• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.38-44
• /
• 1998

This paper presents an integrated fault diagnosis expert system to assist SCADA operators in local control centers which controls unmanned distribution substations in a power system. The proposed system diagnoses various faults occurred in both substation devices and transmission devices. The system can be easily installed without disturbing main SCADA system. The system simply shares the dynamic information including alarms with main SCADA using dual data link interface. And the proposed expert system utilizes the fuzzy reasoning process in order to consider the uncertainty factor. The system is developed using a low cost personal computer owing to the special modular programming and the meta-inf!'lrence structure. Case studies showed a promising possibility.bility.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1285-1288
• /
• 2002

Bluetooth wireless technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range and point-to- multipoint voice and data transfer. It operates in the 2.4GHz ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module we have developed. This module was developed based on IP reuse. So Interface of each module such as link controller UART, and audio CODEC is designed based on ARM7 comfortable processor. We also considered various interfaces of related external chips. The fully synthesizable baseband module was fabricated in a $0.25{\mu}m$ CMOS technology occupying $2.79{\times}2.8mm^2$ area including the ARM TDMI processor. And a FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.6
• /
• pp.99-107
• /
• 2019

With the development of various types of military Unmanned Aircraft(UA)s, the need for interworking and integration between different platforms gradually increased. In order to ensure interoperability at each military UA System(UAS) level, North Atlantic Treaty Organization(NATO) has established STANAG-4586 "Standard Interfaces of Unmanned Aircraft(UA) Control Systems(UCS) for NATO UA Interoperability-Interface Control Document". This paper looks at the basic design structure of STANAG-4586 and the changes on Edition 4 to enhance joint operational capability through reflecting and updating the interoperability design of the military UAS. In particular, we analyze the enhanced Datalink Transition/Handover Procedure and Autonomous functions, one of the biggest features added to the edition. Through this, we propose a modification of UA data link exclusive control using UA Bypass structure, which was impossible in the one-to-one communication structure between existing UA and Core UCS(CUCS). We also suggest ways to improve UA operational reliability by applying Autonomous Functions that directly decides how to deal with emergency situations, rather than by a remote operator over CUCS.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.1
• /
• pp.70-79
• /
• 2024

This paper describes the results of the development of the the unmanned aerial vehicle system integration laboratory(UAV SIL) for the integrated verification. This UAV SIL is designed to test the robustness of the UAV system including the operational logics and the flight control system behaviors under many abnormal and emergency conditions such as data-link losses, airborne subsystem failures, engine shut down conditions, and ground control station faults. This paper presents how to build the UAV SIL and how to verify the in-development UAV system through the UAV SIL.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.67-73
• /
• 2018

There are many types of power facilities such as transformers, switches, and energy storage devices in the micro grid environment. However, with the development of IoT technology, opportunities to acquire sensor information such as temperature, pressure, and humidity are provided. In the existing micro grid environment, the communication protocols such as MMS transport protocol in IEC 61850 standard is applied in accordance with the integrated operation between the power facilities and the platform. Therefore, to accommodate IoT data, a gateway technology that can link IoT data to a data collection device (FEP) based on IEC 61850 is required. In this paper, we propose IEC 61850 based IoT gateway platform prototype for microgrid operating system linkage. The gateway platform consists of an IoT protocol interface module (MQTT, CoAP, AMQP) and database, IEC 61850 server. For databases, We used open source based NoSQL databases, Hbase and MongoDB, to store JSON data. We verified the interoperability between the IoT protocol and the IEC 61850 protocol using Sisco's MMS EASY Lite.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.10
• /
• pp.43-51
• /
• 2014

Recently, National Emergency Management Agency constructs integrated information system for preventing national earthquake based on underground information. In the past, there are numerous difficulties in construction and management of underground information, because underground information is constructed by each management agency. But a link and application of underground information are available because of government 3.0. This study shows the integrated information system for preventing national earthquake based on real-time link of underground information. The integrated information system for preventing national earthquake developed in this study consists of boring information input modules, underground information search/analysis modules based on V-world tile map, user authority management modules, user management modules and real-time liaison interface modules. Also, this study proposes enhancement plan to construct integrated information system for preventing national earthquake stably and strongly. Stability test conduct on stability of data storage, system stability and consistency of processing speed test results show stability of the integrated information system for preventing national earthquake is high.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.7
• /
• pp.1-8
• /
• 2020

