• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.109-115
• /
• 2010

Interstitial-free (IF) steels are widely used for car body material. However, a few types of streaky mark defect are commonly found on hot dip galvannealed (GA) IF steel sheets. In the present study, both the phase structure of a streaky mark defect and the microstructure of the substrate just below it were characterized by optical microscopy (OM) and scanning electron microscopy (SEM). It was found that the bright streaky mark area was composed of ${\delta}$ phase while the dark normal area was full of craters. More than half of the grains at the uppermost surface of the substrate just below the streaky mark defect are unrecrystallized grains which could result from lower finish rolling temperature during hot rolling and be kept stable during the annealing process, while almost all the grains in the normal area are equiaxed grains. In order to confirm the effect of the unrecrystallized grains on the coating morphology, hot dip galvannealing simulation experiments were carried out in IWATANI HDPS. It is proved that the unrecrystallized grains accelerate the Fe-Zn reaction rate during galvannealing and result in a flatter coating surface and an even coating thickness. Finally, a formation mechanism of the streaky mark defect on the hot dip galvannealed IF steel sheet was discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.123-127
• /
• 2007

Up sizing of dye-sensitized solar cell(DSC) is the important technology to bring about commercialization of DSC. Several studies to obtain a stable large area DSC have been investigated in overseas laboratories, but have been hardly done in our country. In this study, up sizing technology of dye sensitized solar cells(DSCs) was investigated. We investigated low dark current materials for the current collecting grid. From the result, a new DSC module with metal grid was designed, and fabricated. For a new interconnection, both working and counter electrodes are alternately coupled on 10[cm]$\times$7[cm] substrate. We have achieved 68% of fill factor and photoelectric conversion efficiency of around 2.6% as the best results of new designed DSC structure.

• Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.123-129
• /
• 2011

To determine whether rearing density affects the hypermelanosis on the blind side (ambicoloration) of olive flounders Paralichthys olivaceus, we reared fry with an unpigmented non-eyed (blind) side in duplicate at densities of 150 individuals/$m^2$ (commercial production density: control) and 450 individuals/$m^2$ (high density group) for 90 days in 1-t dark-green fiberglass reinforced plastics (FRP) tank. We recorded feed intake, feed conversion efficiency (FE), growth and survival, and measured the ratios of staining blind-side area (staining area) and ambicolored fish every 30 days. Daily feed intake (DFI), feed conversion efficiency (FE), growth rate, condition factors, and survival rate were calculated at the end of the experiment. Although the FE was higher in the high-density compared to the control, the two density groups showed similar feed intakes, growth, and survival. The ratio of staining area as well as the ratio of ambicolored fish significantly were significantly higher in the high-density group than in the control from days 30 to 60, but significantly increased and evened out by the end of the experiment (P<0.05). In conclusion, we determined that rearing density is not the main cause of the blind-side hypermelanosis, but found that increasing the rearing density can accelerate the ambicoloration in olive flounders.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.1
• /
• pp.243-249
• /
• 1997

Adenoid cystic carcinoma is a malignant salivary gland tumor with typical histologic patterns. The majority of these tumors occurs in the minor salivary glands. especially mucosa of the hard palate. The authors experienced the patients, who complained the tumor-like soft tissue masses on the palatal and mouth floor area. After careful analysis of clinical, radiological and histopathological findings, we diagnosed them as adenoid cystic carcinomas in the minor salivary glands, and obtained results were as follows : 1. Main clinical symptoms were a slow growing soft tissue mass with normal intact mucosa on the palatal area, and soft tissue mass with mild pain on the mouth floor area. 2. In the radiographic exarnminations, soft tissue masses were observed with invasion to adjacent structures, and moderate defined, heterogeneous soft tissue mass with enhanced margin, respectively. 3. In the histopathologic exarnminations, dark-stained, small uniform basaloid cells in the hyaline or fibrous stroma were observed as solid and cribriform patterns, respectively.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2004.11a
• /
• pp.135-140
• /
• 2004

