• 제목/요약/키워드: Data Backup

검색결과 170건 처리시간 0.028초

안드로이드 기반 모바일 정보공유시스템 (Mobile Information Sharing System Based-on Android Mobile Platform)

  • 배성호;김우생
    • 전자공학회논문지CI
    • /
    • 제46권2호
    • /
    • pp.58-64
    • /
    • 2009
  • 기존의 휴대폰에 탑재된 메모기능은 단순히 문자정보만을 기록할 수 있고, 공유할 수 없는 일회성 데이터에 불과했다. 이를 보완하기 위해 본 연구에서는 마인드맵(Mindmap) 표기법을 도입하여 멀티미디어 자료를 포함한 메모의 연계성과 관리효율성을 높이고, 백업서버와 웹서버의 연계로 정보를 공유할 수 있는 시스템을 설계하였다. 그리고 이러한 기능들을 구글의 개방형 모바일 플랫폼인 안드로이드(Android)와 리눅스(Linux) 서버의 연계로 구현하였다.

연구 데이터 관리를 위한 데이터 라이프 사이클 제안 (Data Life Cycle Proposal for Research Data Management)

  • 김주섭;김선태;전예린
    • 한국문헌정보학회지
    • /
    • 제53권4호
    • /
    • pp.309-340
    • /
    • 2019
  • 해외에서는 1990년대부터 데이터의 보존과 큐레이션을 위하여 데이터 라이프 사이클을 개발하였지만, 국내에서는 연구가 상당히 미흡한 실정이다. 본 연구에서는 연구 데이터 관리를 위한 데이터 라이프 사이클을 제안하기 위하여 DCC, ICPSR, IWGDD, DataONE, USGS 그리고 UKDA에서 개발된 데이터 라이프 사이클을 분석하였다. 분석 결과 공통적으로 도출된 구성 요소는 '계획', '생성 및 수집', '프로세스', '보존', '이관 및 폐기', '접근 및 이용', '기술', '보장' 그리고 '백업 및 보안' 등 9개이다. 또한 9개의 구성 요소를 단계별로 세분화하여 해당 단계에서 수행되어야 할 세부 내용을 기술하였다. 향후 국내에서 연구 데이터 관리를 위한 데이터 라이프 사이클을 개발할 때 본 연구의 내용을 적용할 수 있을 것으로 기대한다.

광학 저장 매체상에 LDPC 코드를 이용한 데이터의 분산 기록 방법 (Distributed Data Recording on the Optical Disks using LDPC Codes)

  • 김태웅;류준길;박찬익
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제15권9호
    • /
    • pp.710-714
    • /
    • 2009
  • 광학 저장 매체는 용량이 과거에 비하여 크게 증가하여 현재 블루레이 디스크(Blu-ray Disc)의 경우 25GB 정도의 대용량을 제공하고 있어 백업용으로 널리 쓰이는 테이프를 대체하는 것이 가능해졌다. 그러나 데이터 기록면이 외부에 노출되어 있는 광학 저장 매체의 특성상 스크래치와 같은 표면의 손상으로 쉽게 데이터를 손실할 수 있으므로 데이터를 장기간 동안 안정적으로 보관하기 위해서는 신뢰도를 향상시킬 수 있는 기법이 필요하다. 이를 위해 저장할 데이터에 LDPC 코드를 적용하여 중복 데이터를 생성하고 중복 데이터들을 광학 저장 매체 상에 요구 신뢰도를 충족시켜줄 수 있는 간격을 갖도록 고루 분산 시켜 배치하는 방법을 이용해 신뢰도를 향상시켰다.

제주지역 풍력발전량 실시간 감시 시스템 구축에 관한 연구 (A Study on the Real-Time Monitoring System of Wind Power in Jeju)

  • 김경보;양경부;박윤호;문창은;박정근;허종철
    • 한국태양에너지학회 논문집
    • /
    • 제30권3호
    • /
    • pp.25-32
    • /
    • 2010
  • A real-time monitoring system was developed for transfer, receive, backup and analysis of wind power data at three wind farm(Hang won, Hankyung and Sung san) in Jeju. For this monitoring system a communication system analysis, a collection of data and transmission module development, data base construction and data analysis and management module was developed, respectively. These modules deal with mechanical, electrical and environmental problem. Especially, time series graphic is supported by the data analysis and management module automatically. The time series graphic make easier to raw data analysis. Also, the real-time monitoring system is connected with wind power forecasting system through internet web for data transfer to wind power forecasting system's data base.

Information Technology Infrastructure for Agriculture Genotyping Studies

  • Pardamean, Bens;Baurley, James W.;Perbangsa, Anzaludin S.;Utami, Dwinita;Rijzaani, Habib;Satyawan, Dani
    • Journal of Information Processing Systems
    • /
    • 제14권3호
    • /
    • pp.655-665
    • /
    • 2018
  • In efforts to increase its agricultural productivity, the Indonesian Center for Agricultural Biotechnology and Genetic Resources Research and Development has conducted a variety of genomic studies using high-throughput DNA genotyping and sequencing. The large quantity of data (big data) produced by these biotechnologies require high performance data management system to store, backup, and secure data. Additionally, these genetic studies are computationally demanding, requiring high performance processors and memory for data processing and analysis. Reliable network connectivity with large bandwidth to transfer data is essential as well as database applications and statistical tools that include cleaning, quality control, querying based on specific criteria, and exporting to various formats that are important for generating high yield varieties of crops and improving future agricultural strategies. This manuscript presents a reliable, secure, and scalable information technology infrastructure tailored to Indonesian agriculture genotyping studies.

