• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.436-436
• /
• 2000

In order to monitor the belt from being damaged by impact of large lump of materials in ores being transported on conveyor belt, we developed a conveyor belt monitoring system using vision. By the information such as the position and size of the damage of belt obtained by vision system, it is expected that not only the span of belt life will be lengthened, but also this system can enable operators to plan scheduled maintenance and prevent the enlargement of damaged parts in conveyor belt at an early stage

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.8
• /
• pp.1169-1178
• /
• 2008

In this study, a questionnaire was compiled by conducting interviews and preliminary surveys, and then handed out to a total of 270 welders working in shipyards to investigate their opinions on welding clothes. By which investigation, it was intended to understand their dissatisfactions and issues with conventional welding clothes and then propose of such welding clothes as may offer better fit and suitability. A total of twenty welding suits were collected to find the locations and degrees of wear and tear. Due to too large differences in the locations and degrees of wear and tear among the clothes, the evaluation was focused on ten suits out of the twenty suits collected. The researcher’s subjective judgment was used to select the nineteen most severely damaged parts, which were then photographed in a uniform distance and evaluated by a group of experts in terms of the degree of damage in order to locate most severely damaged parts and select adequate materials for those parts in designing an experimental suit. Based on two above evaluations, the experimental welding suit was produced in consideration of the design, materials and patterns. A lab evaluation and a site evaluation were conducted to compare the experimental suit and other conventional suits, a lab evaluation and a field evaluation were performed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.6
• /
• pp.305-314
• /
• 2021

The Gyeongju and Pohang earthquakes caused damages to many cultural properties; particularly, stone pagoda structures were significantly damaged among masonry cultural properties. To preserve these structures, it is necessary to understand their dynamic behavior characteristics under earthquakes. Analyses on such areas as deformation, frequency, maximum acceleration, permanent displacement, sliding, and rocking have to be performed. Although many analytical studies have already been conducted, dynamic behavior studies based on experiments are insufficient. Therefore, this study analyzed dynamic behavior characteristics by performing a shaking table experiment on a three-story stone pagoda structure at the Cheollongsa temple site damaged by the Gyeongju earthquake. As a result of the experiment, the displacements of stylobates did not occur significantly, but the tower body parts rotated. In particular, the rotation of the 1F main body stone was relatively larger than that of the other chief body stones because the 1F main body stone is relatively more slender than the other parts. In addition, the decorative top was identified as the component most vulnerable to sliding. This study found that the 1F main body stone is vulnerable to rocking, and the parts located on the upper part are more vulnerable to sliding.

• Journal of Korean Biological Nursing Science
• /
• v.15 no.4
• /
• pp.210-218
• /
• 2013

Purpose: The purpose of this study was to identify the characteristics and nursing activities of severe trauma patients regarding damaged body parts in Busan Regional Emergency Medical Center. Methods: A survey using a 'trauma patient information questionnaire and a list of nurse activities' was conducted with 133 patients over 15 points ISS on EMR from June 1, 2011 to May 31, 2012. The collected data were analyzed by the SPSS/WIN 12.0 program. Results: Almost all of the subjects were men, and the mean age was 48.8. The amount of road traffic accidents was 60.4%, and the mean RTS and ISS were 6.08, and 23.14 points. Nursing activities in common were airway management, assessment of LOC & GCS, and EKG monitoring. Most of head and neck trauma patients were cared for manasing using intracranial pressure: each patience had the following assessed: pupil size and light reflex, they were checked the leak of CSF, kept $30^{\circ}$ head elevation, and administered medications. Some of chest trauma patients were treated for chest tube and central venous catheter insertion. Partial abdominal trauma patients were administered analgesic and cared for using arterial pressure measurement. Part of the limbs and pelvis trauma patients were given a blood transfusion. Conclusion: Based on the results, the characteristics and nursing activities were specific according to the specific damaged body parts.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.1
• /
• pp.19-28
• /
• 2007

Tunnel management is a time-consuming and expensive task. In particular, visual analysis of tunnel inspection often requires extended time and cost and shows problems on data gathering, storage and analysis. This study proposes a new approach to extract information for tunnel management by using a laser scanning technology. A prototype tunnel laser scanner developed was used to obtain point clouds of a railway tunnel surface. Initial processing of laser scanning data was to separate those laser pulses returned from the installations attached to tunnel liner using radiometric and geometric characteristics of laser returns. Once the laser returns from the installations were separated and removed, physically damaged parts on tunnel lining are detected. Based on the plane formed by laser scanner data, damaged parts are detected by analysis of proximity. The algorithms presented in this study successfully detect the physically damaged parts which can be verified by the digital photography of the corresponding location on the tunnel surface.