The purpose of this research is to investigate the characteristics of Jeju recreational pension. This research is carried out by on site inspection and the survey on management of the recreation facilities. A target of research is sixteen facilities of recreation pension in Jeju-do. Recreational pension was created by Jeju Free International City of special law in 2000. Jeju Recreational pension has characteristics as follows : The land area of that is $1300m^{2}{\sim}6300m^{2}$, the number of guest rooms are 10, and the area of guest rooms are $29m^{2}{\sim}100m^{2}$. Especially most of them are in Namjeju-gun. Also, they mostly have R.C. structure, and materials of exterior are artificiality stone. The color of an outer walls are mostly white and light-beige and that of the roofs are mainly dark-brown. On plot plan, it has 4type of prototype; type of outbuilding, arranging in a row, corridor, hall and composition of three types with public area. The outside facilities are equipped by handy golf courses and outdoor barbecue cooking sites. Unfortunately, most of pensions don't reflect the characteristics of architecture factors in Jeju.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.432-432
• /
• 2007

We studied optical simulation method for ultra slim backlight system. We designed 0.7mm thickness light guide plate and combined 48 white color LEDs for 12 inch wide size TFT-LCD. We designed flat shape PMMA light guide plate with both side patterned. It have vertical prism shape on upper side and ellipse dot pattern on the other side. We targeted 4500 nit brightness and uniform emission characteristic without hot spot or dark area. At first, we designed uniform emission area with more high brightness in center area and then, debugged light entering hot spot zone and direction of outgoing light flux. Although it was designing step, we obtained good result with reverse prism optical sheet and it had good repeatability because it was based on the stamper method in injection process without laser engraving or micro groove engraving method.

• Journal of Species Research
• /
• v.10 no.2
• /
• pp.159-163
• /
• 2021

Saussurea albifolia, a new species, is reported from the Baekdudaegan Mountains. It has distinctive morphological characteristics that distinguish it from other congeneric species of Saussurea in Korea; radical leaves persist or withered till flowering, white tomentose leaf beneath, campanulate involucre with brown-cobwebby hairs, and dark purplish phyllaries with acuminate tips. Saussurea albifolia is a new, endemic species, narrowly restricted to the Korean Peninsula as a consequence of adaptation to alpine or subalpine environments of the Baekdudaegan Area. Among the Korean species of Saussurea, S. gracilis Maxim., S. insularis Kitam., and S. seoulensis Nakai are morphologically similar to S. albifolia by having leaves with white hairs beneath and persistent radical leaves during blooming period. It has been well understood that Saussurea is one of the highly diversified and adaptable groups in Asteraceae and also that the currently recognized species in Korea likely significant underestimates its diversity on the Korean Peninsula.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.318-323
• /
• 2014

Purpose: This study was carried out to predict the growth period and fresh weight of sprouts grown in a cultivator designed to grow sprouts under optimal conditions. Methods: The temperature, light intensity, and amount of irrigation were controlled, and images of seed sprouts were acquired to predict the days of growth and weight from pixel counts of leaf area. Broccoli, clover, and radish sprouts were selected, and each sprout was cultivated in a 90-mm-diameter Petri dish under the same cultivating conditions. An image of each sprout was taken every 24 hours from the 4th day, and the whole cultivating period was 6 days, including 3 days in the dark. Images were processed by histogram inspection, binary images, image erosion, image dilation, and the overlay image process. The RGB range and ratio of leaves were adjusted to calculate the pixel counts for leaf area. Results: The correlation coefficients between the pixel count of leaf area and the growth period of sprouts were 0.91, 0.98, and 0.97 for broccoli, clover, and radish, respectively. Further, the correlation coefficients between the pixel count of leaf area and fresh weight were 0.90 for broccoli, 0.87 for clover, and 0.95 for radish. Conclusions: On the basis of these results, we suggest that the simple image acquisition system and processing algorithm can feasibly estimate the growth period and fresh weight of seed sprouts.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.67-76
• /
• 2016

