• Korean Journal of Environmental Agriculture
• /
• v.31 no.4
• /
• pp.318-327
• /
• 2012

BACKGROUND: For Non-Point Source(NPS) loads reduction, pollutant loads need to be quantified for major farming methods. The objective of this study was to evaluate impacts of farming methods on NPS pollutant loads from a paddy rice field during the growing season. METHODS AND RESULTS: The height of drainage outlet, amount of fertilizer, irrigation water quality were considered as farming factors for scenarios development. The control was derived from conventional farming methods and four different scenarios were developed based combination of farming factors. A field scale model, CREAMS-PADDY(Chemicals, Runoff, and Erosion from Agricultural Management Systems for PADDY), was used to calculate pollutant nutrient loads. The data collected from an experimental plot located downstream of the Idong reservoir were used for model calibration and validation. The simulation results agreed well with observed values during the calibration and validation periods. The calibrated model was used to evaluate farming scenarios in terms of NPS loads. Pollutant loads for T-N, T-P were reduced by 5~62%, 8~37% with increasing the height of drainage outlet from 100 mm of 100 mm, respectively. When amount of fertilizer was changed from standard to conventional, T-N, T-P pollutant loads were reduced by 0~22%, 0~24%. Irrigation water quality below water criteria IV of reservoir increased T-N of 9~65%, T-P of 9~47% in comparison with conventional. CONCLUSION(S): The results indicated that applying increased the height of drainage after midsummer drainage, standard fertilization level during non-rainy seasons, irrigation water quality below water criteria IV of reservoir were effective farming methods to reduce NPS pollutant loads from paddy in Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.295-300
• /
• 2015

Purpose: The aim of this study was to evaluate the shear bond strength between Ni-Cr alloy and composite resin using universal adhesive systems coMPared to conventional method using metal primers. Materials and methods: For this study, a total of 120 cast commercial Ni-Cr alloy (Vera Bond 2V) disks were embedded in acrylic resin, and their surfaces were smoothed with silicon carbide papers and airborne-particle abrasion. Specimens of each metal were divided into 6 groups based on the combination of metal primers (Metal primer II, Alloy primer, Metal & Zirconia primer, MKZ primer) and universal adhesive systems (Single Bond Universal, All Bond Universal). All specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. Shear bond strength testing was performed with a universal testing machine at a cross head speed of 1 m/min. Data (MPa) were analyzed using one-way ANOVA and the post hoc Tukey's multiple comparison test (${\alpha}$=.05). Results: There were significant differences between Single Bond Universal, All Bond Universal, Metal Primer II and Alloy Primer, MKZ Primer, Metal & Zirconia Primer (P<.001). Conclusion: Universal Adhesive system groups indicated high shear bond strength value bonded to Ni-Cr alloy than that of conventional system groups using primers except Metal Primer II. Within the limitations of this study, improvement of universal adhesive systems which can be applied to all types of restorations is recommended especially non-precious metal alloy. More research is needed to evaluate the effect of silane inclusion or exclusion in universal adhesive systems.

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.4
• /
• pp.277-284
• /
• 2008

