• Korean Journal of Plant Resources
• /
• v.9 no.3
• /
• pp.224-229
• /
• 1996

Floral flavonoids of Hibiscus syriacus L. six complex with 68 formac all in all were examined. Thirteen flavonoids appeared on the two dimensional chromatogtams. Spot 5, however, occupied more than 50% in total flavonoid contents, and other spots were invariably minor pigments in all samples examined. Ten spots among 13 spots showed the characteristics of flavones, having color of purple to dark purple under UV light and yellow under ammonia gas, while spots reagents suggests that 10 purple spots are 4', 5-OH aglycone type. Four spots out of 10 purple spots were possible to be identified: spot 5, saponarin, spot 7, vitexin, spot 9, xylovitexin, and spot 11, rhamnosylvitexin, respectively. It was suggested that spot 13 might be apigenin-7-O-diglycoside.

• Korean Journal Plant Pathology
• /
• v.10 no.4
• /
• pp.336-338
• /
• 1994

In 1991, the leaf brown spot of ivy-aureus (Scindapsus aureus) was found in Taejon and Seoul, Korea. The symptoms were appeared as dark-brown spots. The lesions were often surrounded by yellowish halos. These spots were enlarged to circular or elliptical in shape and dark-brown to black in color with slightly elevated in margin and sunken in center. The pathogenic bacteria were isolated from the diseased leaf of ivy-aureus were identified as Erwinia chrysanthemi on the basis of bacterial characteristics therefore, we would like to propose to the name of ivy-aureus disease caused by E. chrysanthemi as“bacterial brown rot of ivy-aureus”hereafter.

• Journal of Surface Science and Engineering
• /
• v.49 no.4
• /
• pp.331-338
• /
• 2016

In this work, anodic oxidation behavior of AZ31 Mg alloy was studied as a function of $Na_2CO_3$ concentration in electrolyte by voltage-time curves and observation of surface appearances and morphologies after the anodic treatments, using optical microscopy and confocal scanning laser microscopy (CSLM). The voltage-time curves of AZ31 Mg alloy surface and surface appearances after the anodic treatments showed three different regions with $Na_2CO_3$ concentration : region I, below 0.2 M $Na_2CO_3$ where shiny surface with a number of small size pits; region II, between 0.4 M and 0.6 M $Na_2CO_3$ where dark surface with relatively low number of large size burned or dark spots; region III, more than 0.8 M $Na_2CO_3$ where bright surface with or without large size dark spots were obtained. The anodically treated AZ31 Mg alloy surface became significantly brightened with increasing $Na_2CO_3$ concentration from 0.5 M to 0.8 M which was attribute to the formation of denser and smoother surface films. Pits and porous protruding reaction products were found at relatively large size and small size spots, respectively, on the AZ31 Mg alloy surface in low concentration of $Na_2CO_3$ less than 0.2 M. The formation of pits is attributed to the result of repetition of the formation and detachment of porous anodic reaction products. Based on the experimental results obtained in this work, it is concluded that more uniform, denser and smoother surface of AZ31 Mg alloy could be obtained at more than 0.8 M $Na_2CO_3$ concentration if there is no other oxide forming agent.

• Journal of Surface Science and Engineering
• /
• v.50 no.5
• /
• pp.308-314
• /
• 2017

Anodic film formation behavior of AZ31 Mg alloy was studied as a function of NaOH concentration in 1 M $Na_2CO_3$ + 0.5 M $Na_2SiO_3$ solution under the application of a constant anodic current density, based on the analyses of voltage-time curves, surface appearances and morphologies of the anodically formed PEO (plasma electrolytic oxidation) films. The anodic film formation voltage and its fluctuations became largely lowered with increasing added NaOH concentration in the solution. Two different types of film defects, large size dark spots indented from the original surface and locally extruded white spots, were observed on the PEO-treated surface, depending on the concentration of added NaOH. The large size dark spots appeared only when added NaOH concentration is less than 0.2 M and they seem to result from the local detachments of porous PEO films. The white spots were observed to be very porous and locally extruded and their size became smaller with increasing added NaOH concentration. The white spot defects disappeared completely when more than 0.8 M NaOH is added in the solution. Concludingly it is suggested that the presence of enough concentration of $OH^-$ ions in the carbonate and silicate ion-containing electrolyte can prevent local thickening and/or detachment of the PEO films on the AZ31 Mg alloy surface and lower the PEO film formation voltage less than 70 V.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.171-178
• /
• 2008

Metal filter elements were newly introduced to the high temperature filter(HTF) system in the low- and intermediate-level radioactive waste vitrification plant. In order to evaluate the performance of various metal materials as filter media, elements made of AISI 316L, AISI 904L, and Inconel 600 were included to the test set of filter elements. At the visual inspection to the elements performed after completion of each test, a few dark spots were observed on the surface of some elements. Especially they were found much more at the AISI 316L elements than others. To check the dark spots are the corrosion phenomena or not, two kinds of analyses were performed to the tested filter elements. Firstly, the surfaces or the cross sections of filter specimens cut out from both normal area and dark spot area of elements were analyzed by SEM/EDS. The results showed that the dark spots were not evidences of corrosion but the deposition of sodium, sulfur and silica compounds volatilized from waste or molten glass. Secondly, the ring tensile strength were analyzed for the ring-shape filter specimens cut out from each kind of element. The result obtained from the strength tested showed no evidence of corrosion as well. Conclusionally, depending on the two kinds of analysis, no evidences of corrosion were found at the tested metal filter elements. But the dark spots formed on the surface could reduce the effective filtering area and increase the overall pressure drop of HTF system. Thus, continuous heating inside filter housing up to dew point will be required normally. And a few long-period test should be followed for the exact evaluation of corrosion of the metal filter elements.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.893-896
• /
• 2003

