• 한국안전학회지
• /
• 제28권3호
• /
• pp.56-62
• /
• 2013

The occurrence of the ventricular fibrillation is directly dependent on the magnitude and duration of the current. The current which flows through the human body is proportional to the touch voltage applied across the body and is in inverse proportion to the impedances in the circuit. The circuit impedances consist of human body impedance, line impedance, equipment impedance, earth terminal impedance and impedance of shoes which a person put on. The impedance of shoes greatly affect the severity of the electric accidents. The human body impedances relevant to the contact areas, contact conditions, current paths and touch voltages are already determined in the IEC 60479-1. However, the impedance of shoes is ignored or substituted by a simple value because of the absence of the sufficient data. For example, the impedance of shoes plus ground contact resistance is postulated to be $1,000{\Omega}$ in the IEC 61200-612. In IEEE 80, the shoe resistance plus ground contact resistance is assumed to be bare foot with ${\rho}/4b{\Omega}$. In this paper, we measured and analyzed the impedance of shoes with respect to conditions such as applied weight, environment variables and voltages. The results showed that the impedance of shoes is dependent on environment variables regardless of the types of shoes. Most of shoes showed the correlation with the applied force, whereas a few shoes showed characteristics related to the applied voltage. In terms of severity of electric shock, one thirds of test samples indicated to be dangerous in saltwater conditions.

• 한국화재소방학회논문지
• /
• 제18권1호
• /
• pp.18-23
• /
• 2004

본 논문은 IEC형 불꽃점화 시험장치를 이용하여 저압 유도회로의 최소 점화한계를 프로판-공기 5.25 Vol.%의 혼합 가스에 대하여 실험적으로 구하였으며, 또한 유도회로의 인덕턴스 L에 안전소자로서 저항을 병렬접속 하였을 경우 프로판-공기 5.25 Vol.%의 혼합 가스에 대한 점화한계 개선효과를 고찰하였다. 그 결과, 최소 점화한계는 전류의 크기에 따라 좌우되었다. 또한, 전원으로부터 공급되는 에너지는 인덕턴스에 우선 축적되고, 그 초과분의 에너지가 폭발성 가스의 점화원으로 작용하였다. 점화한계 개선효과는 인덕턴스가 300mH일 때, 최고 330%의 개선효과가 나타났으며 인덕턴스가 클수록 점화한계 개선효과가 크게 나타났다. 또한 병렬로 접속한 저항의 크기가 적을수록 점화한계 개선 효과가 크다. 본 연구결과는 본질안전 방폭형 전기기기의 연구개발을 위한 기본자료로 활용할 수 있을 뿐만 아니라 이들 기기의 방폭 성능에 대한 시험자료로도 활용이 가능할 것으로 사료된다.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.42-48
• /
• 2009

Pipe welding is used in various ranges such as civil engineering and ship building engineering. Until now, many technicians work for pipe welding manually under harmful, dangerous and difficult conditions. So it is necessary to install automation process. For automation pipe welding, relation between welding parameters & bead shape should be considered. Using this relation, bead shape could be expected from welding parameters. FCAW was used in this study. Instead of pipe workpiece, fillet joint plate is used, which were inclined 0,45,90,135,180 degree. By analyzing between welding parameters (current, welding speed, voltage) and bead shape parameters with non-linear multiple regression, bead shape parameters could be expected. Piecewise Cubic Hermite Interpolation was used to expect smooth curved bead shape with bead shape parameters. From these processes, bead shape could be expected from welding parameters.

• 상하수도학회지
• /
• 제27권5호
• /
• pp.547-554
• /
• 2013

Chlorine has strong oxidizing power, also it is many advantages over other disinfectants such as the residual characteristic and economic feasibility. However, chlorine also has disadvantages such as creating disinfection by-products of chlorine as THMs. In particular, the most deadly disadvantage of chlorine is that it is extremely poisonous toxins about all alive lives. Disinfection with electrolysis water can be a very useful way Because you do not have to worry about chlorine's dangerous. In this study, we evaluated the potential as a disinfectant, across the evaluating disinfection effect and generating characteristic of by-products. The electrolyzed water could be obtained removal efficiencies of over 99.9 % the coliform by operating condition such as residence time, current density (voltage), the electrode gap. The residual chlorine be generated 10,000 mg/L in current density $1.0A/dm^2$ and residence time of 10 minutes. The residual chlorine concentration was possible to maintain a stable. The by-products generated by high concentration residual chlorine in the reactor such as trihalomethanes, haloaceticacid, chloralhydrate, haloacetonitrile were detected in less than a water quality standards. At the concentration of less than residual chlorine of 1 ppm, the chlorine disinfection by-products be generated most below the detection limit.

