachite green (MG), by P. eryngii under solid and liquid culture conditions. CR and MG were the most quickly degraded under solid and liquid culture conditions, respectively. However, compared to CR, CV, and MG, MB was not degraded well under both culture conditions. The activities of ligninolytic enzymes (laccase and MnP) were also investigated. Laccase was identified to be the major enzyme for dye degradation. A positive relationship between decolorization and enzyme activity was observed for CR, MB, and CV degradation. In contrast, decolorization of MG ensued after high enzyme activity. These results indicate that the degradation process differs between MG and the other aromatic dyes. Therefore, P. eryngii could be a potential tool for the bioremediation of synthetic aromatic dye effluent.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.56-62
• /
• 2016

A heterogeneous $Bi_2S_3/TiO_2$ composite catalyst was synthesized via a green ultrasonic-assisted method and characterized by XRD, SEM, EDX, TEM analysis. The results clearly show that the $TiO_2$ particles were homogenously coated with $Bi_2S_3$ particles, indicating that $Bi_2S_3$ particle agglomeration was effectively inhibited after the introduction of anatase $TiO_2$. The Texbrite BA-L (TBA) degradation rate constant for $Bi_2S_3/TiO_2$ composites reached $8.27{\times}10^{-3}min^{-1}$ under visible light, much higher than the corresponding value of $1.04{\times}10^{-3}min^{-1}$ for $TiO_2$. The quantities of generated hydroxyl radicals can be analyzed by DPCI degradation, which shows that under visible light irradiation, more electron-hole pairs can be generated. Finally, the possible mechanism for the generation of reactive oxygen species under visible-light irradiation was proposed as well. Our result shows the significant potential of $Bi_2S_3$-semiconductor-based $TiO_2$ hybrid materials as catalysts under visible light for the degradation of industry dye effluent substances.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.1
• /
• pp.43-49
• /
• 2011

As a rare sugar alcohol, L-arabitol can be used in food and can prevent extra fat deposits in the intestinal tract. Commercially, L-arabitol is prepared from pure L-arabinose by hydrogenation, which needs a high temperature and high pressure, leading to a high production cost for Larabitol. Therefore, this study describes a novel L-arabitol production method based on biological purification from the xylitol mother liquor, a cheap and readily available raw material that contains a high concentration of Larabitol. First, a novel Bacillus megaterium strain was screened that can utilize xylitol, sorbitol, and mannitol, yet not L-arabitol. The isolated strain was inoculated into a medium containing the xylitol mother liquor under formulated culture conditions, where a high L-arabitol yield (95%) and high purity (80%) were obtained when the medium was supplemented with 50 g/l of xylitol mother liquor. Upon further purification of the fermentation broth by ion exchange and decolorization, L-arabitol was crystallized with a purity of 98.5%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2297-2304
• /
• 2002

Two-dimensional and three-dimensional finite element methods have been used to analyze the deformation behavior of a shadow mask due to thermal and tension load. The shadow mask inside the Braun tube of a TV set has numerous slits through which the electron beams are guided to land on the designed phosphor of red, green or blue. Its thermal deformation therefore causes landing shift of the electron beam and results in decolorization of a screen. For the realistic finite element analysis, the effective thermal conductivity and the effective elastic modulus arc calculated, and then the shadow mask is modeled as shell without slits. Next a transient thermal analysis of the shadow mask is performed, wherein thermal radiation is a major heat transfer mechanism. Analysis of the resulting thermal deformation is followed, from which the landing shift of the electron beam is obtained. The present finite element scheme may be efficiently used to reduce thermal deformation of a shadow mask and in developing prototypes of a large screen flat TV.

• Journal of Korean Society on Water Environment
• /
• v.26 no.6
• /
• pp.963-968
• /
• 2010

This study has carried out to evaluate the performance of direct and indirect oxidation electrode for the purpose of decolorization of Rhodamine B (RhB) in water. Four kinds of electrodes were used for comparison: Pt and JP202 (indirect oxidation electrode), Pb and boron doping diamond (BDD, direct oxidation electrode). The effect of applied current (0.5 ~ 2.5 A), electrolyte type (NaCl, KCl, HCl, $Na_2SO_4$ and $H_2SO_4$) and electrolyte concentration (0.5 ~ 2.5 g/L), solution pH (3 ~ 11) and initial RhB concentration (25 ~ 125 mg/L) were evaluated. Experimental results showed that RhB removal efficiency were increased with increase of current, NaCl dosage and decrease of the pH. However, the effect of operating parameter on the RhB removal were different with the electrode type. JP202 electrode was the best electrode from the point of view of performance and energy consumption. The order of removed RhB concentration per energy lie in: JP202>Pt>Pb>BDD.

