• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.77-82
• /
• 1994

The maturity concept proposes that concrete of the same mix at the same maturity has the same strength, whatever combination of temperature and time makes up that maturity. Maturity is the integral of time and temperature of concrete above a datum temperature. Tests are conducted in order to determine a datum temperature and to measure compressive strengths and maturity of test specimens. This study also proposes some appropriate functions to represent the relationship between maturity and strength development.

• 콘크리트학회지
• /
• 제10권6호
• /
• pp.191-202
• /
• 1998

콘크리트의 강도발현을 양생온도와 재령의 함수로 나타내는 적산온도 방법은 시멘트 콘크리트의 강도추정에 폭넓게 사용되어 왔다. 본 연구에서는 열경화성인 불포화 폴리에스터 수지를 결합재로 한 경량 폴리머 모르터를 대상으로 하여 적산온도법에 의한 초기강도 추정방법을 구명하였다. 폴리머 모르터의 압축강도는 가사시간 및 강도발현성에 영향을 미치는 촉매 및 촉진제 첨가량을 변화시켜 실험하였으며, 또한 적산온도 이론식에 사용되는 기준온도를 산출하였다. 적산온도는 추정된 기준온도를 적용시킨 적산온도 이론식에의해 산출하였으며 경량폴리머 모르터의 압축강도는 적산온도-압축강도의 관계로부터 추정할 수 있었다. 이 연구에서 얻어진 적산온도법에 의한 경량 폴리머 모르터의 강도추정식은 열경화성 수지를 이용한 각종 폴리머 모르터나 콘크리트에도 적용가능할 것으로 판단된다.

• 콘크리트학회지
• /
• 제8권3호
• /
• pp.197-207
• /
• 1996

성숙도는 콘크리트의 양생 온도이력에서 구해지는 것으로 초기강도 예측을 위한 하나의 유용한 지표가 될 수 있다. 즉 성숙도 이론은 배합이 동일할 때 성숙도 값이 같으면 강도값은 같다는 이론이다. 본 연구에서는 성숙도 법칙의 이론적 전개과정을 살펴보고 그 값을 계산하기 위하여 가장 널리 알려진 Nurse-Saul함수를 검토하였다. 또한 성숙도 함수와 기준온도(datum temperature) 설정을 위한 일련의 포괄적인 실험연구를 수행하였다. 성숙도를 강도값에 연관시키기 위한 여러 가지 성숙도-강도함수를 비교해보고 그 장단점을 분석해 보았으며 이를 통하여 유용한 강도예측함수를 제안하였다. 성숙도 이론의 적용에 있어서 고려해야 할 변수들을 도출하기 위하여 양생조건과 시멘트의 종류, 그리고 물-시멘트비등을 달리 하였으며 이 경우에는 습도나 초기양생온도 등이 변수로 채택되었다. 마지막으로 제안된 함수의 타당성과 정확성을 검증하기 위하여 콘크리트 슬래브를 타설하고 시간단계별로 콘크리트 코아를 채취하여 예측된 강도값과 비교하여 보았다. 본 논문은 실제 콘크리트 구조물의 초기강도 예측을 위해 매우 유용할 것으로 사료되며 현장품질관리에 효율적으로 활용할 수 있을 것으로 기대된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.325-330
• /
• 1999

The objectives of this study were to compare the development of compressive strength of epoxy resin mortars used as repairing materials with respect to maturity, and to propose a predictive model for strength development of epoxy resin mortar. A series of tests were carried out for the hardener contents of 30, 40 and 50 percentage of resin and compressive strength were measured at the of 6, 12, 24, 72, 120 and 168 hours respectively under temperature of 0, 10, 20 and 3$0^{\circ}C$. The datum temperature was estimated by measured strength, and the maturity is calculated with the estimated datum temperature. The compressive strength of epoxy resin mortar could be predicted by regression analysis from the maturity-compressive strength relationship.

• 한국농공학회지
• /
• 제42권2호
• /
• pp.99-107
• /
• 2000

The objective of this study are to compare the development of compressive strength of epoxy mortars used as repairing materials with respect to maturity , and to propose a model predicting strength development of epoxy mortars. A series of tests are carried out for the hardener contents of 30, 40 and 50 percentage of epoxy resin and compressive strengths are measured at the age of 6, 12, 24, 72, 120 and 168 hours respectively under the cure temperature of 0, 10, 20 and 3$0^{\circ}C$. The datum temperature is estimated by measured strengths, and the maturity is calculated with the estimated datum temperature. The compressive strength of epoxy mortars can be predicted by regression analysis from the maturity-compressive strength relationship.

