• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.179.2-179.2
• /
• 2007

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.4
• /
• pp.225-230
• /
• 2004

An electromagnetic actuator has been designed and fabricated for Probe-based data storage applications. The actuator consists of permanent magnets(SmCo) housing and a media Platform which is connected to the Si frame by four couples of Si leaf springs. In order to generate electromagnetic force, Cu coils were electroplated under the media platform. The magnetic field distribution was calculated with 3D Finite Element Method of Maxwell 3D program. The field strength felt by Cu coils was estimated to be about 0.33T when the distance between the media platform and permanent magnets is $200\mu\textrm{m}$. The static and dynamic motions of the actuator were analyzed by FEM method with ANSYS 5.3. The measured displacements of the actuator were about $\pm$$92\mu\textrm{m}$ for input current of $\pm$40㎃ and the resonance frequency was 100Hz. The proposed electromagnetic actuator can be utilized for media driver of probe-based data storage system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.11
• /
• pp.1365-1373
• /
• 1995

In this paper, we address the issues related to storage and retrieval of continuous media (CM)data we face in designing multimedia on-demand (MOD) storage servers. To support the two orthogonal factors of MOD server design, i.e., storage and retrieval of CM data, this paper discusses the techniques of disk layout, disk striping and real-time disk scheduling, which are integrated as a combined solution to the high- performance MOD storage subsystem. The proposed clustered striping technique enables either a multiple-disk or a parallel system to guarantee a continuous retrieval of CM data at the bandwidth required to support user playback rate by avoiding the formation of I/O bottlenecks.

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.97-100
• /
• 2000

As network resources have become faster and demands for multimedia service through network have increased, the demand for Media server system has increased. These kinds of media server solve their bottle neck problem of internal storage device by using parallel system which takes advantage of fast network resource. Many vendors have suggested each of their media server system to solve these problem radically, but most of them require major modification of infra component and additional drawback has added. For example, storage mechanism for specific media requires new file system which is totally different from traditional one, and algorithm for enhancing performance may not suit for traditional operating system environment. In this paper, we designed a parallel media server based on web interface of traditional system and implemented a program for media server. Implemented server system performs parallel processing through web interface without any modification of traditional system, and controls which is related to merging load by distributed data is charged only to client and control server and consequently load of storage server can be minimized. And also, data transfer protocol for streaming media includes Retransfer algorithm and client Admission control policy relevant to performance of whole system.

• Transactions of the Society of Information Storage Systems
• /
• v.8 no.2
• /
• pp.50-55
• /
• 2012

Optical disks are widely used in libraries and archives as digital data media due to their long-term storage stability. Though archive-grade optical disks are already available on the market, there is a relative less focusing on the reliable recording conditions. Commercial BD-R media were recorded at various recording speeds with the maximum speed of 6X, and tested at the acceleration aging conditions. Through the evaluation of long-term storage features by the data stability test, lower recording speed of 2x resulted in better long-term storage stability. In addition, degradation aspects of unstable long-term storage feature at outer region of disk were discussed.

• Smart Media Journal
• /
• v.4 no.3
• /
• pp.62-67
• /
• 2015

The trend keywords in ICT sector will be Big Data, Internet of Things, and Cloud Computing. The rear end to support those techniques requires a large-capacity storage technology of low-cost. Therefore, we proposed the prototype of low-cost and mass distributed storage system based on PC using open-source Ceph FS for SMB.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.13-16
• /
• 2007

The purpose of this paper is real time tilt servo control of the holographic data storage system. Holographic data storage device is a next generation data storage device with high storage density, high transfer rate and short access time. This device is very sensitive to a disturbance due to the enormous storage density. As to the recording material changed disc type, the media continuously vibrates as the disc rotates. When disc rotates, deviation, eccentricity and unbalance disturbance are occurred. This disturbances cause disc tilt, finally reference beam does not illuminates to correct incidence angle. Therefore real time tilt servo control is essential. In this paper, the algorithm is proposed to make real time tilt detection in angle multiplexing of the holographic data storage system with an additional servo beam and the experiments are performed.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.23-27
• /
• 2007

Blu-ray disc 이후의 차세대 고밀도 광 기록 기술로 주목받는 홀로그래픽 데이터 스토리지 시스템을 설계, 제작하고 기록 재생 test 를 수행하였다. 시스템은 각도 다중화법을 채택하였고, 파장 405nm, NA 0.55 신호광 Fourier 변환 렌즈로 미디어에 defocus 하여 기록하였다. 1 page 용량은 raw bit 로 0.74Mbit 이고, SLM 과 CCD 의 over-sampling 비율은 1:1.5 가 되도록 구성하였다. 얻어진 raw 이미지는 위치 및 distortion 보상등의 신호처리 후, 70page 다중화 조건에서 bER $1{\times}10-2$ 수준으로 재생해 낼 수 있었다. 온도 변화에 의한 신호 열화를 보상하기 위해 External Cavity Tunable Blue LD 를 개발하여 온도 변화 $10^{\circ}C$까지 보상 가능함을 확인하였다.

• Broadcasting and Media Magazine
• /
• v.6 no.3
• /
• pp.26-39
• /
• 2001

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.3
• /
• pp.201-207
• /
• 2006

Information storage devices have been studied to increase the storage capacity and the data transfer rate as well as to decrease the access time and their physical sizes. Optical information storage devices have been achieved high-capacity by reducing optical spot size remarkably due to the development of Blue-ray technology. Optical information storage devices usually use 1.2mm-thick polycarbonate(PC) media to get high enough stiffness. However, it would be better if we can decrease the thickness of a disk for achieving thinner device while keeping the capacity as large as possible. Decreasing the thickness of the storage media makes it difficult to read and write data because it increases the transverse vibration of the rotating disk due to the interaction with surrounding air and the vibration characteristics of thin flexible disk itself, Therefore, a special design based on the fluid mechanics is required to suppress the transverse vibration of the disk in non-contact manner so that the optical pickup can read/write data successfully. In this study, a curved wall is proposed as a stabilizer to suppress the transverse vibration of a $95{\mu}m$-thick PC disk. The characteristics of disk vibration due to a curved wall have been studied through numerical and experimental analysis from the fluid mechanics point of view. The proposed shapes are possible candidates as stabilizers to suppress the transverse vibration of a flexible disk which rotates at high speed.