• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.75-83
• /
• 2003

Diode laser absorption system is advantageous of their non-invasive nature, fast response time, high sensitivity and real-time measurement capability. Furthermore, recent advances in room-temperature, near-IR and visible diode laser sources for telecommunication, optical data storage applications are enabling combustion diagnostics system based on diode laser absorption spectroscopy. So, combined with fiber-optics and high sensitive detection strategies, compact and portable sensor system are now appearing for a variety of applications. The objective of this research is to take advantage of distributed feed-back diode laser and develope new gas sensing system. It experimentally found out that the wavelength, power characteristics as a function of injection current and temperature. In addition to direct absorption and wavelength modulation spectroscopy have been demonstrated in these experiments and have a bright prospect to this diode laser system.

• 한국태양에너지학회 논문집
• /
• 제36권5호
• /
• pp.63-71
• /
• 2016

Installed PV module in field is affected by shading caused by various field environmental factors. Bypass diodes are installed in PV module for preventing a power loss and degradation of PV module by shading. But, Bypass diode is easily damaged by surge voltage and has often initial a defect. This paper propose the electric characteristic variation and the power prediction of PV module with damaged bypass diode. Firstly, the resistance for normal bypass diode and damaged bypass diode of resistance was measured by changing the current. When the current increases, the resistance of normal bypass diode is almost constant but the resistance of damaged bypass diode increases. Next, To estimate power of PV module by damaged bypass diode, the equation for the current is derived using solar cell equivalent circuit. Finally, the derived equation was simulated by using MatLab tools, was verified by comparing experimental data.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.67-76
• /
• 2004

Diode laser absorption sensors are advantageous because they may provide fast, sensitive, absolute, and selective measurements of species concentration. These systems are very attractive for practical applications owing to its compactness, reasonable cost, robustness, and ease of use. In addition, diode lasers we fiber-optic compatible and thus enable simultaneous measurements of multiple species along a line-of-sight. Recent advances of room-temperature, near-IR and visible diode laser sources for telecommunication, optical data storage applications make it possible to be applied for combustion diagnostics based on diode laser absorption spectroscopy. Therefore, combined with fiber-optics and high sensitive detection strategies, compact and portable sensor systems are now appearing for variety of applications. The objectives of this research are to develop new gas sensing system and to verify feasibility of this system. Wavelength modulation spectroscopy has been demonstrated in these experiments and has a bright prospect to this diode laser system.

• 대한전자공학회논문지
• /
• 제17권5호
• /
• pp.1-7
• /
• 1980

본 논문에서는 스트라입구조형 DH Laser Diode에서의 lateral guiding에 대한 이론적 해석이 시도되었다. 해석과정에서 활성층내의 반송자밀도를 스트라입폭함수로 모멜링하고 섭동이론(Perturbation Theory)을 사용하여 새로이 전개된 모드이론으로부터 빔폭변화를 계산하여 Hakki의 이론치 및 Kirkby의 실험치와 비교분석을 하였다.

• 한국연소학회지
• /
• 제9권3호
• /
• pp.27-35
• /
• 2004

Diode laser absorption sensors are advantageous because they may provide fast, sensitive, absolute, and selective measurements of species concentration. These systems are very attractive for practical applications owing to its compactness, resonable cost, robustness, and ease of use. In addition, diode lasers are fiber-optic compatible and thus enable simultaneous measurements of multiple species along a line-of-sight. Recent advances of room-temperature, near-IR and visible diode laser sources for telecommunication, optical data storage applications make it possible to be applied for combustion diagnostics based on diode laser absorption spectroscopy. Therefore, combined with fiber-optics and high sensitive detection strategies, compact and portable sensor systems are now appearing for variety of applications. The objectives of this research are to develope a new gas sensing system and to verify feasibility of this system. Wavelength and power characteristics as a function of injection current and temperature are experimentally found out. Direct absorption spectroscopy has been demonstrated in these experiments and has a bright prospect to this diode laser system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2528-2530
• /
• 2000

In general, Diode makes a major role in electronic circuit. For example, switching of rectifier, cross current of switching rectifier, energy transfer of electronic element and reverse charge of capacitor, voltage insulation, energy feedback from load to power supply, and such as recovery of storaged energy. Generally, We regard power diode as ideal element, but it has a certain boundary actually, specially, We use diode for detecting circuit peak hold voltage signal. It has cut in voltage. It occurs error of measurement value namely. This error, below in region diode voltage drop (0.7v) measurement value is wholesome signal, Specially, We can not get precision data. Therefore, precision level is low between theoretical and measurement data because of error in actual circuit. Conclusionally, In this paper, We define the error concerning to the power diode characteristics which is used detecting of the minute signal, and recommend the method that minimize measurement error.