Background: In principle, cervical tuberculous lymphadenitis (CTBL) is a medical disease that may require surgical treatment, particularly in young women who complain of psychosocial and cosmetic problems. We encountered 13 cases of aggravated CTBL treated surgically despite the appropriate course of antituberculous chemotherapy. We report the clinical characteristis of these cases. Methods: The clinical data of 13 patients with aggravated CTBL requiring surgical treatment from January 2000 to December 2006 at the Department of Chest Medicine, Internal Medicine and Plastic Surgery, National Medical Center was reviewed retrospectively. Results: Twelve of the 13 cases (92%) were female. The most common age was 21~30 years (69%). Multiple nodes were palpated in 11 cases (85%). The supraclavicular lymph nodes were sites the most commonly involved (54%). The other involved sites in the order of decreasing frequency were the jugular chain, posterior cervical, submandibular and infraauricular lymph nodes. A palpable mass was the most commonsymptom. Neck pain was reported in 3 cases (23%). General symptoms such as weight loss, fatigue, anorexia and night sweats were noted in 5 cases (38%). Respiratory symptoms such as cough, sputum, hemoptysis, dyspnea and chest pain were observed in 4 cases (31%). Pulmonary tuberculosis was noted in 11 cases (85%). Other extrapulmonary tuberculosis coexisted in 4 cases (31%). This suggests that surgical CTBLs may be manifestations of a systemic disease and might be difficult to treat. Most cases (92%) were stages 2 and 3 at the initial diagnostic period but all cases fell into stage 4 and 5 when reassesed before surgery. The average duration of anti-TB chemotherapy before and after surgery was 10.2 and 15.2 months, respectively. The 13 patients were followed up until June. 2008. Among them, 2 cases had newly developed CTBL and the other 11cases showed no recurrence. Conclusion: In principle, CTBL is the medical disease. However, despite the appropriate course of anti-TB chemotherapy, CTBL can progress to a more advanced stages and grow rapidly to a large-sized or fistulous mass with a persistent abscess. Surgical treatment may be inevitable for patients with psychosocial and cosmetic problems caused by these masses, particularly in young women.

• Journal of Aquaculture
• /
• v.19 no.3
• /
• pp.210-215
• /
• 2006

An experiment was conducted to investigate the effects of four water temperatures (10, 15, 20, and $25^{\circ}C$) in combination with three photoperiods (24L:0D, 12L: 12D, and OL:24D) on the oxygen consumption rate of juvenile dark-banded rockfish, Sebastes inermis (mean body weight $20.5{\pm}0.7g$). The oxygen consumption rates of S. inermis were measured in triplicate for 24 hours using a continuous flow-through respirometer. Different combinations of water temperatures and photoperiods resulted in significant differences in the mean oxygen consumption rate of S. inermis (P<0.001). The oxygen consumption increased with increasing water temperatures for all photoperiod treatments (P<0.01). Mean oxygen consumption rates at 10, 15,20 and $25^{\circ}C$ ranged $178.3\sim283.5,\;386.7\sim530.7,\;529.2\sim754.3$ and $590.0\sim785.5mg\;O_2kg^{-1}h^{-1}$, respectively. $Q_{10}$ values ranged $3.17\sim5.51$ between 10 and $15^{\circ}C,\;1.87\sim2.10$ between 15 and $20^{\circ}C$ and $1.08\siml.24$ between 20 and $25^{\circ}C$, respectively. Fish held in continuous darkness (OL:24D) used consistently less okygen than fish exposed to continuous light (P<0.05). The mean oxygen consumption offish in a 12L:12D photoperiod was higher than that offish in 24L:0D and 0L:24D photoperiods under all temperature treatments except $10^{\circ}C$. The oxygen consumption of fish exposed to the 12L:12D photoperiod was significantly higher during the light phase than during the dark phase under all temperature treatments except $10^{\circ}C\;(P<0.05)$. This study provides empirical data for estimating oxygen consumption of S. inermis under given condition. This result has application for culture management and bioenergetic model for growth of this species.

