• Progress in Medical Physics
• /
• v.18 no.1
• /
• pp.27-34
• /
• 2007

Respiration sating radiotherapy technique developed In consideration of the movement of body surface and Internal organs during respiration, is categorized into the method of analyzing the respiratory volume for data processing and that of keeping track of fiducial landmark or dermatologic markers based on radiography. However, since these methods require high-priced equipments for treatment and are used for the specific radiotherapy. Therefore, we should develop new essential method whilst ruling out the possible problems. This study alms to obtain body surface motion by using the couch based computer-controlled motion phantom (CBMP) and US sensor, and to develop respiration gating techniques that can adjust patients' beds by using opposite values of the data obtained. The CBMP made to measure body surface motion is composed of a BS II microprocessor, sensor, host computer and stopping motor etc. And the program to control and operate It was developed. After the CBMP was adjusted by entering random movement data, and the phantom movements were acquired using the sensors, the two data were compared and analyzed. And then, after the movements by respiration were acquired by using a rabbit, the real-time respiration gating techniques were drawn by operating the phantom with the opposite values of the data. The result of analysing the acquisition-correction delay time for the data value shows that the data value coincided within 1% and that the acquistition-correction delay time was obtained real-time $(2.34{\times}10^{-4}sec)$. And the movement was the maximum movement was 6 mm In Z direction, In which the respiratory cycle was 2.9 seconds. This study successfully confirms the clinical application possibility of respiration gating techniques by using a CBWP and sensor.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.9 no.1
• /
• pp.144-154
• /
• 2003

Recently, in the academic disciplines critical thinking has been emphasized as the new evolution in education. Problem-based learning is suggested as the evolutionary learning method in developing critical thinking. In the nursing education, PBL is offered as an appropriate teaching method to prepare nurse student for professional. PBL is a student-centered learning strategy aimed at developing critical thinking, motivating self-directed study and attaining autonomy. The purpose of this study was to develop the communication curriculum of nursing education based on PBL and implementing of it. PBL module was developed focused on five communication situations. And learning strategies to facilitate the learning process and the guided questions to stimulate student inquiry were also developed. This PBL education was conducted for six students in the master's course during the 14 weeks from March, 2000 to June, 2000. The outcomes of the PBL education were examined based on the content analysis of the students reflective journal. As a result, it was found that students experienced the effect of it focused on self-oriented, group-oriented, and practice-oriented domain. In the self-oriented domain, the findings indicate that there were 5 kinds of concepts including 'motivation for self-directed study', 'transition toward certainty in knowledge acquisition', 'attempt to apply their prior knowledge into new situation', 'enhancement of self-image in real situation', 'self-growth with self reflection'. In the group-oriented domain, there were 3 kinds of concepts including 'cognitive work in group', 'perception of co-responsibility in attaining learning objectives', 'socialization with group members'. In the practice-oriented domain, there were 3 kinds of concepts including 'linkage theoretical knowledge with real situation', 'attempt to apply in real situation', 'development problem solving skill in real situation'. In conclusion, PBL had a significant effect on self, group, and clinical domain. And assessing PBL outcomes is challenging because standardized instrument do not develop yet. So the findings of this study can suggest the basic data for examining the PBL outcome.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.648-654
• /
• 2018

Currently, the Defense Agency for Technology and Quality (DTaQ), which is responsible for the quality assurance of military supplies, divides munitions into four categories, in order to conduct its governmental quality assurance activities, including product examination, process review and system audit. However, these 4 categories may differ depending on the related organizations' (e.g. Defense Acquisition Program Administration, munitions manufacturing) military requirements. Therefore, in this study, appropriate classification criteria for munitions are suggested for the sake of the efficient procurement, production and quality assurance of military supplies. We investigated the item classification system of the Public Procurement Service, which is a similar organization to the DTaQ. We also compared the appropriate classification criteria with those of related organizations and identified the current status of munitions classification data according to the current standard. In addition, application samples are presented using the proposed quality assurance classification criteria. Finally, the classification criteria of military supplies proposed in this paper will contribute to improving the efficiency of government quality assurance activities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.184-190
• /
• 2020

In this study, two analyses were conducted in relation to the defense procurement agency. The first was a questionnaire survey conducted by defense business personnel to quantitatively measure the effectiveness of the defense procurement agency's utilization. In the second, the appropriate standard for brokerage fees was developed, the actual work of the defense procurement agency in overseas sales was surveyed, and the brokerage profit of the general product was applied to the defense procurement agency's brokerage profit data. Using the defense procurement agency was 1.07 times more effective than not using it, and the appropriate brokerage fee varied according to the project size. For medium / small projects, 5.1 ~ 8.7% of the total project cost is an appropriate brokerage fee, compared to 1.2 ~ 1.8% for big-scale projects. The government's appropriate brokerage fee is not fixed, but is elastically applied according to the size of the total project cost, and it is appropriate to analyze the characteristics of the project and identify and adjust the required activity cost in advance.

