• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.914-921
• /
• 2006

To describe the effect of the numerous and various oriented microcracks on the compressive and tensile concrete behaviors, the directional nonlocality is defined. The plasticity model using multiple failure criteria is developed for RC planar members in tension-compression. The crack damages are defined in the pre-determined reference orientations, and then the total crack damage is calculated by integrating multi-oriented crack damages. To describe the effect of directional nonlocality on the anisotropic tensile damage, based on the existing test results, the nonlocal damage factor is defined in each reference orientation. The reduced compressive strength in the cracked concrete is defined by the multi-oriented crack damages defined as excluding the tensile normal plastic strain from the compressive equivalent plastic strain. The proposed model is implemented to finite element analysis, and it is verified by comparisons with various existing panel test results.

• 전산구조공학
• /
• 제9권2호
• /
• pp.163-171
• /
• 1996

구조물 모니터링 시스템의 전산환경을 구성하기 위해 필요한 지식 및 정보를 파악하고 이를 지식기반화하는 방법을 제시하였다. 전산환경의 구축을 위한 정보로는 센서 및 하드웨어, 신호처리, 그리고 손상발견/평가를 위한 지식등이 필요한데, 이들은 모두 다른 형태의 지식이므로, -즉 수학연산, 서술적 지식, 수치모델등- 어느 특정의 모델링 기법 단독으로는 이들을 효과적으로 수용하기가 매우 어렵다. 이를 해결하기 위하여 객체지향적 모델링기법과 논리언어를 혼합사용하는 방법 (Hybrid Modeling Paradigm)이 제시되었고, 이의 타당성 및 효율성 검증을 위해 모델구조물을 이용한 예제를 수행하였다.

• Structural Engineering and Mechanics
• /
• 제39권6호
• /
• pp.795-812
• /
• 2011

Estimation of damage probability of buildings under a future earthquake is an essential issue to ensure the seismic reliability. Fragility curves are useful tools for showing the probability of structural damage due to earthquakes as a function of ground motion indices. The purpose of this study is to compare the damage probability of R/C buildings with low and high level of strength and ductility through fragility analysis. Two different types of sample buildings have been considered which represent the building types mentioned above. The first one was designed according to TEC-2007 and the latter was designed according to TEC-1975. The pushover curves of sample buildings were obtained via pushover analyses. Using 60 ground motion records, nonlinear time-history analyses of equivalent single degree of freedom systems were performed using bilinear hysteretic model and peak-oriented hysteretic model with stiffness - strength deterioration for each scaled elastic spectral displacement. The damage measure is maximum inter-story drift ratio and each performance level considered in this study has an assumed limit value of damage measure. Discrete damage probabilities were calculated using statistical methods for each considered performance level and elastic spectral displacement. Consequently, continuous fragility curves have been constructed based on the lognormal distribution assumption. Furthermore, the effect of hysteresis model parameters on the damage probability is investigated.

• Structural Engineering and Mechanics
• /
• 제61권6호
• /
• pp.737-746
• /
• 2017

The touch down zone (TDZ) and top connection point of the vessel are most critical part of fatigue damage in the steel catenary riser (SCR). In general, the linear soil model has been used to evaluate fatigue performance of SCRs because it gives conservative results in the TDZ. However, the conservative linear soil model shows the limitation to accommodate real behavior in the TDZ as water depth is increased. Therefore, the riser behavior on soft clay seabed is investigated using a nonlinear soil model through time domain approach in this study. The numerical analysis considering various important parameters of the nonlinear soil model such as shear strength at mudline, shear strength gradient and suction resistance force is conducted to check the adoptability and applicability of nonlinear soil model for SCR design.

• Steel and Composite Structures
• /
• 제10권4호
• /
• pp.331-348
• /
• 2010

Ample research effort has been oriented into developing damage indices with the aim of estimating in a reasonable manner the consequences, in terms of structural damage and deterioration, of severe plastic cycling. Although several studies have been devoted to calibrate damage indices for steel and reinforced concrete members; currently, there is a challenge to study and calibrate the use of such indices for the practical evaluation of complex structures. The aim of this paper is to introduce an energy-based damage index for multi-degree-of-freedom steel buildings that accounts explicitly for the effects of cumulative plastic deformation demands. The model has been developed by complementing the results obtained from experimental testing of steel members with those derived from analytical studies regarding the distribution of plastic demands on several steel frames designed according to the Mexico City Building Code. It is concluded that the approach discussed herein is a promising tool for practical structural evaluation of framed structures subjected to large energy demands.

