• 설비공학논문집
• /
• 제8권4호
• /
• pp.463-472
• /
• 1996

Experiments were carried out to study the operation characteristics of a regenerator with a thermo-syphon pump and a surface-flame burner for a lithium bromide (LiBr)-water absorption heat pump. A cylindrical-shape metal-fiber burner and commercial grade propane were used. The emission of carbon monoxide and nitric oxide was measured by a combustion gas analyzer. Ther regeneration rate of water vapor as a refrigerant was measured. It could be as a reference value showing the performance of the regenerator. The circulation rate of the LiBr-water solution was also measured from both the tanks for the weak-and the strong-solution. Using a refractometer, the LiBr concetration in the solution was calculated from the measured refractory index of the solution. Temperature of the solution and the condensed water was recorded at several points in the experimental apparatus with thermocouples, using a personal computer. This data collecting system for measuring temperature was calibrated with a set of standard thermometers. The generating rate of water vapor as refrigerant increased linearly with heat supplied. It was about 4.0g/s with the heat supplied at a rate of 16,500kcal/h. The circulation rate of LiBr solution also increases with the heat supplied. The difference in LiBr concentrations between the weak and the strong solution was in the range of 1 to 5% when the concentration of the strong solution was about 60%. It was dependent upon both the heat supplied and the circulation rate of the solution. The initial concentration and the level of the LiBr solution in the regenerator were measured and recorded before experiments. The effect of them on the generating rate of water vapor and the circulation rate of the solution was also studied. The generating rate of water vapor was not strongly dependent upon both the level of the LiBr solution and the initial LiBr concentration. However, the concentration difference of the solution increases with the initial level of the LiBr solution.

• 한국태양에너지학회 논문집
• /
• 제32권3호
• /
• pp.88-95
• /
• 2012

In this study, in order to utilize the seawater as a heat source at Gangneung city near the East Sea in Korea, an annual heating performance of a screw heat pump was simulated. For a simulation, the maximum heating capacity of heat pump was assumed at 3.5 MW. An ambient temperature at Gangneung city was calculated from the TMY2 weather data, while the seawater temperature was calculated from the regression equation based on the measurement by the National Fisheries Research and Development Institute of Korea. The heating load was assumed linearly dependent on the ambient temperature, while the maximum heating load was assumed to appear when the ambient temperature is below $-2.4^{\circ}C$, which is the temperature of TAC 2.5% for heating at Gangneung city. A heat pump performance at full-load was calculated from the regression equation, which involves refrigerant's evaporating and condensing temperatures, based on a commercial screw compressor performance map. A heating supply temperature which determines refrigerant's condensing temperature was assumed linearly dependent on the heating load. A performance degradation due to the part-load operation of heat pump was also considered. Simulation results show that an annual heating coefficient of performance ($COP_H$) of a seawater-source screw heat pump is approximately 2.8 and that it is necessary to improve part-load performance to increase an annual performance of the heat pump.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.488-493
• /
• 2012

In this study, in order to utilize the seawater as a heat source at Gangneung city near the East Sea in Korea, an annual heating performance of a screw heat pump was simulated. For a simulation, the maximum heating capacity of heat pump was assumed at 3.5 MW. An ambient temperature at Gangneung city was calculated from the TMY2 weather data, while the seawater temperature was calculated from the regression equation based on the measurement by the National Fisheries Research and Development Institute of Korea. The heating load was assumed linearly dependent on the ambient temperature, while the maximum heating load was assumed to appear when the ambient temperature is below $-2.4^{\circ}C$, which is the temperature of TAC 2.5% for heating at Gangneung city. A heat pump performance at full-load was calculated from the regression equation, which involves refrigerant's evaporating and condensing temperatures, based on a commercial screw compressor performance map. A heating supply temperature which determines refrigerant's condensing temperature was assumed linearly dependent on the heating load. A performance degradation due to the part-load operation of heat pump was also considered. Simulation results show that an annual heating coefficient of performance ($COP_H$) of a seawater-source screw heat pump is approximately 2.8 and that it is necessary to improve part-load performance to increase an annual performance of the heat pump.

