• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1890-1894
• /
• 2006

해안지하수유출량의 평가는 물수지분석에 있어 불확실성이 큰 요인인 지하수 함양량에 대한 정밀도를 높일 수 있으며 해안지역의 수자원 개발가능량의 근거를 제시 할 수 있을 것으로 판단된다. 이에 본 연구에서는 해안지역의 지하수유출량 평가를 위하여 지하수기초조사보고서와 광역지하수보고서를 이용하여 지하수유출량 산정을 위한 기초자료를 수집하고 이를 바탕으로 정밀지하수해안유출량 및 주요하천권역별 지하수해안 유출량을 산정하였다. 전국의 해안지역 중 낙동강권역, 영산강-섬진강권역, 금강권역의 지하수기초조사사업이 수행된 지역을 대상으로 지하수 및 대수층특성자료에 대하여 지하수기초조사보고서를 중심으로 조사하고 Darcy의 법칙을 적용하여 연안유역의 정밀 지하수해안유출량을 산정하였다. 지하수기초조사가 수립되지 않은 지역은 광역지하수조사보고서를 이용하여 지하수해안유출량를 산정하고 이를 정밀지하수해안유출량과 통합하여 주요하천권역별 지하수해안유출량을 평가하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.17-24
• /
• 2005

Korean pine (Pinus koraiensis Sieb.et Zucc.) boards of 30 mm thickness were treated by steaming and four different drying methods. Small specimens were taken from the sapwoods of the treated boards and their longitudinal liquid permeability was measured according to Darcy's law. The specimens were also extracted with alcohol and aceton solutions to examine the mechanism of liquid flow in wood. It was observed that specific permeability drastically decreases with measurement time, resulting in violation of Darcy's law. It may be due to that air bubbles formed under vacuum block flow paths in resin canals. The average specific permeabilities of non-extracted and extracted specimens are different from one treatment to another. It is supposed that the properties of residual resin in resin canals change depending on the conditions of treatments. Anatomical examination was conducted with a scanning electron microscope.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.82-91
• /
• 1997

The major objective of this study is to establish analytical technique in order to analyze the behaviour of semi-solid material considering induction heating of the billet. Induction heating process is analyzed by using commerical finite element software. ANSYS. The finite element program, SFAC2D, for the simulation of deformation in semi-solid state is developed in the present study. The semi-solid behaviour is described by a viscoplastic model for the solid phase, and by the Darcy's law for the liquid flow. Simple compression and closed-die compression process considering induction heating are analyzed, and also it is found that the distribution of initial solid fraction of the billet has an important effect on deformation behaviour of semi-solid material. In order to verify the effectiveness of proposed analytical technique the simulation result is compared with experimental result.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.110-114
• /
• 1996

The objective of this study is to consider the induction heating process and to develop the finite element program to analyze the behaviour of semi-solid materials. The semi-solid material is assumed to be composed of solid region as rigid visco-plastic model and liquid region following Darcy's law. Induction heating process is analyzed using finite element software, ANSYS, and also the behaviour of a semi-solid material considering induction heating is analyzed using developed finite element program.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.11
• /
• pp.1059-1065
• /
• 2004

In this paper, the dynamic characteristic analysis of carriage structure supported by air bearings were performed. Toward this end, the characteristics of air bearing were numerically analyzed to estimate the stiffness of the air bearing and the clearance between air bearing and guide surface. The modal analysis of the carriage structure was performed by using finite element method, and the experimental modal analysis was also performed to validate the finite element model, where rigid body modes were compared to validate the stiffness of the air bearings. From the results, the air spring stiffness can be estimated within the range of acceptable accuracy under any pressure and clearance condition.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.266-271
• /
• 2001

Buoyancy-driven natural convection is analysed by employing a linear stability theory in hori-zontal porous media with net through flow. Darcy's law is used to model the flow characteristics in porous media. Bated on the results of linear stability analysis, a heat transfer correlation was obtained by employing weakly nonlinear analysis. As the net through flow increases, the system becomes more stable and the effect of the Darcy-Rayleigh number on the Nusselt number decreases.