• 대한환경공학회지
• /
• 제32권5호
• /
• pp.499-508
• /
• 2010

이 연구에서는 피해산정형 모델에 기초하여 제품 환경성 관련 정보를 국내 지리적, 환경적, 사회적 특성을 최대한 반영하여 '화폐가치'로 나타낼 수 있는 전과정 영향평가 지표를 제시하였다. 먼저 평가단계를 '특성화', '피해평가', 통합화의 3단계로 구분하였으며, 자원소비, 지구온난화, 오존층영향, 산성화, 부영양화 및 광화학산화물 생성의 6대 영향범주를 고려하였다. 아울러 6대 영향범주와 관련된 16개 범주별 종말점과 4대 보호대상에 대한 피해함수 및 피해계수를 도출하였다. 최종적으로 도출된 영향범주별 기준물질의 통합화 지수는 21.8원/kg Sb, 6.19원/kg $CO_2$, 53,000원/kg CFC-11, 13,100원/kg $SO_2$, 2,310원/kg ${PO_4}^{3-}$, 3,030원/kg $C_2H_4$로 나타났다. 이 연구결과를 활용하여 제품 전과정에 걸쳐 발생하는 환경부하가 보호대상에 미치는 영향을 화폐가치로 단일 지수화할 수 있으므로 도출되는 전과정 영향평가 결과의 이해도와 활용도를 높일 수 있다.

• Wind and Structures
• /
• 제25권6호
• /
• pp.569-588
• /
• 2017

The aim of this paper is to present a method to obtain the dynamic response of a wind turbine tower in time domain by means of the generation of time series and to estimate the associated fatigue damage by means of a Rainflow counting algorithm. The proposed method is based on assuming the vortex shedding is a bidimensional phenomena and on following a classical modal superposition method to obtain the structure dynamic response. Four different wind turbine tower geometric configurations have been analyzed in a range of usual wind velocities and covering extreme wind velocities. The obtained results have shown that, depending on the turbulence intensity and the mean wind velocity, there are tower geometric configurations more advantageous from the fatigue load standpoint. Consequently, the presented model can be utilized to define assembly strategies oriented to fatigue damage minimization.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권6호
• /
• pp.1-11
• /
• 2021

국내 대형 SOC 시설물의 노후화가 가속화됨에 따라 시설물 유지관리도 현재 상태 기준의 안전성 평가에서 미래 노후도 수준 예측을 기반으로 한 성능 중심의 예방적·선제적 유지 관리로 전환되고 있다. 특히, 교량의 경우 1·2종 교량은 많은 연구와 함께체계적으로 관리되고 있으나, 중소형 3종 교량은 사용 연한 동안 성능저하를 대변하는 이력 데이터 수집과 활용은 전무한 실정이다. 따라서 본 연구에서는 부재별 외관 손상에 대해 생애주기별 유지관리 이력을 3차원 교량 객체에 등록함으로써 손상 위치의 손상변화율 등을 직관적으로 확인 할 수 있고, API 기반 종합성능평가가 가능하도록 3D 교량모델 기반의 실증 DB시스템을 설계하여 개발하였다.

• Ocean Systems Engineering
• /
• 제12권1호
• /
• pp.87-142
• /
• 2022

An analysis for the computation of Fatigue Damage Index (FDI) under the effects of the various combination of the ocean loads like random waves, current, platform motion and VIV (Vortex Induced Vibration) for a certain design water depth is a critically important part of the analysis and design of the marine riser platform integrated system. Herein, a 'Computer Simulation Model (CSM)' is developed to combine the advantages of the frequency domain and time domain. A case study considering a steel catenary riser operating in 1000 m water depth has been conducted with semi-submersible. The riser is subjected to extreme environmental conditions and static and dynamic response analyses are performed and the Response Amplitude Operators (RAOs) of the offshore platform are computed with the frequency domain solution. Later the frequency domain results are integrated with time domain analysis system for the dynamic analysis in time domain. After that an extensive post processing is done to compute the FDI of the marine riser. In the present paper importance is given to the nature of the current profile and the VIV. At the end we have reported the detail results of the FDI comparison with VIV and without VIV under the linear current velocity and the FDI comparison with linear and power law current velocity with and without VIV. We have also reported the design recommendations for the marine riser in the regions where the higher fatigue damage is observed and the proposed CSM is implemented in industrially used standard soft solution systems (i.e., OrcaFlex^*TM and Ansys AQWA^**TM), Ms-Excel^***TM, and C++ programming language using its object oriented features.

• 환경영향평가
• /
• 제18권5호
• /
• pp.313-319
• /
• 2009

A complex maritime resort combined marina and with course of Korea is required to improve international tourism competitiveness by taking advantage of her environmental favorable circumstances. The development of tourism, however, is focused on land-oriented that incurred lower tourism efficiency and international tourism competitiveness. In addition, the regulation of "Preliminary environmental assessment for golf courses" by the Ministry of Environment is emphasized on land geography and geology that can cause damage of tourist attractions in an island region. In particular, the development of 6th or 7th ridges in mountainous island region within 2km from the sea, that holds scenic and academic value, can go against environment-friendly by geographical and geological damage. According to the regulation for consultation for golf courses and forestry is to preserve regional ecosystem over 6th ridge, but it cannot be applicable to island region because that can form excessive slopes where marine ecosystem is required to be maintained. It, therefore, can be desirable that the development of over 6th ridge in an island region. It is suggested that continuous comparative studies of geographical and geological characteristics between land and island region will be carried on to establish feasible and reasonable development model so that balanced development of land and island, and versatile international environment-friendly maritime resort can be achieved and developed.