• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.902-906
• /
• 2004

A separation principle of the Takagj-Sugeno (T-S) fuzzy-model-based observer-control is investigated. When the premise variables are able to be measured or directly computed from the outputs of the T-S fuzzy system and the fuzzy inference rules for the plant, control, and observer share the premise parts, the T-S fuzzy-model-based observer and the T-S fuzzy-model-based control can be separately designed such that the global stabilizability is guaranteed by the fuzzy observer-based output-feedback control. In this case, the global separation principle is well established. On the other hand, when the premise variables are unmeasurable or cannot be computed from the outputs, they should also be estimated. We examine the separation principle of this case. If the decay rates of the T-S fuzzy-model-based control and observer are sufficiently fast, the global separation is assured. Otherwise we show that the separation principle holds locally.

• Journal of Environmental Science International
• /
• v.26 no.2
• /
• pp.211-220
• /
• 2017

For areas with the diverse contamination sources, the change of 4-nitrophenol contamination and impact of potential contamination sources have been evaluated using monitoring data and a numerical model (HydroGeoSphere). The model considered several parameters including land cover, precipitation, and flow rate. And, the model has been performed to investigate the effect of decay rate of 4-nitrophenol. The results of the simulations showed that the influence on 4-nitrophenol in downstream was mainly greater than that in upstream, and the tributaries did not significantly affect the mainstream because of their low flow rates. In addition, the effect of contamination sources was simulated for each section, then the measured data were higher than the corresponding simulated data in most sections of the Geumho river. In particular, the impact of the potential contamination sources in the upstream area was much higher than that in the other area, thus more monitoring data for the upstream area is required.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.7
• /
• pp.683-687
• /
• 2012

The purpose of this paper is to numerically study the characteristics of the indoor air flow of a square ceiling type diffuser according to the vane angle and flow rate. The CFX of ANSYS 13.0 was used for the CFD tool. The size of the room is $6m(X){\times}6m(Y){\times}2.7m(Z)$. The exhaust diffuser was positioned diagonally to the supply diffuser. This diffuser was designed to have many holes, so the air supply had long throw patterns with low velocity decay. The characteristics of the indoor air flow was studied at volume flow rates of 5.1 CMM and 7.4 CMM, and a vane angle from $30^{\circ}$ to $60^{\circ}$, every $10^{\circ}$.

• Progress in Medical Physics
• /
• v.3 no.1
• /
• pp.9-18
• /
• 1992

In this study, beta-eucryptite is fabricated and the thermal parameters of this material have been investigated. The thermoluminescence from 4MeV X-ray irradiated beta-eucryptite have been measured over the temperature range of 300K-600K. Thermoluminescence curve from X-ray irradiated beta-eucryptite shows five peaks located at 342K, 392K, 438K, 474K, and 527K. $\tau$, $\delta$ and $\omega$ of peak at 527K are 35K, 39K and 74K, respectively and this peak is found to be 2nd order kinetics. The activation energy of peak shape method is calculated to be 1.03eV and the frequency factor for 527K curve is calculated to be 3.9x10$\^$8/sec$\^$-1/. Based on the various heating rates methods, the activation energy of the peak is computed to be 1.02${\pm}$0.05eV that is similar to 1.19${\pm}$0.03eV of initial rise method. The linearity of thermoluminescence intensity and radiation flux is valid up to 50Gy and beyond higher dose the supralinearity and saturation come out.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.502-509
• /
• 1997

Aromatic pollutants(benzene, toluene, ethylbenzene and xylenes) were photodegraded by using a UV oxidation and the rates of degradation were investigated under various reaction conditions. Each of the solution containing 50 ppm benzene, 150 ppm ethylbenzene and 250 ppm xylenes was found UV-photodegraded over 90% in 1 hour of reaction time, wheras the only was 43 % degradation was obtained with 350 ppm toluene solution. A single component solution was more degradable than a mixed component solution and benzene was almost photodegraded at a pH 4.0, 6.4 and 10.0 after reaction time is 1 hr, ehtylbenzene was photodegraded about 92%(pH 4.0), 90%(pH 6.4) and 91%(pH 10.0), xylenes was photodegraded about 95%(pH 4.0), 90%(pH 6.4) and 92%(pH 10.0), but toluene was photodegraded about 80%(pH 4.0), 43%(pH 6.4) and 70%(pH 10.0), respectively. Kinetics studies show that the rate of decay in TOC(total organic carbon) were pseudo first-order rate except ethylbenzene, and then we could evaluate mineralization rate constants(k) of aromatics.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.4
• /
• pp.49-56
• /
• 1992

Seven white rot fungi (Irpex lactenis, Coriolus hirsutus, Lopharia mirabilis, Schizopora paradoxa, Ganoderma lucidum, Pleurotus ostreatus and Pycnoporus coccineus) native to Korea and two famous exotic lignin degradable white rot fungi (Coriolus versicolor and Phanerochaete chrysosporium) were investigated to clarify their physiological and physicochemical characteristics on white-rotted wood blocks. G. lucidum degraded wood blocks more seriously than those by exotic lignin-degrading fungi, C. versicolor and P. chrysosporium, but only slightly decreasecl the strength of wood which was compared to the weight loss, persumably on the account of its small use of cellulose when attacking wood. It is quite interesting to note that the holocellulose degradation rate of G. lucidum was also higher than any of the other tested fungi. The order of fungi, according to the lignin-decomposing rates, was G. lucidum>P. coccineus>C. versicolor>S. paradoxa>P. chrysosporium>L. mirabilis>P. ostreatus>C. hirsutus>I. lactenis. The lignin degradation of G. lucidum and P. coccineus which were collected in Korea was greater than that of C. versicolor and P. chrysosporium. If holocellulose degradation is not considered. G. lcidum has the merit of actual application in biomass conversion due to linin removal.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1417-1426
• /
• 2001