• Korean Journal of Plant Resources
• /
• v.27 no.4
• /
• pp.380-391
• /
• 2014

Plants as well as crops are damaged by a combination of the hot and dry winds that has been a major factor in the reduction of crop production. A means to protect them from damaging conditions is to consider a coating material. In this study, we established laboratory screening methods to find a coating material to protect a crop from rapid transpiration caused by various factors. In a test measuring the weight loss of kidney bean seedlings for 6 days, Avion treatments decreased its weight loss (P=0.05). Owing to long-time spend in completing this assay, we performed a more simple method using a cobalt chloride paper strip, which changes from blue to red colors under water condition. Beewax, guagum, paraffin liquid, soybean oil, and PE-635 gave a waterproofing effect above 37 and 43% at 0.5 and 1 h after treatment, respectively. However, these tested materials did not show significant waterproofing results at 2 h. Although the methods produced reasonable results, a screening method to obtain more objective data is needed. An alternative is to use an instrument that can detect the transpiration of crop leaves. In a preliminary test using barley leaves, a portable photosynthesis system showed transpiration inhibition of 2% soybean oil and 10 times-diluted Avion under field conditions. In another test using the leaves of maize seedlings and apricot tree, 2% liquid paraffin and plant oils such as apricot oil, linseed oil, olive oil, and soybean oil showed significant transpiration inhibition (P=0.05). Especially, paraffin liquid and soybean oil selected from above tests gave good transpiration inhibitory effects against rice at 2%. In addition, the mixture of 2% soybean oil and a spreader showed more elevated inhibition results comparing with soybean oil or the spreader alone indicating that the spreader may be attributed to more uniform diffusion of the hydrophobic material onto the leaf surface of maize seedlings. The hydrophobic material coated physically the stomata and cuticle layers on leaf surfaces of rice. These hydrophobic materials screened in this study are expected to be used as plant coating materials.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.77-87
• /
• 2013

About 1,800 villages have released from Greenbelt since Greenbelt-reform-policy for readjustment of the area was promoted after 1997. Even though the government intended to attract planned development & improvement of these lifted villages through District Unit Plan and designating the lifted area as low-rise and low-density zoning considering the characteristics of the Greenbelt region, there are still many problems to be solved: a lack of funds, insufficient capability for self-improvement and unexecuted SOCs in long-term etc. It seems that these problems are caused by focusing on the lifting areas itself instead of researching deeply the condition and characteristics of the villages and searching proper direction/plans of improvement before lifting Greenbelt In addition, the existing plan of village improvement and management was not considering physical and spacial characteristics of the areas, social and economic situation of residents and relationship between the villages and surrounding cities, though these conditions are different among each villages, and the related regulations are applied uniformly across all the villages and those have been causing many civil appeals and environmental problems. In these respects, this study aims to consider the problems of the lifted villages using the existing researches on them and to make typology by characteristics-data of the villages and to establish improvement strategies of each types. In this study, the villages were classified into 5 types as a result of cluster analysis on 424 villages among all 1,800 through variables of locational potentiality : location, accessibility, size and form of village, condition of regulations etc. According to function of the villages, they were divided into 4 types: urban-type, rural-type, industrial-type and neighborhood-centered-type. This study also drew 4 improvement-strategy-types by combination of locational potentiality and village-function : type of improving life-environment, type of improving production-infra, type of inducing-planned-improvement and type of constructing center-of living-circle. Finally, this study suggested the directions of the each 4 types to desirable improvement and management which could be used to make and complement plans for village improvement.

