• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권5호
• /
• pp.414-418
• /
• 2004

A 'minimally complex problem set' for ab initio protein Structure prediction has been proposed. As well as consisting of non-redundant and crystallographically determined high-resolution protein structures, without disulphide bonds, modified residues, unusual connectivities and heteromolecules, it is more importantly a collection of protein structures. with a high probability of being the same in the crystal form as in solution. To our knowledge, this is the first attempt at this kind of dataset. Considering the lattice constraint in crystals, and the possible flexibility in solution of crystallographically determined protein structures, our dataset is thought to be the safest starting points for an ab initio protein structure prediction study.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.867-870
• /
• 2003

본 논문은 멀티미디어 데이터 처리를 위한 효율적인 RISC 프로세서 유닛의 설계를 목표로 Vector 프로세서의 SIMD(Single Instruction Multiple Data) 개념을 바탕으로 고정된 연산기 데이터 비트 수에 비해 상대적으로 작은 비트수의 데이터 연산의 부분 병렬화를 통하여 멀티미디어 데이터 연산의 기본이 되는 곱셈누적(MAC : Multiply and Accumulate) 연산의 성능을 향상 시킨다. 또한 기존의 MMX나 VIS 등과 같은 범용 프로세서들의 부분 병렬화를 위해 전 처리 과정의 필요충분조건인 데이터의 연속성을 위해 서로 다른 길이의 데이터 흑은 비트 수가 작은 멀티미디어의 데이터를 하나의 데이터로 재처리 하는 재정렬 혹은 Packing/Unpacking 과정이 성능 전체적인 성능 저하에 작용하게 되므로 본 논문에서는 기존의 프로세서의 연산기 구조를 재이용하여 병렬 곱셈을 위한 연산기 구조를 구현하고 이를 위한 데이터 정렬 연산 구조를 제안한다.

• Applied Microscopy
• /
• 제27권2호
• /
• pp.111-120
• /
• 1997

Cylinder-like crystals of $Ca^{2+}-ATPase$ provide views parallel to the lamellar plane, from which parameters of lamellar stacking can be directly measured. These parameters were measured using different preparation methods. Assuming that molecular packing is the same, data from lamellar plane could supplement those obtained by tilting large, thin plate-like crystals. However, base on data obtained .by electron microscopy and x-ray powder patterns, the plate-like crystal may have another scheme for stacking the lamellar. The projection map (h, 0, 1) from cylinder-like crystals using cryoelectron microscopy suggest the lamellar spacing can be variable.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.700-705
• /
• 2004

Shell finite elements are widely used for the analysis of thin section objects such as sheet metal parts, automobile bodies and et al. due to their computational efficiency. Since many of input data for finite element analysis are given as solid models or triangulated surface models, one should extract midsurface information from these input data initially and then construct shell meshes on the extracted midsurfaces. In this paper, a method of generating shell elements on midsurfaces directly from input models have been proposed. In order to construct shell meshes, the input models should be triangulated on surfaces first, and then tetrahedral elements are generated by using an advancing front method, and finally mid shell surfaces are obtained from tetrahedral meshes. Some examples are given to demonstrate the efficiency of the proposed method.

• Journal of Information Processing Systems
• /
• 제11권3호
• /
• pp.389-405
• /
• 2015

Most traditional database systems exploit a record-oriented model where the attributes of a record are placed contiguously in a hard disk to achieve high performance writes. However, for read-mostly data warehouse systems, the column-oriented database has become a proper model because of its superior read performance. Today, flash memory is largely recognized as the preferred storage media for high-speed database systems. In this paper, we introduce a column-oriented database model based on flash memory and then propose a new column-aware flash indexing scheme for the high-speed column-oriented data warehouse systems. Our index management scheme, which uses an enhanced $B^+$-Tree, achieves superior search performance by indexing an embedded segment and packing an unused space in internal and leaf nodes. Based on the performance results of two test databases, we concluded that the column-aware flash index management outperforms the traditional scheme in the respect of the mixed operation throughput and its response time.

• 한국의학물리학회지:의학물리
• /
• 제11권2호
• /
• pp.109-116
• /
• 2000

자궁경부암 환자의 방사선 조사시 고려하여야 할 사항 중 한가지는 결정 장기인 방광 및 직장의 부작용이다. 강내 고선량률 근접 치료시 방광과 직장의 흡수선량을 열형광량계 선량측정법을 이용하여 간접적으로 측정하였다 방광 및 직장의 부작용을 줄일 수 있는 방법이 제안되었다. 방사선 치료 후 예후관찰 중인 200명의 자궁경부암 환자의 자기공명 영상에서 자궁경부의 중심축에서 방광 및 직장 그리고 자궁벽의 두께를 측정하였다. 밀봉시킨 열형광량계를 오보이드의 팩킹거즈 위에 놓고 씨물레이션 필름 상에서 오보이드의 중심에서부터의 거리를 측정한 후 실제의 방광과 직장의 흡수선량을 계산하였다. 발표된 연구결과들에서 방광 및 직장의 최대 견딤선량을 계산하였고 고선량률 근접치료 1회당의 허용선량을 토대로 양방향의 팩킹두께를 알아냈다 방광과 직장방향의 최소의 팩킹두께는 각각 0.43 과 0.92 cm 이었다. 이 결과를 마이스버거 다항식을 이용한 계산결과와 비교하였다. 본 연구에서 제시한 방법이 임상에서 고선량률 근접 치료시 방광과 직장 같은 결정장기의 흡수선량을 평가하는 방법으로 사용되기를 바란다.