• 한국화재소방학회논문지
• /
• 제25권1호
• /
• pp.50-56
• /
• 2011

최근 지구온난화에 의한 영향으로 낙뢰의 발생빈도가 증가하는 추세이고, 낙뢰에 수반되는 뇌격전류의 강도 또한 강해지고 있는 추세이다. 2008년 기준 국내의 낙뢰 발생 빈도는 56만여 건 정도가 발생하였으며, 낙뢰로 인한 인명피해 사고 및 건축구조물의 피해는 나날이 증가하고 있다. 특히, 낙뢰로 인한 전기화재는 낙뢰 발생에 따른 대지전위 상승으로 접지선과 전원선간 절연파괴 과정에서 발생되며, 현장조사 결과, 낙뢰 발생 지역에 인접한 지역에서 동시다발적으로 전기적 피해가 발생하였다. 낙뢰에 대한 피해를 방지하기 위해서는 낙뢰 보호 장치의 설치 및 등전위 접지 시행 등의 방법이 요구된다. 또한 낙뢰로 인한 화재현장 조사에 있어서는 기상청에서 제공되는 낙뢰 발생 기록 및 화재현장과 인접한 지역에서 동시다발적인 전기적 특이점 형성 여부에 대한 검토가 필요하다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.390-390
• /
• 2012

Information technology industries has grown rapidly and demanded alternative memories for the next generation. The most popular random access memory, dynamic random-access memory (DRAM), has many advantages as a memory, but it could not meet the demands from the current of developed industries. One of highlighted alternative memories is magnetic random-access memory (MRAM). It has many advantages like low power consumption, huge storage, high operating speed, and non-volatile properties. MRAM consists of magnetic-tunnel-junction (MTJ) stack which is a key part of it and has various magnetic thin films like CoFeB, FePt, IrMn, and so on. Each magnetic thin film is difficult to be etched without any damages and react with chemical species in plasma. For improving the etching process, a high density plasma etching process was employed. Moreover, the previous etching gases were highly corrosive and dangerous. Therefore, the safety etching gases are needed to be developed. In this research, the etch characteristics of CoFeB magnetic thin films were studied by using an inductively coupled plasma reactive ion etching in $CH_4/O_2/Ar$ gas mixes. TiN thin films were used as a hardmask on CoFeB thin films. The concentrations of $O_2$ in $CH_4/O_2/Ar$ gas mix were varied, and then, the rf coil power, gas pressure, and dc-bias voltage. The etch rates and the selectivity were obtained by a surface profiler and the etch profiles were observed by a field emission scanning electron microscopy. X-ray photoelectron spectroscopy was employed to reveal the etch mechanism.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.282-286
• /
• 2000

In this paper, magneto-rheological(MR) damper is studied for vibration control of large infra structures under earthquake. Generally, active control devices need a large control force and a high power supply system to reduce the vibration effectively. Large and miss tuned control force may induce the dangerous situation such that the generated large control force acts to amplify the structural vibration. Recently, to overcome the weaknesses of the active control, the semi-active control method is suggested by many researchers. Semi-active control uses the passive control device of which the characteristics can be modified. Control force of the semi-active device is not generated from the actuator with power supply. It is generated as a dynamic reaction force of the device same as in the passive control case, so the control system is inherently stable and robust. Unlike the case of passive control, control force of semi-active control is adjusted depending on the measured response of the structure, so the vibration can be reduced more effectively against various unknown environmental loads. Magneto-rheological(MR) damper is one of the semi-active devices. Dynamic characteristics of the MR material can be changed by applying the magnetic fields. So the control of MR damper needs only small power. Response time of MR to the input voltage is very short, so the high performance control is possible. MR damper has a high force capacity so it is adequate to the vibration control of large infra structure. Because MR damper has a nonlinear property, normal control method used in active control may not be effective. Clipped optimal control, modified bang-bang control etc. have been suggested to MR damper by many researchers. In this study, sliding mode fuzzy control(SMFC) is applied to MR damper. Genetic algorithm is used for the controller tuning. To verify the applicability of MR damper and suggested algorithm, numerical simulation on the aseismic control is carried out. Simulation model is three-story building structure, which was used in the paper of Dyke, et al. The control performance is compared with clipped optimal control. The present results indicate that the SMFC algorithm can reduce the earthquake-induced vibration very effectively.