• Journal of Arbitration Studies
• /
• v.14 no.1
• /
• pp.273-314
• /
• 2004

There is a belief in the construction industry that the traditional court system may not be an ideal forum to effectively and efficiently resolve construction disputes due to the protracted proceedings and the three tier appeal system resulting in a long delay in the final and conclusive settlement of the dispute, relatively high costs involved, the lack of requisite knowledge and experience in the relevant industry, etc. Hence, they assert that certain alternative dispute resolution ('ADR') methods, such as mediation, conciliation, arbitration or a new system for dispute settlement in the form of any combination thereof should be developed and employed for construction disputes so as to resolve them more promptly and efficiently to the satisfaction of all the disputants concerned. This paper discusses certain merits of such assertions and the need for additional considerations for effective resolution of the construction disputes in light of the complexity of the case, importance of expert witnesses, parties' relationship and non-level playing field of the construction industry and so on. At the same time, however, given the inherent nature of disputes rendering the parties involved in an adversarial position, it would rather be difficult, if not practically impossible, to satisfy all the parties concerned in the dispute. Accordingly, in this study, it is also purported to address the demerits of such assertions by studying the situation from a more balanced perspective, in particular, in relation to the operation of such ADRs. In fact, most of such ADRs as stipulated by special acts, such as the Construction Industry Basic Act of Korea, in the form of mediation or conciliation, have failed to get support from the industry, and as a result, such ADRs are seldom used in practice. Tn contrast, the court system has been greatly improved by implementing a new concentrated review system and establishing several tribunals designed to specialize in the review and resolution of specific types of disputes, including the construction disputes. These improvements of the court system have been warmly received by the industry. Arbitration is another forum for settlement of construction disputes, which has grown and is expected to grow as the most effective ADR with the support from the construction industry. In this regard, the Korean Commercial Arbitration Board ('KCAB') has established a set of internal rules end procedures in operation to efficiently handle construction disputes. Considering the foregoing, this paper addresses the most important elements of the arbitration, i.e., arbitration agreement and arbitral award, primarily focusing on the domestic arbitrations before the KCAB. However, since this parer is prepared for presentation at the construction disputes seminar for the public audience, it is not intended for academic purposes, nor does it delve into any specific acadcmic issues. Likewise, although this paper addresses certain controversial issues by way of introduction, it mainly purports to facilitate the understanding of the general public, including the prospective arbitrators on the KCAB roster without the relevant legal education and background, concerning the importance of the integrity of the arbitration agreement and the arbitral award. In sum, what is purported in this study is simply to note that there are still many outstanding issues with mediation, conciliation and arbitration, as a matter of system, institutional operation or otherwise, for further study and consideration so as to enhance them as effective means for settlement of construction disputes, in replacement of or in conjunction with the court proceeding. For this purpose, it is essential for all the relevant parties, including lawyers, engineers, owners, contractors and social activists aiming to protect consumers' and subcontractors' interests, to conduct joint efforts to study the complicated nature of construction works and to develop effective means for examination and handling of the disputes of a technical nature, including the accumulation of the relevant industrial data. Based on the foregoing, the parties may be in a better position to select the appropriate dispute resolution mechanism, a court proceeding or in its stead, an effective ADR, considering the relevant factors of the subject construction works or the contract structure, such as the bargaining position of the parties, their financial status, confidentiality requirements, technical or commercial complexity of the case at hand, urgency for settlements, etc.

• The Journal of Society for e-Business Studies
• /
• v.22 no.2
• /
• pp.137-152
• /
• 2017

The decline in the price of IT devices and the development of the Internet have created a new field called Internet of Things (IoT). IoT, which creates new services by connecting all the objects that are in everyday life to the Internet, is pioneering new forms of business that have not been seen before in combination with Big Data. The prospect of IoT can be said to be unlimited in its utilization. In addition, studies of standardization organizations for smooth connection of these IoT devices are also active. However, there is a part of this study that we overlook. In order to control IoT equipment or acquire information, it is necessary to separately develop interworking issues (IP address, Wi-Fi, Bluetooth, NFC, etc.) and related application software or apps. In order to solve these problems, existing research methods have been conducted on augmented reality using GPS or markers. However, there is a disadvantage in that a separate marker is required and the marker is recognized only in the vicinity. In addition, in the case of a study using a GPS address using a 2D-based camera, it was difficult to implement an active interface because the distance to the target device could not be recognized. In this study, we use 3D Depth recognition camera to be installed on smartphone and calculate the space coordinates automatically by linking the distance measurement and the sensor information of the mobile phone without a separate marker. Coordination inquiry finds equipment of IoT and enables information acquisition and control of corresponding IoT equipment. Therefore, from the user's point of view, it is possible to reduce the burden on the problem of interworking of the IoT equipment and the installation of the app. Furthermore, if this technology is used in the field of public services and smart glasses, it will reduce duplication of investment in software development and increase in public services.