• Explosives and Blasting
• /
• v.36 no.1
• /
• pp.20-33
• /
• 2018

A locally damaged structure is a structure that cannot be reused due to having parts that have lost their structural function as a result of abnormal load across the interior or exterior of the structure. The causes of the abnormal load occurrences can be classified into natural disaster and artificial disaster. Locally damaged structures caused by this abnormal load have risk factors that may lead to the possibility of additional secondary collapses, so such structures require immediate and complete dismantling. The case presented in this study involves the application of explosive demolition to a steel truss structured bridge in the Philippines that was damaged due to construction failures and the hurricane. Although shaped charges were needed in explosive demolitions, difficulties in locally obtaining such material. So, we made a charge container to charging of emulsion explosive during the explosive demolition. The explosive demolition resulted in the vertical free fall of the mid-section of the bridge and the free fall rotating of the both end section of the bridge. The neighboring posts and bridge piers did not show signs of damages, while post-demolition fragmentation of removed parts was found to be satisfactory.

• Journal of Ginseng Research
• /
• v.15 no.3
• /
• pp.167-170
• /
• 1991

Radiation protective fraction was Isolated and partially purified from Korean white ginseng. The effect of the fraction was studied on the cell survival of W-damaged CHO-Kl cells. As a result, it was found that the fraction increased the survival rate of damaged cells significantly within the dose range of which cytotoxicity did not appear This fraction was separated into two parts by adding butanol, namely the precipitated protein component and the butanol extract. Damaged cells were treated with each of these components and their survival rates were measured. The protein component demonstrated significant increase in the survival rates, while the butanol extract showed no such increment. These results suggest that the radiation protective effect of the ginseng fraction is originated from the butanol-precipitated protein component, not from the butanol-soluble compounds.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.3
• /
• pp.167-176
• /
• 1999

This paper is concerned with the damage detection of existing 2 and 3-dimensional truss structures based on free vibration equation and extended Kalman filter. The local damage is characterized in terms of the stiffness degradation of damaged members. As the observed data, the natural frequencies and mode shapes of damaged truss structure model are adopted. Both location and stiffness of damaged parts of members in truss structures can be estimated by the proposed inverse solution procedure. The applicability and effectiveness of proposed inverse solution procedure are demonstrated through the numerical examples.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_1
• /
• pp.531-539
• /
• 2020

When injection mold is repeatedly used for mass production, fatigue phenomenon due to cyclic stress may occur. The surface and interior of structure might be damaged due to cyclic stress or strain. The objective of this study was to analyze failure of SCM435 high-tension bolts connecting upper and lower parts of a three-stage injection molding machine. These bolts have to undergo an accurate heat treatment to prevent the formation of chromium carbide and the action of dynamic stresses. Bolts were fractured by cyclic bending stress in the observation of ratchet marks and beach marks. Damaged specimen showed an acicular microstructure. Impurity was observed. Chromium carbide was observed near the crack origin. Both shape parameters of the Vickers hardness were similar. However, the scale parameter of the damaged specimen was about 20% smaller than that of the as-received specimen. Much degradation occurred in the damaged specimen. Bolts should undergo an accurate heat treatment to prevent the formation of chromium carbide. They must prevent the action of dynamic stresses. Bolts need accurate tightening and accuracy of heat treatment and screws need compression residual stress due to peening.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.55-62
• /
• 1985

This study was made on bamboo shoot's damage of Phyllostachys edulis by field mice in Jinju, Gyeongsangnam-do, and grasped the inhabitation environment by the analysis of around and lower vegetation in damaged bamboo stands, and made clear the species of field mice in damaged bamboo stand, the damaged degree and rate, therefore, were put in practice for contribution with damage prevention and extermination. The results were summarized as follows; The damaged degree were influenced by inhabitation environment and stand density around damaged bamboo stands. The damaged degree were shown 4,359.1 g with 7.1 shoots per. ha and the rate 0.23%. The damage season were from the middle of April to the middle and end of May, the most damaged season was about April 23. The length of damaged bamboo shoot was mean 28.12 cm, the inside diameter 7.49 cm, the weight 613.96 g. The damaged type of parts was shown to more numerous overland and surface damaged type of three types; overland, surface and underground damaged type. The field mice to be captured in damaged bamboo stand were three species; Apodemus agrarius coreae, Mus molossinus and Crocidura lasiura, the species of main damage was Apodemus agrarius coreae of captured Rodentia's 2 species. Crocidura lasiura in order Insectivora was found to inhabitate for the first time at southern region in Korea.