• The Microorganisms and Industry
• /
• v.19 no.4
• /
• pp.2-13
• /
• 1993

Some microorganisms, including actinomycetes, cyanobacteria, and other bacteria, algae, fungi, and yeast, can accumulate and retain relatively high quantities of heavy metals and radionuclides from their external environments (1-4). Both living and dead cells can be used for biosorptive metal/radionuclide removal from solution. Thus microorganisms and products excreted by or derived from microbial cells (2) may provide an alternative or adjunct to conventional techniuqes of metal removal and recovery. Recent approaches have separated the microbial growth and metal removal process to manipulate production of metal-adsorptive capacity of bacteria and metal removal process. If pre-grown cells are immobilized and used for metal removal, mathematical modeling can be applied to predict immobilized cell reactor behavior under specific process conditions. Waste and microbial adsorbent could be separated from the treated flow in one step. Once treated, the metal waste is concentrated in a small volume of sorbed form for easy metal disposal or recovery.

• Tunnel and Underground Space
• /
• v.5 no.1
• /
• pp.48-56
• /
• 1995

Recently, most of the underground excavation works are adopting heavy duty mobile diesel equipments which have outstanding merits in view of efficiency. However, these equipments are causing hygienic problems to the workers due to the various hazardous exhaust contaminants. Considering that there are always dead end workings in underground excavation sites, it is very important how to supply enough airflow to the workings to dilute diesel exhaust contaminants. This paper introduced the theoritical mechanism and actual trends of exhaust contaminants of diesel equipments under operation at local mines and suggested the design method of intake air volume in underground excavation workings using diesel equipments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.476-479
• /
• 2002

The ageing cause in many porcelain suspension insulators which occur on transmission and distribution line with dead-end stings is mechanical stress in interface between porcelain and cement materials. It is known that the principal mechanical stress which give electrical failure is the results of the displacement is due to cement growth. We studied the effect of cement displacement resulting environmental ageing parameters on porcelain insulator mechanical properties for transmission line by simulation (ANSYS/NASTRAN program) and test methods. These simulation analysis and experimental results show that cement volume growth affects severely to be mechanical failure ageing.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.156-160
• /
• 2009

This paper presents the interleaved active-clamping ZVS(Zero Voltage Switching) forward converter, which is mainly composed of two active-clamping forward converters. Only two switches are required, and each one is the auxiliary switch for the other. The circuit complexity and cost are thus reduced. The leakage inductance of the transformer or an additional resonant inductance is employed to achieve ZVS during the dead times. The duty cycles are not limited to be equal and within 50%. The complementary switching and the resulted interleaved output inductor currents diminish the current ripple in output capacitors. Accordingly, the smaller output chokes and capacitors lower the converter volume and increase the power density. Detailed analysis and design of this new interleaved active-clamping forward converter are described.

• Journal of Biosystems Engineering
• /
• v.27 no.1
• /
• pp.33-38
• /
• 2002

The indicated power of Stirling engine was affected by the heat exchange effectiveness of the regenerator. The temperature difference of working fluid between the expansion and the compression space of Stilting engine depends on the heat exchange effectiveness of the regenerator. The influence of the temperature ratio of expansion space to compression space of Stirling engine on the indicated power was analyzed by using Schmidt analysis in this study. In the Stirring engine, as the temperature ratio increased, the indicated power generally decreased. Therefor, it is necessary to develope the regenerator of high effectiveness. The actual indicated power was shown 64.9 percent of the predicted indicated power in maximum and 47.2 percent of that in minimum due to increased dead volume of engine, the loss of flow friction and heat transfer in the regenerator.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.39-46
• /
• 2016

This paper reviews design validity before manufacturing HCVT prototype through simulation. The component part is being devided, modeled and checked if it works well to an designer's original intent about some active modes. Also, the dynamic characteristic is examined how it changes according to alteration of pressure, friction and leak rate. Finally, HCVT design plan is being confirmed if it could be materialized through those analysis.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.288-294
• /
• 2003