This study was conducted to examine the optimal environmental condition for promoting the growth of sowthistle as affected by light quality and photoperiod in a closed-type plant production system. Seeds were sown in 240-cell plug trays and then germinated for 3 days at a 24-hour photoperiod in a closed-type plant production system with LED lights (R:B:W = 8:1:1). Seedlings were transplanted and grown under 3 types of LED (R:B:W = 8:1:1, R:W = 3:7, or R:B = 8:2) and 4 photoperiods (24/0, 16/8, 8/16, or 4/20 hours) with $230{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light intensity at a density of $20cm{\times}20 cm$. The experimental design was a randomized complete block design. Plants were cultured for 40 days un der the condition of $21{\pm}2^{\circ}C$ and $70{\pm}10%$ relative humidity after transplanting. Plants were fed with a recycling nutrient solution (pH 7.0 and EC $2.0dS{\cdot}m^{-1}$) contained in a deep floating tank. Fresh weight and dry weight of shoot or root, leaf length, and leaf area were the greatest in the photoperiod of 24/0 (light/dark) with RW LED. The highest number of leaves occurred in the photoperiod of 16/8 (light/dark) with RB LED, while the incidence of tip burn was higher in the photoperiod of 24/0 (light/dark) compared to the other treatments. Chlorophyll value was the highest in the 16/8 (light/dark) photoperiod and there was no significant difference by light quality. Chlorophyll fluorescence was the lowest in the photoperiod of 24/0 (light/dark) compared with other treatments. Therefore, in terms of economic feasibility and productivity for Ixeris dentata Nakai cultivation in a closed-type plant production system, the results obtained suggest that plants grew the best when kept in a photoperiod of 16/8 (light/dark) and light quality of combined LED RW (3:7).

• Economic and Environmental Geology
• /
• v.30 no.6
• /
• pp.553-566
• /
• 1997

Origin, behavior and enrichment of environmental toxic elements from the Deokpyeong area were investigated on the basis of major, trace and rare earth element geochemistry. Coaly metapelites of the Deokpyeong area are subdivided into grey phyllite, dark grey phyllite, coaly slate and black slate, which are interbedded along the Ogcheon Supergroup. The coaly slate had been mined for coal, but mining is closed. The coaly and black slates are lower contents of $SiO_2$ and $Al_2O_3$, and higher contents of LOI, CaO, $Na_2O$ and BaO as compared with the phyllitic rocks. Rare earth elements are highly enriched in the coaly and black slate. Average compositions (ppm) of minor and/or environmental toxic elements in the coaly and black slate are revealed as As=127, Ba=30,163, Cd=18, Cr=740, Cu=84, Mo=378, Pb=43, Sb=12, Se=44, U=144, V=8,147 and Zn=292, which are extremely high concentrations than those in the NASC compositions. Major elements (average enrichment index; 5.34) in the coaly metapelites are mostly depleted, excepting $P_2O_5$ and BaO, normalized by NASC. Rare earth elements (average enrichment index; 1.48) are enriched in the coaly slate. On the basis of NASC, minor and/or environmental toxic elements in the coaly metapelites were strongly enriched of all the elements with the exception of Co, Cs, Ni and Sr. Average enrichment index of trace elements in coaly metapelite is 31.51 (coaly slate; 51.94 and black slate; 15.46). Especially, enrichment index of potentially toxic elements (As, Ba, Cr, Cu, Mo, Ni, Sb, Se, U, V and Zn) of the rock is 46.10 (grey phyllite; 7.15, dark grey phyllite; 4.77, coaly slate; 88.96 and black slate; 22.11). These coal formations were deposited in basin of boundary between terrestrial and marine environments deduced to carbon, sulfur (C/S=2.2 to 275.7), trace and rare earth elements characteristics. Irregular behavior and dispersion between major, minor and rare earth elements of those metapelites indicates a variable source materials, incomplete mixing of differential source and/or reequilibrium of diagenesis and metamorphism.