Plasma polymerized para-xylene (PPpX) thin films deposited by plasma enhanced chemical vapor deposition (PECVD) were used to passivate the organic light emitting diodes (OLEDs). For OLEDs, indium tin oxide (ITO), N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-diphenyl-4,4'-diamine (TPD), tris(8-hydroxyquinoline) aluminum $(Alq_{3})$ and aluminum (Al) were used as the anode, the hole transport layer (HTL), the emitting layer (EML) and the cathode, respectively. The OLED device with the PPpX passivation film (passivated device) showed similar electrical and optical characteristics to those of the OLED device without the PPpX passivation film (control device), indicating that the PECVD process did not degrade the performance of the OLEDs notably. The lifetime of the passivated device was two times longer than that of the control device. Passivation of OLEDs with PPpX films also suppressed the growth of dark spots. The density and size of dark spots of the passivated device were much smaller than those of the control device.

• Korean Journal of Poultry Science
• /
• v.22 no.4
• /
• pp.233-238
• /
• 1995

A computer vision system was built to generate images of a single, stationary egg. This system includes a CGD camera, a frame grabber, and incandescent back lighting system. Image processing algorithms were developed to inspect egg shell and to sort eggs. Those values of both gray level and area of dark spots in the egg image were used as criteria to detect holes in egg and those values of both area and roundness of dark spots in the egg image were used to detect cracks in egg. For a sample of 300 eggs, this system was able to correctly analyze an egg for the presence of a defect 97.5% of the time. The weights of eggs were found to be linear to both the projected area and the perimeter of eggs viewed from above. Those two values were used as criteria to sort eggs. The coefficients of determination(r$^2$) for the regression equations between weights and those two values were 0.967 and 0.972 in the two sets of experiment. Accuracies in grading were found to be 95.6% and 96.7% as compared with results from sizing by electronic weight scale.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.281-288
• /
• 2007

Photoperiod sensitive genetic male sterile (PGMS) rice is sterile mutant controlled by photoperiod. A PGMS mutant 920S was sterile grown under long-day (LD) photoperiod (14 h light/10 h dark) but fertile grown under short-day (SD) photoperiod (10 h light/14 h dark). Proteome analysis revealed that 12 protein spots were differentially expressed in the spikelets of 920S plants either treated with LD or SD photoperiod. Among these proteins, three proteins including chlorophyll a/b binding protein, vacuolar ATPase ${\beta}-subunit,\;{\alpha}-tubulin$ and an unknown protein were more than three-fold abundant in the spikelet of the SD-treated plants than those of the LD-treated plants. On the other hand, eight proteins including acetyl transferase, 2, 3- biphosphoglycerate, aminopeptidase N, pyruvate decarboxylase, 60S acidic ribosomal protein and three unknown protein spots were more abundant in the spikelets of the LD-treated plants than those of the SD-treated plants. The results suggest that the observed proteins may be involved in sterile or fertile pollen development under LD or SD photoperiod respectively in the PGMS mutant rice.

• The Korean Journal of Mycology
• /
• v.48 no.4
• /
• pp.511-518
• /
• 2020

This study was conducted to isolate and identify the fungal pathogen caused unreported post-harvest disease on apples (cv. Fuji) fruit in Korea. The disease symptoms on apples appeared as irregular, light to dark brown, slightly sunken spots. The three fungal strains were isolated from infected tissues of apple fruits and their cultural and morphological characteristics were completely consistent with those of Plenodomus collinsoniae. The phylogenetic analysis using the internal transcribed spacer (ITS) regions, beta-tubulin (TUB), and the second largest subunit of RNA polymerase II (RPB2) sequences revealed the closest relationship of the isolates with Plenodomus collinsoniae at the species level. The pathogenicity test showed the same dark brown spots on Fuji apple cultivar. Therefore, P. collinsoniae is a newly reported fungal agent causing post-harvest disease on apples in Korea.

• Corrosion Science and Technology
• /
• v.23 no.5
• /
• pp.393-401
• /
• 2024

Zn-Al-Mg hot-dip-galvanized steel sheets exhibit some specific surface phenomena that have not been observed on GI coatings and have only been published to a limited extent. One visually very striking optical appearance has been discussed in the literature under the names "freckles" and "dark spots." However, only a rough formation mechanism has been described to date. Brisberger et al. found foreign particles in the center of the defect that could be considered to be a nucleation seed for a freckle. However, the influence of these occurrences on processing properties has not yet been described. For more detailed information on the formation and cause of freckles, metallographic examinations and laboratory trials were carried out in a hot-dip galvanizing simulator to gain a fundamental understanding of the formation mechanism. Topography and processing properties, such as phosphatability, paint appearance, forming properties, and corrosion resistance, were assessed by various methods. Freckles exhibited locally altered crystallization due to a foreign particle, which has an impact on the Zn-Al-Mg coating itself as well as its complex microstructure. New findings on the formation mechanism were obtained from investigations with our hot-dip simulator, which showed possibilities for controlling these surface phenomena in an industrial environment.