• 제목/요약/키워드: Damage Tolerance Design

검색결과 46건 처리시간 0.025초

충격후 잔류압축강도시험에 의한 복합재료 적층판의 설계 (A Design Guide for Composite Laminates by the Compressive after Impact Tests)

  • 정태은;박경하;류정주
    • 대한기계학회논문집
    • /
    • 제19권9호
    • /
    • pp.2105-2113
    • /
    • 1995
  • The compressive tests under impact conditions were performed to establish a design guide for impact damage tolerance. The composition of layup was selected for the real cases of composite aircraft structure. The energy level of visible of visible damage threshold was determined as 7 Joules. It was found that the normalized bending stiffnesses in the direction of closely fixed boundary affected the area of damage. Graphite/epoxy used in the tests exhibited 60% reduction in compression strength at the energy level of visible damage threshold. Wet-conditioned specimens represented 9% reduction in residual compressive strength in comparison with room temperature ambient specimens. In this study, a design factor of 2.1 was proposed for the low velocity impact damage.

복합재 항공구조물의 손상허용평가를 위한 운항수명의 확률적 모델 (Probabilistic Model of Service Life to Evaluate Damage Tolerance of Composite Structure)

  • A.스튜어트;A.우샤코프;심재열;황인희
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2000년도 추계학술발표대회 논문집
    • /
    • pp.245-248
    • /
    • 2000
  • Modern aircraft composite structures are designed using a damage tolerance philosophy. This design philosophy envisions sufficient strength and structural integrity of the aircraft to sustain major damage and to avoid catastrophic failure. The only reasonable way to treat on the same basis all the conditions and uncertainties participating in the design of damage tolerant composite aircraft structures is to use the probability-based approach. Therefore, the model has been developed to assess the probability of structural failure (POSF) and associated risk taking into account the random mechanical loads, random temperature-humidity conditions, conditions causing damages, as well as structural strength variations due to intrinsic strength scatter, manufacturing defects, operational damages, temperature-humidity conditions. The model enables engineers to establish the relationship between static/residual strength safety margins, production quality control requirements, in-service inspection resolution and criteria, and POSF. This make possible to estimate the cost associated with the mentioned factors and to use this cost as overall criterion. The methodology has been programmed into software.

  • PDF

근사모델을 사용한 손상허용해석 (Damage Tolerance Analysis Using Surrogate Model)

  • 장병욱;임재혁;박정선
    • 한국항공우주학회지
    • /
    • 제39권4호
    • /
    • pp.306-313
    • /
    • 2011
  • 항공기 부품에 대한 손상허용해석은 구조적 안전성 및 신뢰성 보장을 위해 면밀히 평가되어야한다. 손상허용기법은 항공기 주구조의 피로 설계기법으로 초기균열의 존재를 고려하여 피로수명을 산정한다. 따라서 손상허용해석에서는 피로 균열성장 수명의 계산이 요구되며, 이를 바탕으로 부품의 점검시간 및 교체주기를 결정한다. 본 논문에서는 형상이 복잡한 터빈 휠에 대하여 손상허용해석을 수행하였다. 형상이 복잡한 구조의 균열성장수명평가 시에는 주요 변수인 응력확대계수의 식을 알기 어려워, 이를 유한요소해석으로 계산하므로 많은 시간이 요구된다. 이러한 문제를 해결하고자 특정 균열길이에 대한 응력확대계수를 유한요소해석으로 계산하고, 생성된 데이터의 회귀분석을 통해 응력확대계수의 근사모델을 생성하였다. 균열성장 수명은 근사모델의 적분으로 계산하였으며, 근사모델을 사용하여 균열성장 수명평가와 손상허용해석의 효율을 높일 수 있었다.

항공기 복합재 구조에 적용된 두꺼운 적층판의 손상 허용 기준 평가 (Investigation on Damage Tolerance of Thick Laminate for Aircraft Composite Structure)

  • 박현범;공창덕;신철진
    • Composites Research
    • /
    • 제25권4호
    • /
    • pp.105-109
    • /
    • 2012
  • 최근 국내에서 미국과 상호항공안전협정 체결을 위한 소형 항공기가 연구 개발 중이다. 연구 대상 항공기는 경량화 하여 연료 절감을 위해 전기체 복합재료가 적용되었다. 그러나 복합재 구조는 외부의 충격 손상에 취약한 구조이다. 따라서 항공기 구조물은 충격 손상에 대한 압축 파손 강도를 고려하여 손상 허용 설계가 반드시 수행되어야 한다. 이는 복합재 구조 항공기 인증에 매우 중요한 요소이다. 본 연구에서는 항공기 복합재 구조에 적용된 두꺼운 적층판에 대한 손상 허용 연구를 수행하였다. 두꺼운 적층판의 세 가지 형태인 손상이 없는 시편, 구멍 손상 및 충격 손상이 적용된 시편의 압축 하중 하에서 손상 허용 기준이 평가되었다.

