• Journal of Korean Academy of Nursing Administration
• /
• v.19 no.2
• /
• pp.315-327
• /
• 2013

Purpose: The purpose of this study was to investigate the patient safety culture in Korean nursing homes using the Nursing Home Survey Patient Safety Culture (NHS-PC), a valid tool, provided by the Agency for Healthcare Research and Quality (AHRQ) and to compare the results with AHRQ data. Methods: Administrators and staff (N=151) of six nursing homes in Seoul, Busan, Kyeonggi Province and Gyeongsangnam Province completed the survey in July, 2010. The data were analyzed using descriptive statistics, positive response rate, t-test, ANOVA, DUNCAN, Cronbach's ${\alpha}$. Results: The total mean (SD) positive response rate for patient safety culture was not significantly different from the AHRQ data. For composite levels, the results of 'handoffs' were significantly higher, and the results of 'feedback and communication about incidents' and 'nonpunitive responses to mistakes' were significantly lower than the AHRQ data. Conclusion: More effective strategies related to nonpunitive responses to mistakes and management activities for patient safety are needed to improve patient safety culture in nursing homes.

• Atmosphere
• /
• v.29 no.2
• /
• pp.219-226
• /
• 2019

Generally, the weather forecast system has been run using prescribed ocean condition. As it is widely known that coupling between atmosphere and ocean process produces consistent initial condition at all-time scales to improve forecast skill, there are many trials on the application of data assimilation of coupled model. In this study, we implemented a weakly coupled data assimilation (short for WCDA) system in global NWP model with low horizontal resolution for coupled forecast with uncoupled initialization, following WCDA system at the Met Office. The experiment is carried out for a typhoon evolution forecast in 2017. Air-sea exchange process provides SST cooling and gives a substantial impact on tendency of central pressure changes in the decaying phase of the typhoon, except the underestimated central pressure. Coupled data assimilation is a challenging new area, requiring further work, but it would offer the potential for improving air-sea feedback process on NWP timescales and finally contributing forecast accuracy.

• International journal of advanced smart convergence
• /
• v.12 no.2
• /
• pp.47-55
• /
• 2023

The automotive industry is undergoing a paradigm shift due to the convergence of IT and rapid digital transformation. Various components, including embedded structures and systems with complex architectures that incorporate IC semiconductors, are being integrated and modularized. As a result, there has been a significant increase in vehicle defects, raising expectations for the quality of automotive parts. As more and more data is being accumulated, there is an active effort to go beyond traditional reliability analysis methods and apply machine learning models based on the accumulated big data. However, there are still not many cases where machine learning is used in product development to identify factors of defects in performance and durability of products and incorporate feedback into the design to improve product quality. In this paper, we applied a prediction algorithm to the defects of automotive door devices equipped with automatic responsive sensors, which are commonly installed in recent electric and hydrogen vehicles. To do so, we selected test items, built a measurement emulation system for data acquisition, and conducted comparative evaluations by applying different machine learning algorithms to the measured data. The results in terms of R² score were as follows: Ordinary multiple regression 0.96, Ridge regression 0.95, Lasso regression 0.89, Elastic regression 0.91.

• International Journal of High-Rise Buildings
• /
• v.4 no.1
• /
• pp.85-90
• /
• 2015

Advances in the technology of computational design are giving architects and engineers the opportunity to analyze buildings with complex geometries. This study explores the optimization and automation process using the parametric design method, and uses digital tools to achieve surface representation and panelization for curved shaped office buildings. In this paper, we propose parametric algorithms of dimensional and geometric constraints using the Knowledge-ware scripts embedded in Gehry Technologies' Digital Project. The knowledge-based design methods proposed in this study can be used to systemize the knowledge possessed by experts in the form of data. Such knowledge is required to promote collaboration between designers and engineers in the process of CAD/CAE/CAM. The aim of this study is to integrate the process into design, which establishes an integrated process. This integration enables two-way feedback between design and construction data by combining the methods used in designing, engineering, and construction.

