• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.29.2-29.2
• /
• 2009

구리는 낮은 비저항, 높은 열전도도, 우수한 electromigration(EM)저항특성 등을 바탕으로 차세대 nano-scale집적회로의 interconnect application에 적합한 금속재료로서 각광받고 있다. copper interconnect는 damascene process 를주로 이용하는데 CVD를 이용하면 step coverage가우수한 seed layer얻을 수 있어 고집적 소자의 구현이 가능하다. 최근에 비 균등화 반응(disproportionationreaction)을 이용하여 고 순도 구리박막을 제조하기위해 $\beta$-diketonate Cu(I) Lewis-base의 전구체를 많이 이용하는데 그중에서 hexafluoroacetylacetonate(hfac)Cu(I)vinyltrimethylsilane (VTMS)가 널리 이용되고 있다. 그러나 (hfac)Cu(I)(VTMS) 또는 유사계열의 전구체들은 열적안정성및 보관안정성이 부족하여 실제 양산공정에 적합하지 못한 단점이 있었다. 본 연구에 이용된 2가 전구체Cu(dmamb)2는 높은 증기압($70^{\circ}C$, 0.9torr)을 가지며 종래에 주로 이용하던 1가 전구체 (hfac)Cu(VTMS)에 비해 높은 활성화 에너지(~113 kJ/mol)를가짐으로서 열적안정성 및 보관안정성이 우수하다. 다른 한편으로 2가전구체는 안정성이 우수한 만큼 낮은 증기압을 극복하기 위해 리간드에 플루오르를 주로 치환하여 증기압을 높이는데 플루오르는 성장하는 박막의 접착력을약하게 하는 단점을 가진다. 하지만 본 연구에 사용된 Cu(dmamb)2는 리간드에 플루오르를 포함하지 않으며, 따라서 고품질의 박막을 용이한성장환경에서 제조할 수 있는 장점들을 제공한다. 비활성가스 분위기에서 2가전구체는 열에너지에 의해 리간드의 자가환원에따라 금속-리간드 분해가 발생한다. 하지만 수소분위기에서는수소가 환원제로 작용하여 리간드의 분해를 용이하게 하는 특징을 가지며 따라서 비활성분위기일 때 비해 낮은 성장온도를 가진다. 또한 수소는 잔류하는 리간드 및 불순물과 결합하여 휘발성화학종들을 생성하여 고순도의 구리박막제조를 가능하게한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.546-546
• /
• 2008

Copper (Cu) Chemical mechanical polishing (CMP) has been an essential process for Cu wifing of DRAM and NAND flash memory beyond 45nm. Copper has been employed as ideal material for interconnect and metal line due to the low resistivity and high resistant to electro-migration. Damascene process is currently used in conjunction with CMP in the fabrication of multi-level copper interconnects for advanced logic and memory devices. Cu CMP involves removal of material by the combination of chemical and mechanical action. Chemicals in slurry aid in material removal by modifying the surface film while abrasion between the particles, pad, and the modified film facilitates mechanical removal. In our research, we emphasized on the role of chemical effect of slurry on Cu CMP, especially on the effect of amine functional group on removal rate selectivity between Cu and Tantalum-nitride (TaN) film. We investigated the two different kinds of complexing agent both with amine functional group. On the one hand, Polyacrylamide as a polymer affected the stability of abrasive, viscosity of slurry and the corrosion current of copper film especially at high concentration. At higher concentration, the aggregation of abrasive particles was suppressed by the steric effect of PAM, thus showed higher fraction of small particle distribution. It also showed a fluctuation behavior of the viscosity of slurry at high shear rate due to transformation of polymer chain. Also, because of forming thick passivation layer on the surface of Cu film, the diffusion of oxidant to the Cu surface was inhibited; therefore, the corrosion current with 0.7wt% PAM was smaller than that without PAM. the polishing rate of Cu film slightly increased up to 0.3wt%, then decreased with increasing of PAM concentration. On the contrary, the polishing rate of TaN film was strongly suppressed and saturated with increasing of PAM concentration at 0.3wt%. We also studied the electrostatic interaction between abrasive particle and Cu/TaN film with different PAM concentration. On the other hand, amino-methyl-propanol (AMP) as a single molecule does not affect the stability, rheological and corrosion behavior of the slurry as the polymer PAM. The polishing behavior of TaN film and selectivity with AMP appeared the similar trend to the slurry with PAM. The polishing behavior of Cu film with AMP, however, was quite different with that of PAM. We assume this difference was originated from different compactness of surface passivation layer on the Cu film under the same concentration due to the different molecular weight of PAM and AMP.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Korean Chemical Engineering Research
• /
• 제54권4호
• /
• pp.548-554
• /
• 2016

