• Journal of Sensor Science and Technology
• /
• v.20 no.2
• /
• pp.137-144
• /
• 2011

Wireless sensor network(WSN) has the potential to greatly effect many aspects of u-healthcare. By outfitting the potential with WSN, wearable sensor node can collects real-time data on physiological status and transmits through base station to server PC. However, there is a significant gap between WSN and healthcare. WSN has the limited resource about computing capability and data transmission according to bio-sensor sampling rates and channels to apply healthcare system. If a wearable node transmits ECG and accelerometer data of 4 channel sampled at 100 Hz, these data may occur high loss packets for transmitting human activity and ECG to server PC. Therefore current wearable sensor nodes have to solve above mentioned problems to be suited for u-healthcare system. Most WSN based activity and ECG monitoring system have been implemented some algorithms which are applied for signal vector magnitude(SVM) algorithm and ECG noise algorithm in server PC. In this paper, A wearable sensor node using integrated ECG and 3-axial accelerometer based on wireless sensor network is designed and developed. It can form multi-hop network with relay nodes to extend network range in WSN. Our wearable nodes can transmit 1-channel activity data processed activity classification data vector using SVM algorithm to 3-channel accelerometer data. ECG signals are contaminated with high frequency noise such as power line interference and muscle artifact. Our wearable sensor nodes can remove high frequency noise to clear original ECG signal for healthcare monitoring.

• The Journal of the Korea Contents Association
• /
• v.13 no.8
• /
• pp.458-465
• /
• 2013

The purpose of this research is possible to reduce cost of management and maintenance to realization of smartphone and using data server network technology instead of GPS. Former wireless bus information system was focused on supply side management structure and national spread thus it needs to establish GPS terminal, Windows CE, Window XP embedded and LCD panels which provide only one way communication of information of public traffic information. Therefore, former system management and maintenance cost are very expansive. This research is not use GPS terminal and other hardware equipment but design and realization using smartphone and data network server. This system also provides low cost of management and maintenance. It is not only service downtown area but also out of town and small and medium-sized cities. This system functionally gets a satisfying result user convenience and satisfaction using function of set-up route map, real-time display, and running statically analysis.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.457-460
• /
• 2011

For the mobile meteorological services, sensed data should be gathered at a server from various clients like as Ubiquitous Sensor Network, mobile phone or public traffic vehicle by wireless network. The gathered data at server have huge volume and increase continuously. Therefore, a special query method and data structure should be considered. This paper studies on all possible query type on the data and processing steps for the mobile meteorological services. Some query spaces will be discussed. After that, this paper proposes effective data structure for the sensed data to support the query types.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.69-75
• /
• 2002

In this paper, we propose the realtime network traffic monitoring system usin SNMP that can supported network and system operation, management, expansion, and design using network analysis and diagnosis to a network administrator. The proposed system consists of two parts: analysis server for collection and analysis of the network information, and supports real-time monitoring of network traffic, and client system shows user a graphical data that analyzed a returned result from the server. This system implements web-based technology using Java and contributes to enhance the effectiveness of network administrator's management.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.3
• /
• pp.64-71
• /
• 2001

In this paper we propose the network traffic monitoring system that can supported network and system operation, management, expansion, and design using network analysis and diagnosis to a network administrator. The proposed system consists of two parts: analysis server for collection and analysis of the network information. and supports real-time monitoring of network traffic, and client system shows user a graphical data that analyzed a returned result from the server This system implements web-based technology using java and contributes to enhance the effectiveness of network administrator's management.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.18-23
• /
• 2008

This paper describes development of real-time condition monitoring system to observe state of a container crane in a port. To analyze the state of a crane, the strength and the direction of wind are measured with sensors along with the load resulted a crane at the moment. The measured signals are processed by especially developed conditioning board and converted into digital data. Measured data are analyzed to define the state of the crane at an indicator. For transmission of these data to the indicator, we implemented wireless sensor network based on IEEE 802.15.4 MAC(Media Access Control) protocol and Bluetooth network protocol. To extend the networking distance between the indicator and sensor nodes, the shortest path routing algorithm was applied for WSN(Wireless Sensor Network) networks. The indicator sends the state information of the crane to monitoring server through IEEE 802.11 b wireless LAN(Local Area Network). Monitoring server decides whether alarm should be issued or not. The performance of developed WSN and Bluetooth network were evaluated and analyzed in terms of communication delay and throughput.

• Journal of Navigation and Port Research
• /
• v.43 no.5
• /
• pp.289-295
• /
• 2019

In this paper, we implemented a safety navigation mobile application that converged AtoN information and location-based services. When application user uses the smartphone's GPS sensor to transmit the user's vessel location data to the data server, the user receives information of which its providing range is considered, such as stored AtoN data, neighboring vessels information, danger area, and weather information in the server. Providing information is sorted based on the smartphone's direction and inclination and it will be also delivered via wireless network (5G, LTE, 3G, WiFi). Additionally the application is available to implement other functions such as information provision through voice and text alarming service when the user's vessel is either approaching or entering the danger area, and an expanded information provision service that is available in shadow area linking with data-storing methods; other linkable data such as weather and other neighboring vessels will be applied based on the lasted-saved data perceived from the non-shadow area.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.387-393
• /
• 2021

This paper proposes a system to synchronize the time of computers over an unmanned aerial vehicle (UAV) network. With the proposed system, the UAVs can perform missions that require precise relative time. Also, data collected by UAVs can be fused precisely with synchronized time. In the system, to synchronize the time of all computers over the UAV network, two-step synchronization is performed. In the first step, the mission computers of the UAVs are synchronized through the server of the system. After the first step, the mission computers measure time offset between the time of the mission computers and the flight computers. The offset values are delivered to the server. In the second step, virtual time is determined by the server from the collected time offset. The measured offset is compensated by moving the synchronized time of mission computers to the reasonable virtual time. Since only the time of mission computers are controlled, any flight computers that use micro air vehicle link (MAVLink) protocol can be synchronized in the proposed system.

• Journal of the Korea Society for Simulation
• /
• v.14 no.2
• /
• pp.1-13
• /
• 2005

In distributed replicating server model, providing replicated services is able to improve the performance of providing a service and efficiency for several clients. And, the composition of the server selection algorithm is efficiently able to decrease the retrieval time for replicated data. In this paper, we define the system model that selects and connects the replicated server that provides optimal service using server-side downstream measurement and proposes an applicable algorithm.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.394-396
• /
• 2000

Currently, lots of research s going on in the field of the load distribution within HTTP. RR-DNS and SWEB are the most representative load distribution research. But, there are still many problems: unbalancing of load, load increase of web server and cost increase. Also, clients that require lots of data like multimedia happens to increase network load. To solve these, research about client/agent/server architecture is going on. But, the clients must know the agent's address and there are complexity and migration problems for design of such as protocol. This paper proposes TBSMS that is capable of choosing the optimal server considering the service capacity of the server as well as the network load. This paper demonstrates that TBSMS uses the web to solve the problem that client must know the agent's address and uses SNMP to solve the complexity and migration problem.