• Journal of Welding and Joining
• /
• v.16 no.6
• /
• pp.104-112
• /
• 1998

In the previous study, the countermeasure for welding deformation of bracket tilt is through up through experimental inspection for total process including welding process. For completeness of systematic examination of parts having sensitivity on welding deformation, the comparison and feedback between the result through simulation of welding process and experimental data is needed. In other words, it is necessary to control welding deformation that construct the prediction system for welding deformation through comparison and tuning with experimental data. In the present study, the application of FEA on welding process of bracket tilt with susceptibility to deformation is made and deformation behavior through change of welding sequence is focused on. It is used to improve the exactness of deformation analysis that three dimensional analysis for moving heat source, activated and deactivated bead element, and volume heat flux etc.

• IE interfaces
• /
• v.17 no.3
• /
• pp.249-260
• /
• 2004

The objective of this study is to measure and to predict the efficiency of participating groups of BK 21 by using DEA. DEA is a methodology to measure and to evaluate the relative efficiency of a homogeneous set of decision-making units (DMUs) in a process which uses multiple inputs to produce multiple outputs. In order to reflect the effect of the environmental factors of BK 21, we consider not only a general DEA model but also a logistic model for DEA. As a result, location of participating groups of BK 21 turns out to be significant. Our proposed approach can predict the efficiency of a new BK 21 group with given environmental factors. It is expected that these models can give a feedback for effective management of BK 21.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.346-349
• /
• 1995

In this paperwe develop a real-time simulator for direct drive cooperative robot by using OpenGL in a Windows NT based system. This simulator is composed of 2 parts, a display part and an interface part. In the display part the robot is modelled and rendered in 3D space. To do this OpenGL, a kind of graphic library, is used for rendering and animating robots and kinematics gives the information of the current robot configuration. The control and the feedback data are sent and received via the interface part. In real time simulation interfacing part needs fast data transfer rate and good nosic immunity. In experiment we have simulated 2-link direct drive cooperative robots using the trajectory tracking algorithm proposed in reference.

• Journal of Information Display
• /
• v.5 no.3
• /
• pp.35-40
• /
• 2004

In this study, we collected data used to formulate the relationship between quantitative metrological parameters in CRT display and the perceived focus quality. Human perception of the focusing quality was evaluated in terms of user feedback scores regarding the character legibility from four highly trained inspectors. Thirteen CRT monitors from five different manufacturers were compared relatively with respect to the norm monitor. The profile of electron beam such as spot size and the shape of distribution made by electron beam, contrast, convergence of RGB beams, and luminance characteristics were measured using a precision measurement system. Linear regression analysis and artificial neural network models were used to formulate the relationship between human perception and the quantitative measurements. The accuracy of the formulated linear regression model ($R^2$=0.515) was not satisfactory but the nonlinear neural network model ($R^2$=0.716) was fairly convincing and robust even the utilized data included subjective differences.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.360-362
• /
• 2006

This paper proposes a new track-following control method using disturbance observer with the freedom of gain and frequency adaptation in optical disk drive system. Recent ODDs use smaller track pits, higher rotation speed and broader rotational speed variations to increase the data capacity and data transfer rate. This cause the degradation of track-following performance by increasing the disturbance of the rotary system. In this paper, we discussed on a DOB structure that efficiently attenuate the disturbance without effecting the overall feedback loop characteristics on CLV type ODD which uses a higher and broader range of rotational speed. DOB structure uses two band pass filter. We analyzed the track-following performance sensitivity on rotational frequency variance and gain changes. This analysis is done on a computer simulation environment and actual ODD product.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.59.2-59.2
• /
• 2014

We study the environmental dependences of various quasar properties using the Sloan Digital Sky Survey (SDSS). For an environmental indicator, we construct the galaxy number density field from the latest data (Data Release 12) of Constant MASS (CMASS) galaxies of SDSS in the redshift range 0.46<=z<=0.59. The galaxy number density field is determined by searching the 20 nearest galaxies from each grid point. For quasars, we use the fifth edition of the SDSS Quasar Catalog made by Schneider et al. (2010) and the catalog of properties for the quasars by Shen et al. (2011). We find environmental dependences of quasar properties as a function of the galaxy number density. This will help us to understand the evolution of quasars with their environment, which will be useful to improve modeling Active Galactic Nuclei feedback in cosmological hydrodynamic simulations.