Damascene 구조를 갖는 반도체소자의 구리금속배선 식각공정에서 배선재료에 의해서 발생되는 구리 식각잔류물을 제거하기 위해 oxalic acid (OA), lactic acid (LA) 및 citric acid (CA)의 카르복시산 함유된 반수계 혼합세정액을 제조하고 특성을 분석하였다. 카르복시산은 pH에 따라 카르복실기와 구리이온들과의 다양한 복합체를 형성하며 세정특성의 변화를 준다. 카르복시산들이 함유된 각각의 세정액의 세정특성평가결과 10 wt% CA를 함유한 반수계 세정액의 식각잔류물 세정특성은 pH 2에서 7까지의 영역에서 가장 낮은 구리 식각률을 보였으며 pH 2에서 4까지 구리에 대한 구리산화물의 가장 높은 식각 선택도를 나타내었으나 pH 5에서 7 범위에서는 10 wt% LA가 함유된 세정액이 더 높은 선택도를 보였다. 따라서 표면세정효과는 pH에 따라 변화하며 적절한 카르복시산을 사용함이 요구된다. CA가 함유된 세정액의 경우에 CA 농도와 구리에 대한 구리산화물의 식각 선택도의 증가특성을 보이며 CA가 5 wt%이상 함유된 경우에는 세정 후 구리배선의 표면이 88 %이상의 금속구리로 분석되어 구리산화물로 구성된 식각 잔류물의 제거에 효과적임을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.377-377
• /
• 2012

Microprocessor technology now relies on copper for most of its electrical interconnections. Because of the high diffusivity of copper, Atomic layer deposition (ALD) $TaN_x$ is used as a diffusion barrier to prevent copper diffusion into the Si or $SiO_2$. Another problem with copper is that it has weak adhesion to most materials. Strong adhesion to copper is an essential characteristic for the new barrier layer because copper films prepared by electroplating peel off easily in the damascene process. Thus adhesion-enhancing layer of cobalt is placed between the $TaN_x$ and the copper. Because, cobalt has strong adhesion to the copper layer and possible seedless electro-plating of copper. Until now, metal film has generally been deposited by physical vapor deposition. However, one draw-back of this method is poor step coverage in applications of ultralarge-scale integration metallization technology. Metal organic chemical vapor deposition (MOCVD) is a good approach to address this problem. In addition, the MOCVD method has several advantages, such as conformal coverage, uniform deposition over large substrate areas and less substrate damage. For this reasons, cobalt films have been studied using MOCVD and various metal-organic precursors. In this study, we used $C_{12}H_{10}O_6(Co)_2$ (dicobalt hexacarbonyl tert-butylacetylene, CCTBA) as a cobalt precursor because of its high vapor pressure and volatility, a liquid state and its excellent thermal stability under normal conditions. Furthermore, the cobalt film was also deposited at various $H_2/NH_3$ gas ratio(1, 1:1,2,6,8) producing pure cobalt thin films with excellent conformality. Compared to MOCVD cobalt using $H_2$ gas as a reactant, the cobalt thin film deposited by MOCVD using $H_2$ with $NH_3$ showed a low roughness, a low resistivity, and a low carbon impurity. It was found that Co/$TaN_x$ film can achieve a low resistivity of $90{\mu}{\Omega}-cm$, a low root-mean-square roughness of 0.97 nm at a growth temperature of $150^{\circ}C$ and a low carbon impurity of 4~6% carbon concentration.