• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1596-1601
• /
• 2005

Recently, the probable maximum precipitation (PMP) of dam sites has been greatly increased, compared to that in design, due to a rise in precipitation by abnormal weather, which led to an increase in National interest for dam safety. Therefore, the purpose of this study is to develop a management system of dam safety. The main contents of the first stage($'03{\sim}'04$) of the project consisted of determining the object of management system of dam safety through researched present situation of dam safety management in domestic and reviewing operation for management system of dam safety in abroad. In the second stage($'05{\sim}'06$), the study pursues constructing a basis process of synthetic safety management system through dam safety program and developing a system that can judge dam safety with an improve in reliability of measurement data.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.794-799
• /
• 2006

For various historical reasons and some technical reasons, the safety of dams has been controlled by an engineering standards-based approach, which has developed over many years, initially for the design of new dams, but increasingly applied over the past few decades to assess the safety of existing dams. And some countries were asked for risk assessment on existing dam, which included structural, hydraulic safety of dam and social risk. So, Many countries were developed and could be adapted as an additional tool to assist in decision-making for dam safety management.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.113-120
• /
• 1999

When we design the large rockfill dams the safety of dams against the quake must be considered. Generally pseudostatic analysis method has been used for slope stability and evaluation of safety but the case of dynamic response analysis of earthquake was not in general in Korea. Therefore we need to perform the dynamic response analysis of rockfill dams from these results we analyze the dynamic behavior of dam body such as response displacement and response acceleration. consequently we analyse the selected model of rockfill dam using the FLAC-2D (FDM) program.

• 한국지반환경공학회 논문집
• /
• 제16권8호
• /
• pp.37-43
• /
• 2015

댐 유지관리 측면에서 계측기를 통해 실시간 댐 거동을 파악하고 있으나 노후 댐의 경우 댐 축조 시 설치한 계측기가 오작동하거나 작동되지 않는 경우도 빈번히 발생하고 있다. 1종 국가시설물인 댐은 정밀안전진단을 통해 주기적으로 댐의 상태를 파악하고 있으며, 정밀안전진단 시 댐체의 안정성 평가를 실시하고 있다. 일반적으로 댐 안정성평가 시 가장 큰 단면을 대표단면으로 적용해 2차원 수치해석으로 결론을 도출하고 있으나 최근 많은 연구자들이 3차원 수치해석 프로그램 기술 발달에 기인해 댐 형상, 주변지형 및 댐 하부지형 형상을 정확히 반영한 3차원 수치해석에 관한 연구를 수행하고 있다. 본 연구에서는 지진에 대한 댐 안정성 평가를 위해 지반공학 범용 FEM 해석 프로그램인 PLAXIS 3D를 이용하여 존별 형상을 모두 반영한 댐체의 지진 특성과 댐체를 사력존 하나로 가정한 경우, 댐체를 사력존 및 코어존으로 가정한 경우와 수치해석 결과를 비교 분석하여 존별 형상에 따른 지진파 영향 특성을 분석하고자 한다.

• Water Engineering Research
• /
• 제2권4호
• /
• pp.199-207
• /
• 2001

A computer-assisted desktop is developed for layout design of a concrete gravity dam on the basis of safety and economy. Using a set of regression equations, a dam layout is proposed. With reference to the regression equations and relevant input data, overall dam dimensions are determined by satisfying the stability criteria jointly under usual, unusual, and extreme loading conditions with the desired hydraulic conformity. Among several feasible alternatives, the program enables a designer to select the optimum layout, which corresponds to the minimum total cost of the structure. The method is applied to a case study to examine dimensions of proposed alternatives and to compare them with those of an existing dam.