• 정보보호학회논문지
• /
• 제26권6호
• /
• pp.1571-1582
• /
• 2016

단방향 전송 기술에서 해결해야 할 이슈들 중에 한 가지는 TCP 기반의 데이터 전송에서 발생하는 패킷 손실을 줄이는 것이다. 잘 알려진 에러 수정 기법들을 활용해서 패킷 손실을 줄일 수 있다. 하지만, 기존의 여러 기법들을 활용한다고 하더라도, 링크 에러와 버퍼 오버플로우에 의한 패킷 손실은 여전히 발생할 수 있다. 본 논문에서는 신뢰성 있는 단방향 데이터 전송 시스템(RED, REliable Data diode)을 제안한다. RED는 기존의 단방향 전송 기술과 마찬가지로 TCP 기반의 데이터 전송을 지원하기 위해 TCP 프록시 기법을 활용한다. RED 송신시스템은 TCP 패킷의 지연 전송을 활용하여 버퍼 오버플로우에 의한 패킷 손실을 줄일수 있다. 또한, RED 송신시스템은 패킷의 중요도 및 여유 자원을 고려하여, RED 수신시스템에게 다수의 동일한 패킷을 복제 및 전송함으로써, 단방향 전송 링크에서의 링크 에러에 의한 패킷 손실을 줄일 수 있다.

• 한국전자파학회논문지
• /
• 제14권2호
• /
• pp.127-132
• /
• 2003

본 연구에서는 전압제어형 PIN 다이오드 감쇄기에 사용될 수 있는 새로운 PIN 다이오드 모델을 제안하였다. 종래의 PIN 다이오드 모델의 문제점인 DC해석과 전압/감쇄 특성의 오류의 원인을 분석하였고 분석된 결과를 바탕으로 종래 모델의 문제점을 해결할 수 있는 새로운 PIN 다이오드 모델을 제시하였다. 제시된 모델은 간단한 구성으로 상용 시뮬레이터에 쉽게 삽입되어질 수 장점이 있다. 모델의 유용성을 검증하기 위하여 전압제어형 감쇄기를 설계하여 DC특성과 입력전압에 따른 감쇄특성을 실험한 결과 제시된 모델이 종래 모델이 갖는 문제점을 해결할 수 있을 뿐만 아니라 전압제어형 감쇄기를 정확하게 설계할 수 있음을 확인하였다. 본 논문에서 제시된 모델은 PIN 다이오드를 이용한 다양한 초고주파 회로 설계시 적용되어질 수 있을 것으로 사료된다.

• 한국태양에너지학회 논문집
• /
• 제36권4호
• /
• pp.41-47
• /
• 2016

A bypass diode is connected in parallel to solar cells with opposite polarity. The advantage of using the bypass diode is circumvented a destructive efforts of hot-spot heating in the photovoltaic(PV) module. In addition, it is possible to reduce a energy loss under the partial shading on the PV module. This paper presents a characteristic of photovoltaic module under partial shading condition and with defective bypass diode by using the experimental data. The results of field testing for each photovoltaic modules, when photovoltaic system which is connected power grid is operating, the inner junction-box temperature of shading photovoltaic module is high $5^{\circ}C$ because of difference of flowing current through into bypass diode. And incase of not operating photovoltaic system, the inner junction-box temperature of module with defective bypass diode is greatly higher than partial shading PV module.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.3016-3018
• /
• 2005

The PSD(Position Sensitive Detector) is a sensor for detecting the position of incident light. Because of its various advantages, it is used for position and angle sensing, optical range finders, laser displacement sensing, and etc. In the previous study of the position finding system, the laser tracking robot is developed. Small data rate and unidirectionality is the characteristics of data communication both DSP-based pan/tilt control board and the robot. If we can transmit data to the target using PSD sensor and laser diode module, there is no need for communication devices such as the bluetooth and wireless module. For this reason, this paper presents the new method for data transmission. Transmit data using RS-232 is modulated by a VTF(Voltage To Frequency) converter The laser diode module transmits the modulated data. And then the PSD sensor receive that data. Demodulation process is accomplished by the system which is consisted with trans-impedance amplifier, FTV(Frequency To Voltage) converter, and etc.