• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.605-611
• /
• 1998

A computer experimental model for analyzing the microstructures and properties of vibratory deposited power compacts was developed. The effects of some significant variables such as amplitude, frequency, cycle, etc. on the change of diffraction patterns and packing densities of the deposited powder compacts were examined. In addition, the condition of phase transition from non-crystalline phase to crystalline one was determined. Data obtained from the present method quite well fitted the empirical correlations for real experimental data. In conclusion, the present model is so useful to investigate the densification and ordering of vibratory compaction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.53-58
• /
• 2014

As the amount of data between ECUs has increased, the FlexRay consortium proposed FlexRay network system which has larger bandwidth than CAN. But because of implementation cost, CAN and FlexRay hybrid network with FlexRay-CAN gateway will make up the largest part of in-vehicle networks for the present. In this paper, a FlexRay-CAN gateway for a real time feedback control system is implemented, and a data packing algorithm is presented. Finally, a real control experiment with multi-motor system is conducted to verify the proposed gateway system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.35-43
• /
• 2004

An AAL2 transmission scheme is used to deliver voice and data traffic between Node-B and RNC on 3G WCDMA network. To predict performance of AAL2 multiplexing precisely, we derived analytically bandwidth gain and cell packing density using discrete-time Markov chain model for voice service and validated these results with simulation. We also performed detailed simulation for AAL2 multiplexing in a concentrator. Based on the analytical result, we propose the engineering guideline to select the optimal Timer_CU in a Node-B. We found that there is no major benefit of additional AAL2 multiplexing in a concentrator and the benefit of AAL2 switching in tub for data services is much less than that for voice service.

• Journal of Distribution Science
• /
• v.10 no.9
• /
• pp.13-21
• /
• 2012

Purpose - Korean traditional markets are falling behind the times, because they have not met the demands of social changes including: an overall improvement in standards of living, shift in purchasing form and propagation of cars. It is one of the most indigenous and conventional foods of Korea, taking a seat far in the corner of Korean traditional culture. Research design / data / methodology - Korean traditional rice cakes however have their limits. They are produced and sold by independent shop owners who cannot compete with the brand power of franchise organizations. The leadership of adminstration is needed for these shop owners particularly in visual merchandising related to interior design and display. Results - Additionally, the advent of major company-run rice cake cafe adds fresh fuel to the problem in addition to small but luxurious packaging. Small business owners need packaging technology for overall quality improvement of sales of rice cakes. Additional help is needed with the mode of packing to promote sales and win consumer confidence. Conclusions - Further assistance with marketing for seasonal displays is needed as well as teaching business owners how to read graphic data. Regular specialized education for visual merchandising of rice cakes could help independent market owners win the competition against franchise-based organizations.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.2
• /
• pp.3410-3419
• /
• 1974

The purpose of this study is to find out the correlation between pumping rates and influential factors in the tube wells for irrigation through the analysis of various statistical data of the existing tube wells for irrigation and pumping tests. Statistical data of the existing tube wells for irrigation were collected from the authorities concerned, and pumping tests were carried out for twelve tube wells. The results of this study are summarized as follows: 1. The drilled tube wells are the most useful among various tube wells in securing pumping rates. 2. The enlargement of well diameter or the improvement of pumping equipments is necessary in drilled tube wells with pumping rates more than 806 ㎥/day, and the adjustment of foot valves or the special control of pumping equipments is necessary in tube wells with pumping rates less than 300 ㎥/day. 3. The choking of aquifer and slits can be prevented by removing earth and sand piled in tube wells. 4. The increase of well loss and the destruction of aquifer can be prevented by determining the optimum pumping rates through the step draw down tests. 5. The thickness of gravel packing is rather thin in drilled tube tube wells. 6. High pamping rates can be gained by deepening the depth of tube wells in the place the ground water storage is abundant, the thickness of aquifer is thick. and the depth of tube wells is deep. 7. Higher pumping rates can be obtained by constructing tube wells in the place where the drawdown is little and the coefficient of transmissibility is large.

• Culinary science and hospitality research
• /
• v.14 no.2
• /
• pp.115-127
• /
• 2008

The purpose of this study is to validate the evaluation of stock, which has relation with self-esteem and career for the development of commercial stock. This study conducted a survey of purchasing attitudes & receptiveness in order to hold an accurate course for developing stock. According to the analysis, the results are as follows. It examined the cuisiniers of deluxe hotels who mainly use stock of Seoul and the capital region. A total of 350 samples were distributed and 289 samples were selected for the research. Statistical analysis of collected data executed frequency, percentage, average, reliability analysis, factor analysis using SPSSWIN 12.0 PC package programs. Making stock, cooking skills, cooking methods, quality of food ingredients and cooking recipes are important. Also, sensory characteristics such as color, odor, and taste should be considered. Career and self-esteem act on the purchase accommodation attitude of commercial stock. Commercial stock products more than 1,000 mL or 2,000 mL of liquid styles need packing of vacuum pack(vinyl). Based on the result of this study, we will make efficient use of research data for the development of commercial stock products and we will be able to improve conservation of taste with good quality by making by hand through standardization and mass production of traditional culinary skills.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.942-946
• /
• 2009