In this paper, we present an implementation of high speed image data transfer using XDMA for a video signal generation / acquisition device developed as a military test equipment. The technology proposed in this study obtains efficiency by replacing the method of copying data using the system buffer in the kernel area with the transmission and reception through the DMA engine in the FPGA. For this study, the device was developed as a PXIe platform in consideration of life cycle, and performance was maximized by using a low-cost FPGA considering mass productivity. The video I/O board implemented in this paper was tested by changing the AXI interface clock frequency and link speed through the existing memory copy method. In addition, the board was constructed using the DMA engine of the FPGA, and as a result, it was confirmed that the transfer speed was increased from 5~8Hz to 140Hz. The proposed method will contribute to strengthening defense capability by reducing the cost of device development using the PXIe platform and increasing the technology level.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.496-503
• /
• 2022

In the reality that the fishing population is decreasing and the single-man fishing vessels is increasing, mandatory equipment for navigation and radio equipments for the safety of fishing boats has continued to be added. Therefore, many equipment such as navigation, communication and fishing are installed in the narrow steering room, so it is very confusing and a number of monitors are placed in the front, which is a factor that degrades the function of maritime observation. To solve this problem, we studied an interface that integrates and operates to major radio facilities such as very high frequency-digital selective calling equipment (VHF-DSC), automatic identification system (AIS) and fishing boat location transmission device (V-pass) into one multi function display (MFD) based on LAN. In addition, IEC61162-450 UDP packets and IEC61162 sentence were applied to exchange data through link between MFD and radio equipments, and additional messages needed for each equipment and function were defined. The integrated MFD monitor is easily operated by the menu method, and the performance of the interface was evaluated by checking the distress and emergency communication functions related to maritime safety and the message transmission status by equipment.

• Journal of Distribution Research
• /
• v.11 no.3
• /
• pp.23-53
• /
• 2006

Brands are important in the consumer market. They are the interface between consumers and the company. And consumers may develop loyalty to brands. Also, the late development of industrial marketing explains the near absence of research on brand equity in business to business. With recent change, Industrial companies have shifted from a production focus to a customer focus. Industrial brand is fast developing. The basic purpose of this study is to investigate industrial brand trust and loyalty affecting the result of business relationship between industrial buyers and suppliers. Factors hypothesized to influence trust in a brand include a number of brand characteristics, company characteristics and consumer-brand characteristics. This research presented a comprehensive constructive model consisting of components of industrial brand trust and loyalty, and then propose the research model base on prior researches and studies about relationships among components of industrial brand loyalty Data were gathered from respondents who work in industrial buying center. For this study, Data were analyzed by AMOS 4.0. The results of this research analysis were as fallow. Industrial brand trust and loyalty were positively related with a number of industrial brand characteristics, supplier characteristics and buyer-brand characteristics, relationship commitment. This research newly proposed the concept of industrial brand trust and loyalty affecting the result of business relationship between industrial buyers and suppliers.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.3
• /
• pp.81-90
• /
• 1999

The functional change of university forest have led to need more complicated techniques for forest management strategies, and more information about forest and natural environment. Therefore the systematic tools, like the so-called Forest Information System to which apply the techniques of geographic information system, are eagerly required for collecting, editing, managing, analyzing the various data about forest and environment, and for supporting the decision-making process. The digital mapping, which could be a primary step to construct the Forest Information System, was carried out using the many kinds of thematic spatial data referring to the Seongju Experimental Forest of Taegu University. As a result, various digital maps including forest type, soil type and so on were constructed. And then we made an user-interface system to link the attributive data in management plan to the thematic spatial data. This system was regarded as the effective tool capable of the more rapid query, analysis and update of related data for systematic management of university forest. Moreover, it would be a useful tool of decision-making in devising, assessing and operating the plan of forest management and development. But there would be much room for supplementation and improvement to make the more convenient and powerful system for the external demands, therefore more concerns and efforts in collecting, revising and updating the data is continuously required.