• 전자공학회논문지
• /
• 제50권11호
• /
• pp.180-187
• /
• 2013

태양광 발전에서, 태양전지가 받는 태양광량은 발전량에 영향을 주는 가장 중요한 요소이다. 태양전지를 최대한 태양과 마주보도록 회전시켜주는 다양한 형태의 추적식 태양광 발전기가 개발되었으며, 특히 태양의 위치를 2개의 회전축을 이용하여 추적하는 2축식 추적방식이 발전효율을 높이는데 크게 기여하고 있다. 이러한 2축식 태양광 추적식 발전기 중에 경사각 종속형 방식은 초기 투자비용이 비교적 저렴하고 견고한 구조로 유지보수가 용이하기 때문에 실제 발전 현장에서 널리 이용하고 있지만, 회전 각도가 제한적일 수밖에 없는 구조적 특성 때문에 태양을 추적하는데 한계가 있어 발전효율이 상대적으로 낮다. 본 논문은 경사각 종속 2축식 태양광 발전기의 발전효율을 높일 수 있는 방법을 제안한다. 이를 위해 정확한 제어에 필요한 수식을 유도하고, 한 개의 축이 제한 각도에 도달했을 때에도 그 나머지 축으로 계속 추종해가도록 한다. 제안된 방법이 태양 전지에 입사되는 태양광량이 더 많아짐을 입증하기 위해 정확한 태양의 추종 및 제안방식으로의 운용에 필요한 수식들을 유도하고, 이를 한국천문연구원의 각 분기별 데이터에 적용하여, 회전 제한각도에서 기존의 운용 방식과 비교한 결과로 최대 11.1% 이상의 태양광을 더 받을 수 있음을 확인한다.

• 한국건축시공학회지
• /
• 제11권2호
• /
• pp.136-144
• /
• 2011

콘크리트 구조물의 골조공사에서의 주요 공정 중 하나인 거푸집 공사는 전체 건축공사의 공사기간 및 공사비 측면에서 상당 부분을 차지하고 있다. 하지만 공사현장의 조건을 고려한 거푸집의 적정시스템 선정은 현재까지 현장실무자의 경험에만 의존하고 있는 실정이다. 본 논문에서는 거푸집 공법 선정 요인에 대한 정량화된 분석을 바탕으로 슬래브 거푸집 중 신공법과 기존 공법을 선정하여 각 공법의 성능을 정량화된 분석데이터를 바탕으로 평가했다. 이를 통하여 각 공법들의 정성적 항목에 대한 정량화된 평가점수를 산출하여 슬래브 거푸집의 현장 적용성에 대한 평가 방안을 제시하였다. 따라서 본 논문에서 사용된 델파이 기법의 방법론은 다른 공법들의 선정, 평가에도 사용될 것이라 사료된다.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.231-236
• /
• 2014

오늘 날 산업이 발전함에 따라 전력에 대한 수요량이 증가하고 송전 용량이 커야할 필요성이 점차 요구되고 있다. 관련 설비들은 대규모화될 뿐만이 아니라 높은 신뢰성으로써 동작할 것을 요구받고 있다. 따라서 전기설비의 안정화는 매우 중요한 과제이다. 특히, 전기의 생산 및 공급 과정에서 요구되는 높은 신뢰성은 산업 사회의 필수적인 요소라고 할 수 있다. 설비의 사고 및 정전 사고등은 높은 전기적 의존을 가진 고도 산업사회에 막대한 경제적 손실 및 장애를 가져다준다. 우리는 이 논문에서 발전소에서 고전압의 생산 및 송배전의 유일한 전송 수단으로 사용하고 있는 고전압용 전력 케이블(power cable) 시스템의 안정된 동작을 판단하기 위하여, 아레니우스 인자를 따르는 절연 저항의 시간에 따른 변화추세를 파악하고, 열화의 마지막 단계로서 발생하는 파괴에 의한 케이블의 수명을 예측하고자 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1533-1538
• /
• 2011