• International Journal of Contents
• /
• v.11 no.1
• /
• pp.41-51
• /
• 2015

Management systems for electronic library have been developed on the basis of Client/Server or ASP framework in domestic market for a long time. Therefore, both service provider and user suffer from their high cost and effort in management, maintenance, and repairing of software as well as hardware. Recently in addition, mobile devices like smartphone and tablet PC are frequently used as terminal devices to access computers through the Internet or other networks, sophisticatedly customized or personalized interface for n-screen service became more important issue these days. In this paper, we propose a new scheme of integrated management system for electronic library based on SaaS and Web Standard. We design and implement the proposed scheme applying Electronic Cabinet Guidelines for Web Standard and Universal Code System. Hosted application management style and software on demand style service models based on SaaS are basically applied to develop the management system. Moreover, a newly improved concept of duplication check algorithm in a hierarchical evaluation process is presented and a personalized interface based on web standard is applied to implement the system. Algorithms of duplication check for journal, volume/number, and paper are hierarchically presented with their logic flows. Total framework of our development obeys the standard feature of Electronic Cabinet Guidelines offered by Korea government so that we can accomplish standard of application software, quality improvement of total software, and reusability extension. Scope of our development includes core services of library automation system such as acquisition, list-up, loan-and-return, and their related services. We focus on interoperation compatibility between elementary sub-systems throughout complex network and structural features. Reanalyzing and standardizing each part of the system under the concept on the cloud of service, we construct an integrated development environment for generating, test, operation, and maintenance. Finally, performance analyses are performed about resource usability of server, memory amount used, and response time of server etc. As a result of measurements fulfilled over 5 times at different test points and using different data, the average response time is about 62.9 seconds for 100 clients, which takes about 0.629 seconds per client on the average. We can expect this result makes it possible to operate the system in real-time level proof. Resource usability and memory occupation are also good and moderate comparing to the conventional systems. As total verification tests, we present a simple proof to obey Electronic Cabinet Guidelines and a record of TTA authentication test for topics about SaaS maturity, performance, and application program features.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.15-19
• /
• 2015

We demonstrated an inspection system for detecting discoloration of PCB Cu ball pad with an OSP surface finish. Though the OSP surface finish has many advantages such as eco-friendly and low cost, however, it often shows a discoloration phenomenon due to a heating process. In this study, the discoloration was analyzed with device-independent CIELAB color space. First of all, the PCB samples were inspected with standard lamps and CCD camera. The measured data was processed with Labview program for detecting discoloration of Cu ball pad. From the original PCB sample image, the localized Cu ball pad image was selected to reduce the image size by the binarization and edge detection processes and it was also converted to device-independent CIELAB color space using $3{\times}3$ conversion matrix. Both acquisition time and false acceptance rate were significantly reduced with this proposed inspection system. In addition, $L^*$ and $b^*$ values of CIELAB color space were suitable for inspection of discoloration of Cu ball pad.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.648-654
• /
• 2004

The Mass Flow Controller(MFC) has become crucial in semiconductor manufacturing equipments. It is an important element because the quality and the yield of a semiconductor process are decided by the accurate flow control of gas. Therefore, the demand for implementing the high speed and the highly accurate control of MFCs has been increasing. It is hard to find an article of the control algorithm applied to MFCs. But, it is known that commercially available MFCs adopt PID control algorithms. Particularly, when the system detects the flow by way of heat transfer, the MFC control problem includes the slow response and the nonlinearity. In this paper, MFC control algorithm with a superior performance to the conventional PID algorithm is discussed and the superiority is demonstrated through the experiment. A fuzzy controller was utilized in order to compensate the nonlinearity and the slow response, and the performance is compared with that of an MFC currently available in the market. The control system, in this paper, consists of a personal computer, the data acquisition board and the control algorithm carried out by LabWindows/CVI program on the PC. In addition, a method of estimating the actual flow from the sensor output with the slow response is presented. In conclusion, according to the result of the experiment, the proposed algorithm shows better accuracy and is faster than the conventional controller.

• Journal of Korean Academy of Nursing
• /
• v.29 no.4
• /
• pp.963-976
• /
• 1999