• Korean Journal of Microbiology
• /
• v.9 no.4
• /
• pp.163-168
• /
• 1971

Neutral protease which was obtained from a genus of Aspergilli as the crystal form were investigated for their purification and properties. The results of biochemical and enzymatic studies for their purification and properties in this enzyme were as follows. 1) On the wheat media containing 70%-water and $CaCo_{3}$, Aspergilus oryzae S.H.W. 131 is satisfactorily grown under the basic optimum conditions temperature $27^{\circ}C$- $30^{\circ}C$at relative humidity 100% for three days. 2) The enzyme solution extracted with water is successively purified through the passing on column of Asmti-177N for decolorization of it. And ion exchanger such as DEAAE Sphadex A-50 or Shepadex G-100 and fraction collector is necessary for the sepearte treatments of this enzyme. After washing it with organic solvents as aceton-EtOH, etc., it should be dried on the vacuum dryer at $40^{\circ}C$) The protease activity is determined by the amounts of amino acids, tyrosine. 4) The optimum pH of neutral protease is 6.0-8.0. 5) In effectively decomposing with this neutral protease, the optimum temperature is $35^{\circ}C$. 6) It is interesting that the amounts of metal ion affects the activity of neutral protease. For examples, if it were treated with manganic ion, its activity would be more effective than any other that.

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.358-365
• /
• 2004

The photocatalytic oxidation of Rhodamine B(RhB) was studied using photocatalytic reactor filled with module of quartz tube. Module of quartz tube consisted of small quartz tube (inner diameter, 1.5 mm; outer diameter, 3 mm) bundle coated with powder $TiO_2$ and uncoated large quartz tube (inner diameter, 20 mm; outer diameter, 22 mm). Two 30 W germicidal lamp was used as the light source and the reactor volume was 0.5 l. The effects of parameters such as the coating materials and numbers, initial concentration, $H_{2}O_2$ dose and metal deposition (Ag, Pt and Fe) and simultaneous application of $H_{2}O_2$ and metal deposition. The results showed that the initial reaction constant of quartz module coated with powder $TiO_2$ was higher 1.4 time than that of the $TiO_2$ sol and optimum coating number is twice. In order to increase reaction rate, simultaneous application of photocatalytic and photo-fenton reaction using Fe coating and dose $H_{2}O_2$ dose increased reaction rate largely.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.385-392
• /
• 2000

The adsorption ability of dyes on chitin, a natural polymer was investigated for decolorization of dye wastewater. Chitin was manufactured in lab by decalcification in dilute aqueous HCI solution and deproteination in dilute aqueous NaOH solution with shrimp shells. Absorbance of residue solution of dyebaths after dye adsorptions of chitin were measured in varieties of dye concentration and dipping periods. Four kinds of dyestuffs were used, C.I.Acid Blue 29. C.I.Direct Blue 6, C.I.Reactive Orange 12 and C.I.Basic Red 18. When chtin 1g was dipped in 0.05% of dyebath with stirring, maximum adsorption ratio of each kind of dyes was exhibited as 91.6% for C.I.Acid Blue 29, 95% for C.I.Direct Blue 6, 58.2% for C.I.Reactive Orange 13 and 75.8% for C.I.Basic Red 19. It shows that chitin has better adsorption abilities of ionic dyes of acid, direct and basic dye than non-ionic reactive dye. And chitin has better adsorption abilities of anionic acid direct dyes than cationic basic dye because of the presence of nitrogen atoms. All kinds of dyestuffs used showed speedy absorption effects by chitin, so chitin can absorb much amount of dyes in 5 mimutes reach to equilibrium of adsorption in 2 hours after dipping. Basic dye was absorbed the most speedily in 5 minutes, although maximum adsorption ratio is not high. That reason can be thought that chitin surface is essentially negatively charged due to polar funtional groups.

• Journal of Fashion Business
• /
• v.18 no.1
• /
• pp.149-163
• /
• 2014

The purpose of this study is to investigate and analyze the actual conditions of consumer damage occuring in the use of clothing products. The data used for analysis included 470 cases, which were deliberated by requesting consumer disputes deliberation at the consumer consultation room of Masan YWCA at the Kyeongsangnamdo Consumer Life Center belonging to the Kyeongnam provincial office. The disputes regarding the clothing products insisted that consumers suffered damage for the period from March, 2011 to June, 2013. The data processing was carried out by SPSS 14 and the statistics techniques used went through a cross tabulation analysis and ${\chi}^2$-test. The results are as follows. The difference in the analysis result of purchase path and material as to kinds of clothing products showed a significant difference. The damage types of clothing products were classified into five types: change of color, change of style, change of surface and touch, breakage of subsidiary materials, and others. The damaged clothing products showed a difference for damage frequency according to the items of clothing products; in particular, damage frequency for change of color appeared high. The damage contents of change of color were identified as metachromatism, discoloration and yellowing, stain occurrence, and decolorization. The damage responsibility for these clothing products appeared to be various as to clothing items, but was higher at dry cleaners and manufacturers.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.473-474
• /
• 2000

Ozone has a potency for disinfection, deodorization, decolorization and decomposition of organic materials by strong oxidation. therefore we used the ozonizer to disinfection and deoderization of a piggery. CFU of the ozonated piggery was lower than the others. And the of ozonizer was redesigned from open-type to close-type to obtain high ozone concentration. We was also investigated the effect of air velocity to ozone concentration.