Turbulent flow characteristics in the near wake of a square cylinder have been studied experimentally by using a Digital PIV method. Experiments are performed at the Reynolds numbers of 1600 and 3900 based on the free-stream velocity and the square height. The ensemble averaged turbulence statistics are acquired from 2030 realizations of instantaneous fluctuating velocity field after the conventional Reynolds decomposition. The differences in turbulent intensity and Reynolds shear stress profiles fur both oases indicate that the effect of Reynolds number seems to be descernible mainly due to the occurrence of transition in the separated shear layer. Because of the periodic nature of vortex shedding process, transverse velocity fluctuations contribute dominantly , to turbulent kinetic energy distribution. A comparison with previous LDV data obtained at much higher Reynolds number shows a fairly good agreement each other. It turns out that the effect of Reynolds number diminishes as increasing Reynolds number, which is a well-known feature of a sharp-edged bluff body wake. The streamwise variation of turbulence intensities are compared with those from a circular cylinder along the centerline at the same Reynolds number. The overall magnitudes and the decay rates of turbulence intensities are quite similar, but some differences are noticeble especially in the transverse intensity variation.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.381-384
• /
• 2002

Response surface methodology (RSM) was successfully applied to optimize for the production of Ganoderma lucidum in batch fermentations using the whey (40,000 mg latose/L) as substrate. This study was performed according to the central composite design (CCD) with respect to pH and temperature, where the designed intervals were 3.3$22.9^{\circ}C$$37.1^{\circ}C$, respectively. A second-order factorial design of the experiments was used to build empirical models providing a quantitative interpretation of the relationships between the two variables. The optimum conditions to maximize the production of G. lucidum were pH 4.2 and $28.3^{\circ}C$. At optimum conditions, the mycelial dry weight (MDW) and residual soluble COD (SCOD) were simultaneously used to evaluate the biokinetic coefficients assocoated with substrate inhibition model by nonlinear least squares method with 95% confidence interval. The. maximum microbial growth rates (${\mu}m$), half saturation coefficient ($K_s$), and the inhibition substrate concentration ($K_{is}$) were determined to be 0.095 l/hr, 128,000 mg SCOD/L and 49,000 mg SCOD/L, respectively. And the microbial yield coefficient (Y), biomass decay rate coefficient ($K_d$), and the maintenance energy coefficient ($m_s$) were determined to be 0.37 mg MDW/mg SCOD, 0.001 1/hr, and 0.0015 1/hr, respectively.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.155-158
• /
• 2003

Time-dependent flow properties of mustard pastes were measured at various total solid contents $(TS,\;18{\sim}30%)$ and shear rates $(15{\sim}25\;s^{-1})$ using a Haake concentric cylinderical viscometer. Experimental data of the stress decay with time of shearing were fitted to three mathematical models proposed by Weltman, Figoni and Shoemaker, and Hahn. Time-dependent flow behaviour of mustard paste increased with increase in TS, but was found to vary in the range of shear rate investigated. Time-dependent model of Weltman was found to be most applicable $(average\;R^2=0.96)$ for mustard paste. Shear stresses for structure breakdown increased with increase in TS, while the structure breakdown rate decreased.

• The Korean Journal of Ecology
• /
• v.5 no.4
• /
• pp.204-210
• /
• 1982

Comparative study of the biomass productioin and the cyclings of nitrogen, phosphorus and potassium was carried out on the east and the northwest facing slope in the montane grassland of Mt. Soback. The maximum productin during the growing season in the east and the northwest slope were 1, 150g/m2.yr, and 755g/m2.yr. in the August, respectively. The positive correlation was appearent between biomass production and A-layer depth of the soil and the correlation coefficient (r=.964) was very significant at 1% level. In the above ground materials, the nutrients contents were high at the early of the growing season but decreased gradually. In roots, however, there are no significant trend throughout the growing season. Total amounts of minerals uptaken by plants during the growing season in the east and the northwest site were 18.20 and 10.66g/m2.yr for N, 0.06 and 0.03g/m2.yr for P, 0.23 and 0.11g/m2.yr for K, respectively. the minerals returned to the soil by litter decomposition and roots decay in the east and the northwest site were 16.19 and 9.62g/m2.yr for N, 0.046 and 0.021g/m2.yr for P, 0.211 and 0.099g/m2.yr for K, respectively. The turnover the rate (absorbed/returned) of the nutrients in the east and the northwest site were 1.13 and 1.14 for N, 1.30 and 1.43 for P, 1.09 and 1.11 for K, and the absorption rates of minerals were 0.39 and 0.29% for N, 3.16 and 1.88% for P, 0.91 and 0.57% for K, respectively.