• 한국가금학회지
• /
• 제12권1호
• /
• pp.45-50
• /
• 1985

본 연구는 우리나라의 계란 유통현황을 조사하기 위하여 서울근교, 대전근교, 광주근교, 부산근교에 소재하고 있는 수집상 8개소, 도배상 16개소, 소매상 12개소 및 슈퍼마켓 6개소를 대상으로 설문서를 작성하여 설문조사하였고 그 결과를 계란의 유통규격 설정을 위한 기초자료를 얻고자 실시하였다. 1. 계란의 중량별 구분은 생산자가 주로 실시하며 이 계란의 유통가격은 유통단계별로 2-3원 차가 있었으며 왕란 및 특란은 가정소비가 많았고 대란은 음식점과 가정집에서 그리고 중란과 소란은 음식점에서 주로 소비하고 있다. 2. 소비자 측면에서 볼 때 갈색란을 개당 1.5원씩 더 주고 구입하는 경향이 있었고 중량별 구분은 대체로 믿고 있었다. 3. 소비자의 계란 1회구입량은 30개 주였으며 포장할 경우 10개 단위의 포장을 희망하고 있으며 10개의 포장비용은 10-20원이었고 포장판매를 원하고 있는 비율이 55-64% 정도나 되었다. 4. 유통상인이 구입한 계란은 7일이내에 대부분 판매하고 있으며 계란이 가장 많이 판매되는 계절은 가을이며 G. P센타가 필요하다고 생각하는 비율이 36.4%나 되었다.

• 한국결정학회지
• /
• 제11권1호
• /
• pp.22-27
• /
• 2000

The structure of cis-(malonato)[(4R,5R)-4,5-bis(aminomethyl)-2-isopropyl-1,3-dioxolane]platinum(II) with a potent anticancer activity has been determined by the X-ray crystallographic method. Crystal data are as follows: Pt(C/sub 11/H/sub 20/N₂O/sub 6/), M/sub 4/=471.38, monoclinic, P2₁, a=7.112(1), b=33.615(3), c=7.135(1)Å, β=116.80(1)°, V=1522.6(3)Å, and Z=4. The two independent molecules with very similar structures are approximately related by pseudo two-fold screw axis symmetry, which makes the monolinic cell look like the orthorhombic cell with one molecule in the asymmetric unit and space group C222₁. The crystal packing mode is similar to that of the analogue with the dimethyl substituents instead of the isopropyl group. The Pt atom is coordinate to two O and two N atoms in a square planar structure. The six-membered chelate ring in the leaving ligand assumes a conformation intermediate between the half chair and the boat forms. The seven-membered ring in the carrier ligand assumes a twist-chair conformation and the oxolane ring assumes an envelope conformation. Crystal packing consists of the extensive hydrogen-bonding network in the two-dimensional molecular layers and weak van der Waals interactions between these layers.

• Carbon letters
• /
• 제2권2호
• /
• pp.113-119
• /
• 2001

The advanced method for $CO_2$capture is currently one of the most important environmental issues in worldwide and it is therefore necessary to have available technologies, which minimize the discharge of $CO_2$ including Carbon-14 from nuclear facilities into the atmosphere. A key aspect of this work is to provide the technically principal data required to improve a $CO_2$ removal system for the utilization of regenerative sorbent use, specifically include suggestions regarding its modified column design (parallel dual-bed assembly), stop-restart operation and the economic feasibility of sorbent use. The removal performance of soda lime and the effects of relative humidity (RH) and packing bed-depth (BD) on $CO_2$ removal were investigated. In a single-bed, it revealed that the utilization of soda lime for $CO_2$ removal at line velocity of 13 cm/sec and bed depth of 12 cm increased with the increased relative humidity up to 85%. However, in the parallel dual-bed assembly applied with the stop-restart operation, a maximum utilization rate of soda lime for $CO_2$ removal was obtained even at 55% of RH and 8 cm of BD, specifically the utilization rate of soda lime by using this $CO_2$ removal assembly was about two-fold superior to that in a single-bed.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.478-486
• /
• 2005

Statement of problem : Fracture and dimensional change of an acrylic resin denture are a rather common occurrence. Purpose : The purpose of this study was to compare differences in dimensional changes and flexural strength of separate maxillary complete dentures after immediate deflasking by injection molding and conventional compression processing. Material and method: To evaluate dimensional stability, the maxillary dentures were fabricated by using different materials and methods. Lucitone 199(Dentsply Trubyte. york, pennsylvania, USA) and Vertex(Dentimex, zeist, Netherlands) were used as materials. Compression and injection packing methods were used as processing methods. The impression surface of the dentures was measured by 3D Scann-ing System(PERCEPTRON USA) and overlapped original impression surface of the master cast. To evaluate flexural strength, resin specimens were made according to the different materials, powder/liquid ratio and processing methods. Flexural strength of the complete resin specimens (64mm$\times$10mm$\times$3.3mm) were measured by INSTRON 4467. (INSTRON, England) The data was analyzed by ANOVA, t-test and Tukey test. (p<.05 level of significance) Result: The results were as follows 1. There was no significant differences between master model and denture base for each group in overall dimensional changes. 2. Palatal area was more stable than flange or alveolar area in dimensional stability. but. there was no significant differences among each area. 3. Materials and power/liquid ratio had an effect on flexural strength. (P<.05) Especially materials was most effective. (P<.05) 4. Lucitone 199(powder/liquid ratio followed by manufacturer's direction) showed higher flexural strength than Vertex. Conclusion : Dimensional stability or flexural strength are affected by materials rather than packing techniques.