• Journal of Ecology and Environment
• /
• 제41권3호
• /
• pp.45-53
• /
• 2017

Background: There have been many studies on the growth conditions of Zostera marina and Zostera japonica, but few studies have examined how spatial and temporal factors affect growth in established seagrass beds or the distribution range and shoot density. This study aims to clarify the factors that determine the temporal and spatial distribution of Zostera marina and Zostera japonica in the Seto Inland Sea east of Yamaguchi Prefecture. Methods: The study site is in Hiroshima Bay of the Seto Inland Sea, along the east coast of Yamaguchi Prefecture, Japan. We monitored by diving observation to confirm shoot density, presence or absence of both species and observed water temperature, salinity by sensor in study sites. Results: The frequency of occurrence of Zostera marina was high in all seasons, even in water depths of D.L. + 1 to -5 m ($80{\pm}34%$ to $89{\pm}19%$; mean ${\pm}$ standard deviation), but lower (as low as $43{\pm}34%$) near the breakwall, where datum level was 1 to 2 m, and it was further reduced in datum level -5 m and deeper. The frequency of occurrence of Zostera japonica was highest in water with a datum level of +1 to 0 m. However, in datum level of 0 m or deeper, it became lower as the water depth became deeper. Datum level +1 m to 0 m was an optimal water depth for both species. The frequency of occurrence and the shoot density of both species showed no negative correlation. In 2011, the daily mean water temperature was $10^{\circ}C$ or less on more days than in other years and the feeding damage by S. fuscescens in the study sites caused damage at the tips. Conclusions: We considered that the relationship between these species at the optimal water depth was not competitive, but due to differences in spatial distribution, Zostera marina and Zostera japonica do not influence each other due to temperature conditions and feeding damage and other environmental conditions. Zostera japonica required light intensity than Zostera marina, and the water depth played an important role in the distribution of both species.

• 설비공학논문집
• /
• 제1권1호
• /
• pp.1-8
• /
• 1989

This paper treats the temperature effectiveness of the two-fluid counterflow regenerator in a rotary type. To avoid continual interpolation and to obtain the simple result in calculating that, it obtained the particular solution for the direct-transfer-type counterflow heat exchanger by the graphical procedures. Also, it introduced the empirical formula for the influence of the ratio of rotor matrix to minimum working fluid heat capacity rate with the particular solution induced. Particularly, substituting the published results of temperature effectiveness into the program, it obtained the simple and convenient equation which can applicate in the counterflow regenerator in a rotary type. To compare and discuss the results induced, selecting the regenerative air preheater and applying the their running datum and specifications to the related results, it shows that the above results are agree with the published results within absolute relative error, 3.0%.

• 한국산학기술학회논문지
• /
• 제6권4호
• /
• pp.302-308
• /
• 2005

구조가 복잡한 챔버의 온도분포와 유속변화를 연구하였다. 압축성 혹은 비압축성 유체, 층류 혹은 난류의 유속변화를 모델링 할 수 있는 FLUENT 프로그램으로 모사실험을 하였다. 챔버의 구조는 매우 복잡하여 단순화한 구조를 표준 $\kappa-\varepsilon$ 모델과 RNG $\kappa-\varepsilon$ 난류 모델 모사 실험하였다. 평가지역의 온도편차가 적은 것이 중요하다. 본 연구에서 얻은 챔버 내부의 온도분포와 유속변화 자료를 챔버의 제어 알고리즘을 향상하는 제공하였다. 개선된 제어 알고리즘을 이용하여 실제계에 적용한 결과 평가지역의 온도편차가 매우 개선되었다.

• 한국농공학회논문집
• /
• 제59권6호
• /
• pp.19-27
• /
• 2017

This study investigated to predict the compressive strength of unsaturated polyester resin based polymer concrete using the maturity method. The test results show that the development of the compressive strength increased exponentially until an age of 24 hours. After 24 hours, the development of the compressive strength just increased gradually. This test result shows that the strength of unsaturated polyester resin based polymer concrete was developed mainly at the early age. Estimated datum temperature of unsaturated polyester resin based polymer concrete was $-20.67^{\circ}C$ which was much lower than of datum temperature ($-10^{\circ}C$) of Portland cement concrete. Also, this study result shows that the existing maturity index associated with Portland cement concrete was not applicable for polymer concrete because curing time of Portland cement concrete is different clearly with curing time of polymer concrete. The cause of different curing time was that there were different curing mechanisms between Portland cement concrete and polymer concrete. In order to best apply the experimental data to a model, CurveExpert Professional, the commercial software, was used to determine the predictive model regarding the compressive strength of unsaturated polyester resin based polymer concrete. As a result, Gompertz Relation or Weibull Model was an appropriate model as a predictive model. The proposed model can be used to predict the compressive strength, especially, it is more useful when the maturity is in the range between $40^{\circ}C{\cdot}h^{0.4}$ and $900^{\circ}C{\cdot}h^{0.4}$.

• 한국정밀공학회지
• /
• 제32권4호
• /
• pp.387-394
• /
• 2015

We analyze heat generation as well as temperature distribution induced by accelerated electron impact on a target in a closed x-ray tube. For the sake of accuracy, we use Monte carlo analysis. This method gives accurate energy deposit in a medium with additional information such as secondary and backscattered electron as well as their paths. A Tungsten coated layer is divided by small rectangular cell which accumulate energy loss of primary electron beam. The cells and their accumulated energy datum are used for the input of finite element analysis. The Maximum temperature rising and temperature distribution were analyzed by transient heat analysis. Some temperature parameters such as target size and coating thickness were varied to investigate temperature sensitivity. Temperatures were compared each other to find primary variable that affect temperature rising on the x-ray target. The results will be helpful in development highresolution x-ray tube and related industries.