• Journal of Oral Medicine and Pain
• /
• v.34 no.4
• /
• pp.341-351
• /
• 2009

There is tremendous variability in the ways patients present with taste problems. Because of complex and multifactorial etiological background, it is not simple to evaluate patients with taste disorders. Accurate assessment of patients' status by prudent, thorough history taking and symptom analysis is the most essential for exact diagnosis of taste disorders. The aim of this study was to investigate the clinical characteristics of patients with taste problems as a primary complaint. Consecutive series of 50 patients (12 males and 38 females, mean age $53.6\;{\pm}\;14.7$ years) were included for the present study. All subjects were requested to complete a comprehensive questionnaire. Clinical evaluation procedures included oral examination, interview, questionnaire analysis, panoramic radiography, blood test and measurement of salivary flow rate. The obtained results were as follows: 1. Among the patients, 36 patients (72%) complained of oral mucosal pain or burning sensation. Of these patients, 18 patients (36%) were diagnosed as burning mouth syndrome. 2. Nineteen patients (38%) complained of subjective oral dryness. The flow rate of unstimulated whole saliva was less than 0.1 mL/min in 14 patients (28%) and 17 (34%) had a stimulated whole salivary flow rate of less than 0.5 mL/min. 3. Among the types of taste disorders, hypogeusia, the most frequently reported, was found in 25 patients (50%), dysgeusia in 18 patients (36%), phantogeusia in 15 patients (30%), hypergeusia in 10 patients (20%), and ageusia in 5 patients (10%). Nineteen patients (38%) reported more than one type of taste disorder and the most frequent combination was dysgeusia + hypogeusia (n=6, 12%). 4. Based on data from the medical and dental histories and examinations, the patients were assigned to 12 probable causal categories. Taste disorders due to oral mucosal diseases and idiopathic taste disorder were the most frequent (n=9; 18%, each), followed by psychogenic taste disorder (n=8; 16%), drug-induced taste disorder (n=7; 14%), and taste disorder due to dry mouth (n=6; 12%). These 5 categories of taste disorder accounted for 78% of all cases in this study.

• Advances in pediatric surgery
• /
• v.9 no.1
• /
• pp.45-51
• /
• 2003

A nationwide survey on choledochal cyst was undertaken among 39 members of the Korean Association of Pediatric Surgeons. The members were required to complete a questionnaire and the case registration form for each patient during the five year period of 1997 to 2001. Three hundred and forty eight patients were registered from 32 institutions. The average number of patients per surgeon was one to two every year. The male to female ratio was 1:3.4. The age of patients on diagnosis was $49.0{\pm}44.4$ months. The geographic distribution was 34.8% in Seoul and Kyoungki-do, 33.3% in Kyoungsang-do, 17.9% in Cholla-do, and 8.5% in Choongchung-do, in order of frequency. The three common clinical presentations were abdominal pain (63.8%), vomiting (35.3%), and jaundice (29.1%). Only seven patients (2%) presented with classic triad, and 25 patients were diagnosed by antenatal ultrasonographic examination. According to the Todani Classification, 238 patients (7l.3%) were type 1, 3 (0.9%) type 11, and 93 (27.8%) type IV. At the time of the operation, three important associated conditions were choledocholithiasis in 45 patients (15.1%), liver fibrosis (Grade 1-4) in 35, and previous operative procedure for biliary diseases in 10. Associated anomalies were observed in 13 patients (3.8%). Three hundred thirty nine (98.8%) of 343 lesions were treated by Cyst excision and Roux-Y hepaticoiejunostomy. One hundred seventy-six patients had an anomalous arrangement of the pancreatobiliary ductal system (APBD): APBD was not in 92 patients, biliary duct joined to the pancreatic duct in 51, and pancreatic duct joined to the biliary duct in 26. There were 8.5% early, and 7.7% late phase operative complications. The major complications were bleeding, anastomotic leakage, and acute pancreatitis. The combination of acute abdomen and choledochal cyst may suggest spontaneous rupture. Because of the development of late intrahepatic bile duct stones, long term follow up after cyst excision and hepaticojejunostomy is required. The optimal time of surgical intervention should also be considered in the situation of routine use of antenatal ultrasonographic examination. This is the first review of the choledochal cyst in Korea and provides baseline data for future comparisons.