• 한국융합학회논문지
• /
• 제12권4호
• /
• pp.1-8
• /
• 2021

현재 자동차를 포함한 에너지 저장장치 제품에는 리튬 이온 배터리가 주로 사용되고 있으며, 이를 과충전하거나, 고온 상황에 방치하는 잘못된 배터리 관리 상황 발생시 폭발 등 위험한 상황에 노출될 수 있으며, 과방전 시 배터리 불능 상황을 야기한다. 이로 인해 배터리 상태를 관리해주는 시스템이 필요하며 배터리 관리 시스템은 배터리 상태를 정확하게 인지하고 각 셀의 전압을 일정하게 유지하여 최적의 배터리 효율을 얻는 데 목적이 있다. 본 논문에서는 일반적 리튬이온배터리에 비해 고안전성을 갖는 리튬인산철 배터리팩과 이를 관리하기 위해 Matlab Simulink 기반의 시뮬레이션을 사용하여 셀 특성을 확인할 수 있는 RC등가회로 모델을 이용한 분석방법을 제시하고, 저전력 및 상호통신간섭이 적은 블루투스 기반 BMS 모듈의 알고리즘을 개발하였다.

• 한국안전학회지
• /
• 제39권2호
• /
• pp.1-8
• /
• 2024

Unwanted effects of electrostatic phenomena occur in various industries. Electrostatic problems originating from the human body in flammable atmospheres in the industry are especially concerning. A substantial volume of experimental data on the electrostatic charging voltages created on the human body owing to the rubbing of apparel were generated and reviewed during this study. The data were reviewed to determine whether the resultant charging levels of the human body are hazardous in flammable atmospheres. This study was conducted under several conditions, such as different fiber types used in apparel, shoe types, and relative humidities (RHs). The following conclusions were drawn in this study. ① The electrostatic charging levels of the human body owing to the rubbing of apparel increase with the increase in the surface resistances of apparel; however, the electrostatic charging levels may be different depending on the condition of the cloth surface. ② The discharging energy of 1.98-18.5 [mJ] from the human body exceeds the minimum ignition energy of most flammable materials, when removing an overcoat made of polyester, cotton and wool under severe conditions such as wearing height-raising shoes for men. ③ When removing antistatic apparel, the maximum discharging energy of 0.128 mJ from the human body is dangerous if the minimum ignition energy of the flammable material is between 10^-5-10^-4 [J] Grade; however, a minimum ignition energy of 10^-3 J Grade of the flammable material is considered safe. ④ While wearing antistatic shoes, the electrostatic charging voltage generated in the human body when removing an overcoat is 30 V; therefore, wearing such shoes is a suitable countermeasure when handling flammable materials. However, the antistatic abilities of shoes reduce when thick socks are worn. ⑤ As RH increases, the electrostatic charging levels of the human body decrease. ⑥ The electrostatic charging levels of the human body from removing a cotton overcoat can ignite the majority of flammable materials when RH is less than 30% under severe conditions such as wearing height-raising shoes for men.

• 융합신호처리학회논문지
• /
• 제20권1호
• /
• pp.16-23
• /
• 2019

PM 2.5로 불리는 초미세먼지는 인간의 건강을 해치는 2.5 ㎛ 이하 직경의 입자크기를 갖는 공기 중의 미세먼지를 말하며, 미세먼지 집중도는 공기 질 정보로 사용할 수 있다. 사람은 일반적으로 90% 이상을 실내에서 거주하며 실내에 대한 공식적인 먼지 집중도 자료는 제공되지 않기 때문에, 본 연구는 실내의 관점에서 공기 질 측정에 초점을 두었다. 실내 먼지데이터 모니터링은 병원과 같은 환경에서 매우 중요할 뿐만 아니라 교실, 시멘트 공장, 컴퓨터 서버 룸, 석유화학 저장고 등의 장소에서도 유용하게 사용할 수 있다. 본 논문에서는 전자기파로부터 자유로운 실내 먼지 모니터링을 위해 맨체스터 코딩기법을 이용한 가시광 통신 시스템을 제안한다. 넓은 범위의 먼지 집중도를 포함한 중요한 실내 환경정보가 가시광 채널을 통해 전송된다. 강력한 주변광 및 저주파 잡음 제거를 위해 평균전압트레킹 기법을 사용한다. 입력광은 광다이오드에 의해 수신되고, 동시에 수신 마이크로콘트롤러에 의해 신호처리 한다. 사용자는 실시간으로 실내 공기 질 정보를 모니터링 할 수 있으며, 공기 질 정보에 따라 미리 적합한 대처를 할 수 있다.