• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.629-631
• /
• 2000

This paper deals with the design of a inner rotor type Brushless DC (BLDC) motor for Electric Power Steering to reduce the cogging torque. The effect of the design parameters on the characteristic and cogging torque is analyzed by Finite Element Method (FEM). The considered design parameters are as follows : the number of pole and slot. dead-zone and skew angle. and teeth shape. The winding resistance of each motor is calculated and the characteristic curve is derived from considering reactance drop voltage for original model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.3097-3099
• /
• 2000

In this paper, we design PLL for a low jitter and fast locking time that is used a new simple precharged CMOS phase frequency detector(PFD). The proposed PFD has a simple structure with using only 18 transistors. Futhermore, the PFD has a dead zone 25ps in the phase characteristic which is important in low jitter applications. The phase and frequency error detection range is not limited as the case of other precharge type PFDs. the simulation results base on a third order PLL are presented to verify the lock in process with the proposed PFD. the PLL using the new PED is designed using 0.25${\mu}m$ CMOS technology with 2.5V supply voltage.

• 산업경영시스템학회지
• /
• 제21권46호
• /
• pp.159-166
• /
• 1998

Estimating the temperature distribution of a refrigerator-room is important for preventing the over-refrigeration and improving its operating efficiency. It is also necessary in the realization process of the concentrated refrigeration function which has been provided recently as a generalized function in many refrigerator models. In this paper, we investigate the estimation problem of temperature in refrigerator-room and propose a fuzzy adaptive model. The model is unique in that it employs the concept of the fuzzy dead zone in order to improve the accuracy of estimation. The obtained results are then used for determining the optimal position of a temperature sensor.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.77-81
• /
• 2010

This study carried out hydraulic model test for water circulation system in Cheongna district as part of Incheon Free Economic Zone. Canal way project of Cheongna was planned to establish for environment-friendly water circulation system, improve quality of life and diversification of traffic through using boat as a water-friendly international business city. The navigation canal, There are two intake facility in central park and it can purify water 15,000$m^3$ per day. After purify, water move to 8 facility of water culture area which supplies water in canal way. This process called water circulation system in cheongna. Also, there are several flow induction machine in canal way except south-north way. Therefore, this study will verify about validity of water circulation system's safety through hydraulic model test.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.640-646
• /
• 2011

The current study presents the design and performance of a novel 4/2 switched reluctance motor (SRM) for a high-speed air blower. With a comparative study of some rotor structures for a high-speed drive, a stepper-type rotor is optimized to produce a continuous torque and a low torque ripple. Rotor pole arc is modified to have a wide continuous output torque region, and air gap is determined to develop less torque ripple. The rotor radius is determined to reduce torque ripple with a reiterative FEM analysis. The designed rotor has three regions: short uniform, long uniform, and nonuniform air-gap region. The positive torque region is wider than a conventional 4/2 SRM without any torque dead zone. A prototype is tested and the efficiency is up to 72[%] at 30,000[rpm], 600[w] output.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.184-189
• /
• 2013

Compared to a multiphase SRM, a single-phase SRM has some advantages, such as lower number of switches and power converter size, which leads to gradually increasing in the household appliances and industrial applications. But the torque dead zone is existed in the single-phase SRM which decreases the starting capability of the motor and increases the torque ripple. In order to solve the aforementioned problems, a single-phase hybrid SRM with commercial ferrite permanent magnet is proposed in this paper. Basic design principle for the proposed structure is described. To verify the proposed structure, FEM is employed to get the characteristics of the proposed structure. Based on the analysis, a prototype is designed and manufactured. And, the experimental system is also constructed. The validity of the proposed structure is verified by the experimental results.

• 한국군사과학기술학회지
• /
• 제5권1호
• /
• pp.45-58
• /
• 2002

In this paper, we designed the circuit of drive control for towing winch. It is composed of reference voltage circuit for driving voltage reference, low pass filter circuit for noise reduction, dead zone circuit for initial transient input, and driving circuit for drum direction/velocity control. Also it is realized a drive control circuit for towing winch drum in accordance with PWM(pulse width modulation) method to suit it's purpose of a large capacity driving system. The performance of the designed circuit is analyzed by experiments and the appliablity for driving the towing winch drum satisfactorily is evaluated through a various testing.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.246-247
• /
• 2012

역률개선용 AC/DC Flyback 컨버터의 경우 우수한 역률을 획득할 수 있으나 코어손실이 크고 효율이 낮으며 반면 Forward 컨버터의 경우 코어손실이 작아 높은 효율을 획득할 수 있으나 Dead zone이 존재하여 고역률 획득이 어려운 단점을 갖는다. 따라서 본 논문에서는 Forward 컨버터와 Flyback 컨버터의 장점을 동시에 구현할 수 있는 고효율 및 고역률 Balanced forward-flyback 컨버터를 제안한다. 제안된 컨버터는 스위치 온 시 Forward 컨버터로 동작하며 스위치 오프 시 트랜스포머 자화인덕터 리셋을 위해 Flyback 컨버터로 동작하므로 고역률 및 고효율 획득이 가능하며 Forward 및 Flyback 컨버터가 다루는 에너지량이 전류평형 캐패시터에 의해 항상 절반씩 배분되므로 AC입력전압의 크기에 관계없이 항상 고효율 획득이 가능하다. 제안된 회로의 타당성 검증을 위해 이론적 분석결과와 24W급 LED 조명 회로에 적용한 실험결과를 제시한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.365-366
• /
• 2012

본 논문은 LED 조명용 구동회로에 적합한 새로운 단일전력단 역률개선 Forward-Flyback 컨버터를 제안한다. 제안된 컨버터는 기본적으로 Forward 컨버터로서 동작하므로 트랜스포머 자화인덕터 전류의 오프셋을 최소화 할 수 있으며 스위치 오프 시 트랜스포머 자화 인덕터 전류를 Flyback 동작에 의해 출력 측으로 회생시킴으로서 순환전류를 최소화 할 수 있다. 뿐만 아니라 기존 Forward 컨버터의 경우 입력전압이 낮은 영역에서 큰 Dead zone이 존재하므로 고역률의 획득이 어려우나 제안된 회로의 경우 매 스위칭 시 Flyback컨버터 동작을 동시에 수행하므로 높은 역률을 획득할 수 있다. 최종적으로 제안된 회로의 우수성 검증을 위해 24W급 조명용 LED 구동회로의 시작품을 제작을 통한 실험 결과를 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.890-893
• /
• 2003

In this paper, we have designed the fractional-N frequency synthesizer for bluetooth system using 0.35-um CMOS technology and 3.3-V single power supply. The designed synthesizer consist of phase-frequency detector (PFD), charge pump, loop filter, voltage controlled oscillator (VCO), frequency divider, and sigma-delta modulator. A dead zone free PFD is used and a modified charge pump having active cascode transistors is used. A Multi-modulus prescaler having CML D flip-flop is used and VCO having a tuning range from 746 MHz to 2.632 GHz at 3.3 V power supply is used. Total power dissipation is 32 mW and phase noise is -118 dBc/Hz at 1 MHz offset.