This study was undertaken to investigate the general characteristics of students, which include the degree of satisfaction, motives of admission, the recognition of advantages and disadvantages, opinion of students on self-directed learning, and planning and anticipatory effects after graduation. Data was collected through a questionnaire survey over a period of four months, from May 1997 to August 1997. The subjects used for this study consisted of 322 RN students sampled from six RN-to-BSN programs in Korea using the census sampling method. Statistical methods employed for this study included discriptive statistics, M ANOVA, and F-test. The results of the study are as follows 1. The RN students' motives of admission to RN-to-BSN programs were ‘for personal advancement’, ‘to earn a BSN degree’, and ‘for professional development’ in this order. 2. The RN students' responses to the advantages of RN-to-BSN programs were ‘acquisition of new knowledge and a BSN degree’ and ‘to gain professional thinking and a broader view’, while as the disadvantages of RN-to-BSN programs were ‘geographical isolation of institutions’, ‘limitation of information’, and ‘underdeveloped school environments’ in this order. 3. The survey based on opinions toward self-directed learning showed that there was a need of detailed guidelines for self-directed learning. Most agreed that it was a very effective learning method for a RN student, and the self-directed learning method Increases motives for learning. 4. The students' anticipatory effect after graduation were ‘self-achievement’, ‘development of professional skills’, and ‘admission to post-graduate school or programs to study abroad’. 5. The students were very satisfied with the quality of faculty members, and satisfied with the quality of lectures and teaching. However, students were unsatisfied with rented lecture rooms, and very unsatisfied with self-directed learning methods. 6. School nurses showed higher statistical significances in the need for teaching material and anticipatory effect after graduation than other RN students working in hospitals and public health agencies. Also, school nurses, public health nurses, and industry nurses showed higher statistical significances in motives of admission than RN students working in hospitals. Further more, staff nurses, school nurses, and industry nurses showed higher levels of satisfaction toward a RN-to-BSN programs than nurses in higher positions, such as administrators or directors of nursing. 7 City residents were more satisfied with RN-to-BSN programs than rural residents. Otherwise, the rural residents had higher motives for admission, a bigger need for teaching materials, and recognition of the disadvantages of RN-to-BSN programs than city residents. Finally, RN students who earned below a monthly income of ￦1,000,000 showed higher motivation for admission than those who earned more than ￦1,000,000.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.2
• /
• pp.147-163
• /
• 2009

This study was attempted in order to look into 'Assist work' as to Implant system which dental hygienists perform in a clinical field. Subjects of this research were 362 dental hygienists who work at general hospital, University hospital, dental hospital, and dental clinics located in Seoul, Kyeong-gi, In-chon, and Jeon-buk area. As to research tool, we produced questionnaire which was comprised of the total 25 items regarding 3 of general features (age, career of dental hygienist, and personality), 6 of implant system assist work, 3 of Informed consent before surgery, 6 of preoperative preparation and maintenance related business, and 7 items related to postoperative maintenance. By using SPSS program, collected data was analyzed. Results of analysis in this study were as follow; 1. As to implant related education, dental hygienists' experience of education was high as 77.7%, and the people who is needed more education was 86.3%. Consequently, dental hygienists' concern about the implant related education was very high. 2. It was observed that most of informed consent making approvement by announcement to the surgical operation was made by dental hygienist before implant as 95%. 3. Over 80% of dental hygienists performed acquisition of cleanliness technology, motivation, back up articles preparation, treatment area arrangement, and etc. which we can check by preoperative maintenance items. In particular, response about the motivation was very high as more than 90%. 4. When performing an operation, in the case of disinfecting finger was low for 53.9% and the method was mainly washing with drug solution, and gown sterilization was performed only in 52.2%. Therefore education regarding disinfection was urgently needed. 5. Significance of education could be known that answers of hygienists experienced education appeared highly in items of maintenance method and there was statistically significant difference(p<0.05). 6. In case that assist work were 21cases or greater, agitation measurement was the most many performed in 68.9% and difference was showed up significantly(p<0.001). 7. Evaluation about periodontal tissue was high in dental hygienists who had experienced education and also there was statistically significant difference. In conclusion, assist work of dental hygienists was very comprehensive when implant surgery was performed, and all of items excluding hand disinfection or gown disinfection were highly showed up in most of hygienists. However, since there is the limit that we didn't investigate the quality of performing contents. It is considered that further study regarding the content has to be progressed for supporting this result in the future.

• Journal of Environmental Impact Assessment
• /
• v.27 no.3
• /
• pp.251-266
• /
• 2018

This study predicted the effect of operation pattern of flood control dam on water quality. Flood control dam temporarily impound floodwaters and then release them under control to the river below the dam preventing the river ecosystem from the extreme flood. The Hydrological Simulation Program Fortran (HSPF) and the Environmental Fluid Dynamics Code (EFDC) were adapted to predict the water quality before and after the dam construction in the proposed reservoir. The non-point pollutant delivery load from the river basin was estimated using the HSPF, and the EFDC was used to predict the water quality using the provided watershed boundary conditions from the HSPF. As a result of water quality simulation, it is predicted that the water quality will be improved due to the decrease of pollution source due to submergence after dam construction and temporary storage during rainfall. There would be no major water quality issues such as the eutrophication in the reservoir since the dam would impound the floodwater for a short time (2~3 days). In the environmental impact assessment stage of a planned dam, there may be some limitations to the exact simulation because the model can not be sufficiently calibrated. However, if the reliability of the model is improved through the acquisition of actual data in the future, it will be possible to examine the influence of the water environment according to various operating conditions in the environmental impact assessment of the new flood control dam.