• Journal of the Speleological Society of Korea
• /
• no.87
• /
• pp.34-43
• /
• 2008

카르스트는 자연수의 용식작용에 의하여 형성되는 지형이다. 용식은 카르스트 지형에 있어 가장 우세한 과정이 아니며, 또한 지배적인 과정도 아니지만, 그것은 다른 유형의 지형에서 형성되는 결과보다 용해질 암석에서 더 다양한 역할을 하기 때문이다. 용식의 가장 중요한 역할은 바위의 침투성을 증가시키면서 지하의 공간을 확대시키는 데 있다. 이는 지하수에 의해 지표면의 점진적인 용식적인 변화인 카렌, 석문, 용천, cockpit 및 mogote, sinkholes, hum 등의 카르스트 지형을 창출한다. 수문학의 대표적인 이론인 Darcy's Law가 용식지형에서는 전혀 적용되지 않는다는 검증 결과만 하더라도 카르스트가 얼마나 다양하고 복잡한 수문학적인 형성과정을 가지고 있는가를 알 수 있을 것이다. 특히 Darcy의 법칙은 비등방성과 비균질적인 투수층에는 적용되지 않는다. 왜냐하면 카르스트 지역에서는 1차삼투율(primary transmissivity)의 공극율에 따른 투과율이 적용되는 일반적인 암석에서의 결과보다 2차삼투율(secondly transmissivity인 단층선, 균열, 절리면 등에 의한 투과율이 훤씬 증대되기 때문이다. 따라서 카르스트수문학은 자연수의 용식작용에 의하여 형성되는 지형이지만 투수성, 지하수의 유속, 동공속의 소지류의 구배, 입수율과 배출율 등이 일반적인 수문학과 다른 결과를 나타내고 있다.

• Resources Recycling
• /
• v.21 no.5
• /
• pp.38-43
• /
• 2012

In this study, analysis of the flow of water in the soil environment was attempted to examine the changing patterns of permeability coefficient, k, presented in Darcy's law depending on soil particle size and the pattern of mixed soil that main factor affecting ground water flow in soil environment. In addition, permeability coefficient patterns depending on changes in water temperature and concentration were measured. As a result, the permeability for the soil particle size and mixing pattern is proportional to the size of the particles, and it was also influenced by the porosity depending on the mixed pattern and stratification. Especially compared with the single particle, mixing different sizes samples showed a lower k than the value of smaller single particles. In addition, permeability of groundwater increased with increasing temperature, also permeability decreased depending on the concentration of ions in groundwater. The results of this study were expected to use as meaningful data for the phenomenon reflects the characteristics of the soil to understand mobility of groundwater in soil environment.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.683-688
• /
• 2007

Water flow into unsaturated soils is most often modeled by Richards equation consisting of the mass conservation law and Darcy's law. Three standard forms of Richards equation are presented as the head (${\Psi}$)-based form, the moisture content (${\theta}$) based form, and the mixed form. Numerical solutions of these partial differential equations with highly nonlinear terms can cause poor results along with significant mass balance errors. The numerical solution based on the mixed form of Richards equation is known that the mass is perfectly conserved without any additional computational efforts. The aim of this study is to develop fully implicit numerical scheme of Richards equation for one-dimensional vertical unsaturated flow in homogeneous soils using the finite difference approximation, and then to perform sensitivity analysis of infiltration to the variations in the unsaturated soil properties and to different soil types.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.30-38
• /
• 2009

In recent years, there's been strong demand for coastal structures that have a permeability that serves water affinity and disaster prevention from wave attack. The aim of this study is to examine the wave transformation, including wave run-up that propagates over the coastal structures with a steep slope. A numerical model based on the nonlinear shallow water equation, together with the unsteady nonlinear Darcy law for fluid motion in permeable underlayer and laboratory measurements was carried out in terms of the free surface elevations and fluid particle velocities for the cases of regular and irregular waves over 1:5 impermeable and permeable slopes. The numerical results were used to evaluate the application and limitations of the PBREAK numerical model. The numerical model could predict the cross-shore variation of the wave profile reasonably, but showed less accurate results in the breaking zone that the mass and momentum influx is exchanged the most. Except near the wave crest, the computed depth averaged velocities could represent the measured profile below the trough level fairly well.