A scan order converter has to be placed before the JPEG encoder to provide $8{\times}8$ blocks from the pixels in raster scan order. Recently a hardware architecture has been proposed to implement a scan converter based on the single line memory. Since both read and write accesses happen at each cycle, however, the largest part of the entire power budget is occupied by the SRAM itself. In this paper, the data packing and unpacking procedure is inserted in the processing chain, such that the access frequency to the SRAM is reduced to 1/8 by adopting a packed larger data unit. The simulation results show that the resultant power consumption is reduced down to 16% for the SXGA resolution.

• Structural Engineering and Mechanics
• /
• v.76 no.5
• /
• pp.653-661
• /
• 2020

The paper presents a study regarding rubber compressibility behavior. The objective is to analyze the effect of compression degree of rubber on its mechanical properties and propose a new methodology based on reverse engineering to predict compressibility degree based on uniaxial stretching test and Finite Element Analysis (FEA). In general, rubbers are considered to be almost incompressible and Poisson's ratio is close to 0.5. Since this property is intimately related to the rubber packing density, little changes in Poisson's ratio can lead to significant changes regarding mechanical behavior. The deviatory hyperelastic constants were obtained through experimental data fitting by least squares method for the most relevant constitutive models implemented in commercial software Abaqus, such as: Neo-Hooke, Mooney-Rivlin, Ogden, Yeoh and Arruda-Boyce, whereas the hydrostatic part was determined through an optimization algorithm implemented in the Abaqus environment by Python scripting. The simulation results presented great influence of the Poisson's ratio in the rubber specimen mechanical behavior mainly for high strain levels. A conventional pure volumetric compression test was also carried out in order to compare the results obtained by the proposed methodology.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.4
• /
• pp.310-317
• /
• 2008

The objective of the survey is to define and judge exposure profiles semi-qualitative data in high risk processes using styrene. The survey was conducted on 98 factories out of 229 factories based on data from periodic working environment monitoring for styrene. Styrene is widely utilized as a raw material for PS and co-polymers such as ABS, SAN, SBR, SBL, unsaturated polyester resins(UPR) and others. An approximate breakdown of styrene's markets in Korea is PS 30%, expandable PS 17%, ABS 33%, SAN 5%, SBL 4%, SBR 3%, UPR 1% and other 7%. Although UPR accounts for 1% of total amount of styrene, workers dealing with it are exposed to very high concentrations up to 64 ppm. Especially styrene is widely used in the laminating process of fiberglass reinforced plastics(FRP) manufacturing industry. The Applications using styrene are largely classified into two sections which are applied to styrene monomer(SM) and UPR. SM is utilized for a raw material of resins, surfactant and adhesive. UPR is employed for FRP and non-FRP. For SM control targets are mixing colors and packing in the gelcoat resins manufacturing industry(MI), for UPR control targets out of works using UPR are 1) laminating in the MI of plastics, automobile parts and boats, 2) mixing and packing in the SMC/BMC MI, 3) molding and cutting in the other specific plastics MI, 4) mixing and coating in artificial marble product MI, 5) dipping in the electric motors & transformers MI, 6) molding in the button MI, 7) painting in the musical instrument MI. Findings from the study have given the information for the high risk processes and working practices so that occupational health professionals could focus on targeted workplaces to prevent occupational diseases. It is also useful to develop a control strategies and specific controls for high risk processes and facilities using styrene.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.277-282
• /
• 1997

The complex refractive index of Diamond-like Carbon (DLC) thin films, which can be applied to optical devices or electrical devices, have been determined using optical methods. DLC thin films are grown on Si(100) substrates and vitreous silica substrates respectively, using the technique of plasma enhanced chemical vapor deposition (PECVD). The spectroscopic ellipsometry data($\psi$, $\Delta$) and the transmission spectra of these DLC films are obtained. These optical spectra are analyzed with the help of the Sellmeier dipersion relation and a quantum mechanically derived dispersion relation. Using spectroscopic ellipsometry data at their transparent region, the refractive index and the effective thickness of DLC films on vitreous silica are model calculated, Then the transmission spectra are inverted to yield the extinction coefficient spectra k(λ) at absorbing region. These spectra are fit to the quantum mechanical dispersion relation and the best fit dispersion constants are determined. The complex refractive indices are easily calculated with these constants. The spectroscopic ellipsometry data at the absorbing region in model calculated to give the packing densities and the degrees of surface microroughness of DLC films. Discussions are made in correlation with the growth condition of DLC films.