Increasing the volume of traffic on the roads causes social and economical problems such as increasing air-pollution and distribution cost. Prefabricated light weight bridge becomes a possible solution for these problems in the urban area where it is difficult to construct new one or expend the existing road. There are some merits in this kind of bridge. First, the design live and dead loads are minimized by allowing only passenger cars. Second employing prefabrication construction scheme reduces the construction time. Third, there is no need to buy land if the elevation road is placed on the top of existing one. In seismic design of bridges, base isolation has been an effective solution when the bridge has stiff piers and a heavy superstructure. The prefabricated light weight bridge has different dynamic characteristics from the ordinary bridges. In this paper, the applicability of base isolators such as lead rubber bearing and elastomeric bearing, to prefabricated light weight bridge is examined.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.1
• /
• pp.87-92
• /
• 1991

A dual capillary column system is described for the simultaneous measurement of retention index (RI) and area ratio (AR) values of each peak on two capillary columns of different polarity, DB-5 & DB-1701. Both capillary columns were connected to a common splitless injector via a deactivated fused-silica capillary tubing of 1 m length and a 'Y' splitter, the dead volume effect of which was found to be negligible. RI and AR were measured with high reproducibility(${\leq}$0.05% RSD) and with high accuracy (<10% RE), respectively. When applied to the test samples of the organic acid mixture, each acid was positively identified by the combined computer RI library search-AR comparison.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.227-237
• /
• 1999

As the interface bonding phenomenon between the matrix and the reinforcements has a large effect on the mechanical properties of MMCs, a sugestion of the strength analysis technique considering the residual stress and the interface bonding phenomenon is very important for the design of pans and the estimation of fatigue behavior. In this paper the three dimensional finite element anaysis is performed during the elasto-plastic deformation of the particulate reinforced metal matrix composites. It was analyzed with the volume fractions in view of microscale. Bonding strength. interface separation and matrix void growth between the matrix and the reinforcements will be predicted on deformation under tensile loading. An interface seperation is estimated by the fracture criterion which is a critical value of generalized plastic work per unit volume. The shape of the reinforcement is assumed to be a perfect sphere. And the type of the reinforcement distribution is assumed as FCC array. The thermal residual stress in MMCs is induced by the heat treatment. It is included at the simulation as an initial residual stress. The element birth and death method of the ANSYS program is used for the estimation of the interface bonding strength, void generation and propagation. It is assumed that the fracture in the matrix region begin to occur under the external loading when the plastic work per unit volume is equal to the critical value. The fracture strain will be defined. The experimental data of the extruded $SiC_p$>/606l Al composites are compared with the theoretical results.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.2
• /
• pp.156-162
• /
• 2001

Objective : The purpose of this study is to review our experience with spontaneous thalamic hemorrhage. Clinical outcome of patients was brought about by comparing stereotactic aspiration and conservative medical therapy. Methods : The study consists of seventy-three cases with spontaneous thalamic hemorrhage which were treated from the period of Jan. 1993 to Dec. 1999. Thirty-eighty patients were treated with computed tomography (CT) guided stereotactic aspiration and thirty-five patients were treated conservatively. We compared the factors affecting treatment and the factors are as follows : age & sex, conscious level on admission, hematoma volume, hematoma sites, presence of ventricular penetration. Results : The results in the thirty eight stereotactic aspirated cases for the 6 months from oneset are as follows : good recovery or moderate disability in 43%, severe disability in 32%, vegitative state in 11%, dead in 13% respectively. The clinical result was more favorable in stereotactic aspiration, with 11-30cc hematoma volume, extend to internal capsule of hematoma, poor conscious level on admission than conservative medical therapy. But age & sex, conscious level on admission, presence of ventricular penetration were not influential in the statistical outcome between stereotactic aspiration and conservative medical therapy. Conclusion : Treatment modality of spontaneous thalamic hemorrhage is still controversial. But stereotactic aspiration is more recommended for improvement therapeutic results than conservative treatment or open craniotomy in case of 11-30cc hematoma volume, extend to internal capsule of hematoma and poor conscious level on admission.