LabVIEW를 이용한 풍력발전기 모니터링 시스템 개발 (Development of a Wind Turbine Monitoring System using LabVIEW)

  • 남윤수;김형기;유능수;이정완
    • 한국정밀공학회지
    • /
    • 제20권5호
    • /
    • pp.92-98
    • /
    • 2003
  • A wind turbine monitoring system is essential equipment fur the performance evaluation and mechanical load analysis of a wind turbine. A monitoring system using LabVIEW is developed in this study. This system monitors signals from a meteorological mast, wind turbine generator, and tower. The discrete signals which are sampled at t Hz are automatically saved on a data file in the unit of a day. Besides these basic functions, the developed monitoring system has the other several capabilities. One of them is the information access from a remote PC through the internet. A vision image of the test site area and data files that are produced by LabVIBW software can be uploaded to the main computer located in a remote site. An emergency backup system using UPS fur the power loss on the monitoring HW is also prepared, A detail explanation for the developed wind turbine monitoring system is presented in this study.

The Relationship between NDVI and Forest Leaf Area Index in MODIS Land Product

  • Woo C.S.;Lee K.S.;Kim K.T.;Lee S.H.
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
    • /
    • pp.166-169
    • /
    • 2004
  • NDVI has been used to estimate several ecological variables including leaf area index (LAI). Global MODIS LAI data are partially produced by empirical model that is based on the assumption of high correlation between NDVI and LAI. This study attempts to evaluate the MODIS empirical model by comparing with the result obtained from field LAI measurement and Landsat ETM+ reflectance. MODIS LAI product and ancillary data were analyzed over a small forest watershed near the Seoul metropolitan area. The relationship between NDVI of ETM+ and field measured LAI did not correspond to MODIS LAI estimation. Since the study area is mostly covered by very dense and fully closed forest, the correlation between NDVI and LAI might not be high. Although MODIS LAI product has great potential for global environment studies, it needs to be cautious to use them in regional and local area in particular for the forest of dense canopy situation.

  • PDF

유비쿼터스 교통환경에서 실시간 데이터 저장을 위한 시스템 구조 및 저장 알고리즘 (System Architecture and Data Backup Strategy for Real-Time Data Processing in Ubiquitous Transportation Environment.)

  • 백호현;이동욱;김재훈;백정희;이정우
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2008년도 춘계학술발표대회
    • /
    • pp.557-560
    • /
    • 2008
  • 본 논문에서는 유비쿼터스 지능형교통시스템(u-ITS: Ubiquitous Intelligent Transportation System)에서 발생하는 다량의 데이터를 실시간 저장하기 위해 메인 메모리 데이터베이스(MMDB: Main Memory Database)와 디스크 상주 데이터베이스(DRDB: Disk Resident Database)를 사용하는 시스템 구조와 RM(Rate Monotonic)를 기반으로 데이터의 발생 주기에 따라 MMDB와 DRDB에 실시간 저장하는 알고리즘을 제안한다.

PosCFS+: A Self-Managed File Service in Personal Area Network

  • Lee, Woo-Joong;Kim, Shi-Ne;Park, Chan-Ik
    • ETRI Journal
    • /
    • 제29권3호
    • /
    • pp.281-291
    • /
    • 2007
  • Wearable computers consisting of various small devices such as smart phones, digital cameras, MP3 players and specialized I/O devices in personal area networks will play an important role in future ubiquitous computing. In this environment, accessing user data is quite complex due to the dynamic and heterogeneous characteristics of the underlying networks. Moreover, since the amount of user data increases rapidly, automatic data backup management is also critical. To overcome these challenges, several studies have been conducted including our previously proposed file service system, PosCFS, which could be adapted to the requirements with a virtualization technique allowing per-user global namespace for managing and accessing data stored on physical storage spaces detected in PAN. In this paper, we present a smart file service framework, PosCFS+ which is an improved and extended version of our previous work. Performance improvement is made possible by redesigning the metadata management scheme based on database and keywords rather than ontology. In addition, the automatic data replication management is newly designed based on the OSD protocol.

  • PDF

낸드 플래시 메모리와 PSRAM을 이용한 비동기용 불휘발성 메모리 모듈 설계 (Design of Asynchronous Non-Volatile Memory Module Using NAND Flash Memory and PSRAM)

  • 김태현;양오;연준상
    • 반도체디스플레이기술학회지
    • /
    • 제19권3호
    • /
    • pp.118-123
    • /
    • 2020
  • In this paper, the design method of asynchronous nonvolatile memory module that can efficiently process and store large amounts of data without loss when the power turned off is proposed and implemented. PSRAM, which takes advantage of DRAM and SRAM, was used for data processing, and NAND flash memory was used for data storage and backup. The problem of a lot of signal interference due to the characteristics of memory devices was solved through PCB design using high-density integration technology. In addition, a boost circuit using the super capacitor of 0.47F was designed to supply sufficient power to the system during the time to back up data when the power is off. As a result, an asynchronous nonvolatile memory module was designed and implemented that guarantees reliability and stability and can semi-permanently store data for about 10 years. The proposed method solved the problem of frequent data loss in industrial sites and presented the possibility of commercialization by providing convenience to users and managers.