The dynamic characteristics such as resonant frequencies and dampings have been utilized as important parameters in dynamic behavior and inverse analyses. In general, the dynamic parameters have been determined based on design and experimental data, but experimental studies on the time-dependent changes of the dynamic parameters during service have rarely been conducted. Especially, unlike highway bridges, it is much easier for railroad bridges to estimate accumulated amount of fatigue because of the controlled train operation, and the study of dynamic characteristic change due to fatigue is useful, since it can enhance the accuracy of dynamic analysis. In this paper, the dynamic characteristic change due to fatigue is measured via the modal test on the PSC girder during a fatigue test. The test specimen utilized in the test is the IT girder which enhances the sectional capacity of the conventional PSC girders. The test specimen is designed 10m long and the modal tests are conducted during the application of fatigue load two million times. The test result shows that considerable changes in the measured dynamic parameters are observed as the fatigue accumulates, and these changes during the service life should be considered in designing railroad bridges.

• 유통과학연구
• /
• 제14권2호
• /
• pp.41-45
• /
• 2016

Purpose - Finding an optimal path is an essential component for the design and operation of smart transportation or logistics network. Many applications in navigation system assume that travel time of each link is fixed and same. However, in practice, the travel time of each link changes over time. In this paper, we introduce a new transportation problem to find a latest departing time and delivery path between the two nodes, while not violating the appointed time at the destination node. Research design, data, and methodology - To solve the problem, we suggest a mathematical model based on network optimization theory and a backward search method to find an optimal solution. Results - First, we introduce a dynamic transportation problem which is different with traditional shortest path or minimum cost path. Second, we propose an algorithm solution based on backward search to solve the problem in a large-sized network. Conclusions - We proposed a new transportation problem which is different with traditional shortest path or minimum cost path. We analyzed the problem under the conditions that travel time is changing, and proposed an algorithm to solve them. Extending our models for visiting two or more destinations is one of the further research topics.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.141-145
• /
• 2010

Most of the industrial loads includes the non-linear load as well as the linear load because there are many kinds of power conversion equipments at the input stage of the load in distribution network. The non-linear load causes the distortion of voltage waveform at PCC because the non-linear load generates the harmonic current. As a result, various voltage harmonics are existed at PCC depending on the current harmonics from the non-linear load. And, a series reactor is generally connected to the power capacitor in series to attenuate the distortion of voltage waveform and to reduce an inrush current of power capacitor. Also, harmonic current of power capacitor is highly dependent on the series reactor because it is operated with the power capacitor as a passive filter against nonlinear loads. Then, these capacitors might be damaged by the excessive voltage and current harmonic components. In this paper, we presented how to select the capacitor and series reactor to meet the requirement of the voltage distortion at PCC and analyzed the voltage, current and capacity rating of the power capacitor by the computer simulation to ensure the safe operation of power capacitor when the voltage harmonics at PCC are existed. Also, the analysis data were compared with the experimental measurements for the verification.

• 대한물리치료과학회지
• /
• 제7권2호
• /
• pp.503-512
• /
• 2000

This study was carried out to find out factors affecting on organizational commitment of hospital physical therapists in Korea. The sample used in this study consisted of 135 physical therapists who were working in hospitals located in Seoul. The data for analysis were collected by questionnaire survey. The major statistical methods used for the analysis were factor analysis and multiple regression analysis. The dependent variable of the study was organizational commitment (responsibility of organization and propensity to stay), and the independent variables were general characteristic of respondents and components of job satisfaction - "task", "organizational operation system", "opportunity of development", "interpersonal relationship" - of hospital physical therapists. Important factors affecting the responsibility of organizational commitment were religion, work period, task satisfaction, opportunity of development. And propensity to stay was significantly affected by religion, work period, and four components of job satisfaction. In considering above findings, for improving factors affecting on organizational commitment of physical therapists, hospitals need to develop strategies for enhancing job satisfaction by providing the adequate job environment.