손상 허용 설계를 적용한 복합재 날개의 정하중 시험 (Static Test of a Composite Wing with Damage Tolerance Design)

  • 박민영
    • 한국항공우주학회지
    • /
    • 제46권6호
    • /
    • pp.471-478
    • /
    • 2018
  • 본 연구에서는 복합재 날개 구조물에 손상허용설계를 적용하고 이를 입증하기 위한 정하중 시험을 수행하였다. 복합재 날개 구조의 정적강도를 입증하기 위하여 5 조건의 설계 제한하중 시험과 3 조건의 설계 극한하중 시험을 수행하였다. 그 다음으로 손상허용 설계를 입증하기 위하여 관련 규정에 따라서 복합재 주익 주요 취약부위에 BVID 10개, Open hole 11개를 생성 후, 설계 극한하중 시험과 파단시험을 실시하였다. 날개 주요 부위의 변위 및 변형률 시험 결과는 구조해석 결과와 비교적 잘 일치하였으며, 파단시험의 최초 파단부위도 최소안전여유를 갖는 부위에서 발생하여 구조해석 모델 및 강도평가 결과가 실제 구조의 정적 거동과 유사함을 확인하였다.

회전익 항공기용 주 로터 작동기에 대한 손상허용 평가 연구 (A Study on Flaw Tolerance Evaluation of a Main Rotor Actuator for Rotorcraft)

  • 박주원;정정래
    • 항공우주시스템공학회지
    • /
    • 제14권spc호
    • /
    • pp.1-6
    • /
    • 2020
  • 미국 연방항공규정(FAR) §29.571 Amendment 55에서 다루고 있는 손상허용 평가 내용은 2012년에 개념 정립이 되었다. 최근 정립된 개념임에 따라 손상허용 평가 개념을 도입하여 입증 절차를 수행한 이력이 많지 않다. 본 논문은 회전익 항공기에서 주요 구조 요소(PSE; Principal Structure Element)로 분류된 주 로터 작동기 개발품을 FAR §29.571 요건의 손상허용 평가를 바탕으로 인증을 위해 수행한 일련의 과정 및 평가 방법들을 소개하고자 한다. 주 로터 작동기는 초기결함을 생성한 후 설계 목표수명의 2배수에 해당하는 손상허용 시험을 수행하였다. 이를 바탕으로 회전익 항공기 주 로터 작동기는 충분한 손상허용능력을 확보하고 있음을 입증하였다.

Al2024의 균열성장거동에 관한 연구 (A Study of Crack Growth Behavior of Al2024)

  • 이원석;이현우
    • 한국정밀공학회지
    • /
    • 제17권10호
    • /
    • pp.49-55
    • /
    • 2000
  • This study describes the fatigue characteristics for Al2024 alloy, which is aircraft structure material. For this work, the plane-strain fracture toughness test, the plane-stress fracture toughness test and the crack growth rates test were conducted under the standard testing method. Test equipment is a computer-controlled closed-loop fatigue testing machine. The data of each test result is very important to aircraft structure reliability estimation, life prediction, design analysis, endurance analysis and damage tolerance analysis. In addition, the fatigue crack growth threshold($\DeltaKth$) value decreased as the stress ratio increased. Also, $\DeltaKth$ decreased as the thickness increased in LT, TL directions.

  • PDF

항공기 피로수명 입증방법 연구 (Study on aircraft fatigue life substantiation method)

  • 김성준;김태욱
    • 한국항공운항학회지
    • /
    • 제24권1호
    • /
    • pp.41-46
    • /
    • 2016
  • This paper reviews and summarizes overall fatigue substantiation method of aircraft. The fatigue substantiation method has been studied using the related regulation and examples of industry application. And the comparisons of fatigue substantiation procedure between safe-life and damage tolerance design have been performed. Fatigue substantiation methods have wide variability depend on design methodology and type of aircraft such as fixed wing and rotorcraft. In this study, fatigue substantiation methodologies have been reviewed using analysis and test methods.

Failure analysis of prestressing steel wires

  • Toribio, J.;Valiente, A.
    • Steel and Composite Structures
    • /
    • 제1권4호
    • /
    • pp.411-426
    • /
    • 2001
  • This paper treats the failure analysis of prestressing steel wires with different kinds of localised damage in the form of a surface defect (crack or notch) or as a mechanical action (transverse loads). From the microscopical point of view, the micromechanisms of fracture are shear dimples (associated with localised plasticity) in the case of the transverse loads and cleavage-like (related to a weakest-link fracture micromechanism) in the case of cracked wires. In the notched geometries the microscopic modes of fracture range from the ductile micro-void coalescence to the brittle cleavage, depending on the stress triaxiality in the vicinity of the notch tip. From the macroscopical point of view, fracture criteria are proposed as design criteria in damage tolerance analyses. The transverse load situation is solved by using an upper bound theorem of limit analysis in plasticity. The case of the cracked wire may be treated using fracture criteria in the framework of linear elastic fracture mechanics on the basis of a previous finite element computation of the stress intensity factor in the cracked cylinder. Notched geometries require the use of elastic-plastic fracture mechanics and numerical analysis of the stress-strain state at the failure situation. A fracture criterion is formulated on the basis of the critical value of the effective or equivalent stress in the Von Mises sense.