• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.415-420
• /
• 2018

The Energy Efficiency Design Index (EEDI) introduced by the Marine Environment P rotection Committee(MEPC) in International Maritime Organization(IMO) has significantly assisted in regulating CO2 emissions. However, in adverse weather conditions, it can lead to accidents due to slow steaming of vessels and low engine propulsion power. In response to this issue, the MEPC presented guidelines for the minimum propulsion power of the main engine for maintaining the course of vessels in adverse weather conditions. However, the guidelines are only applicable for vessels with a deadweight of 20,000 tons, leaving out small and medium ships. This study evaluated vessels subject to the guidelines of minimum propulsion power and proposed revised guidelines. In addition, relevant cases of marine accidents were investigated with the aim of investigating the minimum propulsion power of main engine for medium and small ships not covered by the guidelines. In order to achieve this, engine propulsion power was analyzed according to the size of the affected vessels. The results obtained from this study could be used as a minimum power criterion that can be considered for ship building to reduce marine accidents in adverse weather for small and medium ships.

• Journal of Ocean Engineering and Technology
• /
• v.37 no.2
• /
• pp.58-67
• /
• 2023

While extensive research is being conducted to reduce greenhouse gases in industrial fields, the International Maritime Organization (IMO) has implemented regulations to actively reduce CO₂ emissions from ships, such as energy efficiency design index (EEDI), energy efficiency existing ship index (EEXI), energy efficiency operational indicator (EEOI), and carbon intensity indicator (CII). These regulations play an important role for the design and operation of ships. However, the calculation of the index and indicator might be complex depending on the types and size of the ship. Here, to calculate the EEDI of two target vessels, first, the ships were set as Deadweight (DWT) 50K container and 300K very large crude-oil carrier (VLCC) considering the type and size of those ships along with the engine types and power. Equations and parameters from the marine pollution treaty (MARPOL) Annex VI, IMO marine environment protection committee (MEPC) resolution were used to estimate the EEDI and their changes. Technical measures were subsequently applied to satisfy the IMO regulations, such as reducing speed, energy saving devices (ESD), and onboard CO₂ capture system. Process simulation model using Aspen Plus v10 was developed for the onboard CO₂ capture system. The obtained results suggested that the fuel change from Marine diesel oil (MDO) to liquefied natural gas (LNG) was the most effective way to reduce EEDI, considering the limited supply of the alternative clean fuels. Decreasing ship speed was the next effective option to meet the regulation until Phase 4. In case of container, the attained EEDI while converting fuel from Diesel oil (DO) to LNG was reduced by 27.35%. With speed reduction, the EEDI was improved by 21.76% of the EEDI based on DO. Pertaining to VLCC, 27.31% and 22.10% improvements were observed, which were comparable to those for the container. However, for both vessels, additional measure is required to meet Phase 5, demanding the reduction of 70%. Therefore, onboard CO₂ capture system was designed for both KCS (Korea Research Institute of Ships & Ocean Engineering (KRISO) container ship) and KVLCC2 (KRISO VLCC) to meet the Phase 5 standard in the process simulation. The absorber column was designed with a diameter of 1.2-3.5 m and height of 11.3 m. The stripper column was 0.6-1.5 m in diameter and 8.8-9.6 m in height. The obtained results suggested that a combination of ESD, speed reduction, and fuel change was effective for reducing the EEDI; and onboard CO₂ capture system may be required for Phase 5.

• Journal of Navigation and Port Research
• /
• v.48 no.1
• /
• pp.49-54
• /
• 2024

This paper investigated the impact of economic cycles in the shipbuilding industry on managerial performance of marine paint and coatings firms. As part of the upstream to ship construction, the marine equipment industry plays a critical role in determining the competitiveness of the shipbuilding industry. Despite a close interaction between the two sectors, the majority of research on the marine equipment industry has highlighted securing competitiveness edge and developing advanced technologies, paying little academic attention to the relationship between shipbuilding and managerial performance. In this regard, this paper examined how economic cycles in shipbuilding affected growth and profitability of marine paint and coatings firms. To this end, managerial performances of six marine paint and coatings firms for the period of 2003-2022 were analyzed in panel regressions. Results indicated that the shipbuilding economic cycle proxied by delivery amounts of Korean shipyards was positively associated with growth and profitability of marine paint and coatings firms. However, there was divergence in statistical significance by shipbuilding indicators. While coefficients of compensated gross tonnage, gross tonnage, and monetary amount were statistically significant, that of deadweight tonnage was not. Findings of this study imply that managerial performances of marine paint and coatings firms are affected by the amount of value added from the shipbuilding industry rather than its absolute size.