• 한국농공학회지
• /
• 제45권6호
• /
• pp.109-118
• /
• 2003

As a fundamental research to establish a safety operation plan for irrigation dams, this study presents hydrologic analysis conducted in Sungju Dam watershed based on various rainfall data. Especially those reservoirs without flood control feature are widely exposed to the risk of flooding, a safe and optimized operation program need to be improved against arbitrary flooding. In this study, reservoir routing program was developed and simulated for reservoir runoff estimation using WMS hydrology model. The model simulated the variations of reservoir elevation under the condition of open or closed emergency gate. In case of closed emergency gate, water surface elevation was given as 193.15 m, and this value exceeds the dam crest height by 1.65 m. When the emergency gate is open, the increment of water surface elevation is given as 192.01 m, and this value exceeds dam crest height by 0.57 m. As an alternative plan, dam height increase can be considered for flood control under the PMP (Probable Maximum Precipitation) condition. Since the dam size is relatively small compare to the watershed area, sound protection can be expected from the latter option rather than emergency gate installation.

• 콘크리트학회논문집
• /
• 제19권1호
• /
• pp.11-18
• /
• 2007

댐 안전성 평가를 위한 내진성능평가는 지속적으로 실시하였으나, 댐에서 취약부로 알려진 여수로 피어부에 대한 거동 분석에 대한 연구는 거의 이루어지지 않았다. 실제 지진발생시 여수로 피어가 국부 손상을 받기에 취약한 부분으로 추정되어 본 연구에서 댐의 내진성능 평가를 위한 기초 실험으로서 정적 시험을 수행하였다. 본 연구에서는 댐의 여수로 피어부에 대한 축소된 철근콘크리트 모형을 통한 강도모델을 구성하여 정적 모형 시험을 실시하고, 시험 결과의 분석, 구조해석을 통한 실제 구조물의 거동 및 균열하중, 극한하중에 대한 분석을 실시하였다. 대상 시험체에 대한 모형 시험 결과와 수치해석 결과는 서로 다른 파괴 거동을 나타내어 파괴하중이 서로 다르게 추정되었으나, 모형 시험체의 파괴 거동을 고려하는 경우에는 정적 시험과 해석을 통하여 실제 구조물의 균열 발생 하중과 극한하중을 추정할 수 있는 것으로 사료된다.

• 한국환경과학회지
• /
• 제14권11호
• /
• pp.995-1004
• /
• 2005

As a research establish reservoir safety operation for small dam systems. This study presents hydrologic analysis conducted in the Duckdong and Bomun dam watershed based on various rainfall data and increase inflow. Especially the Duckdong dam without flood control feature are widely exposed to the risk of flooding, thus it is constructed emergency gate at present. In this study reservoir routing program was simulation for basin runoff estimating using HEC-HMS model, the model simulation the reservoir condition of emergency Sate with and without. At the reservoir analysis results is the Duckdong dam average storage decrease $20\%$ with emergency gate than without emergency gate. Also, the Bomun dam is not affected by the Duckdong flood control augmentation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.34-46
• /
• 1991

The slope stabi1ity analyses for Carsington dam were performed by using the computer program STABL and PC-SLOPE. The slip surface predicted by STABL can differ from the true slip surface. This is due to the characteristics of searching technique of the program STABL. Hence various possible potential slip surfaces must be examined using the program STABL. Various methods of analysis are employed in the program PC-SLOPE. A resonable factor of safety can be obtained by comparing the various values, and the potential slip surface can be predicted well relatively. The shear strength parameters of ctitical or residual state must be investigated as well as the peak strength for the case of the Carsington dam, where the deformation took place over long periods.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.103-110
• /
• 2003

A hybrid structural reliability analysis method that integrates a commercial finite element program and a reliability analysis algorithm is proposed to estimate the safety of real structures in this paper. Since finite element method (FEM) is most commonly and widely used in the analysis and design practice of real structures, it appears to be necessary to use general FEM program in the structural reliability analysis. In this case, simple conventional reliability methods cannot be used because the limit state function can only be expressed in an algorithmic form. The response surface method(RSM)-based reliability algorithm with the first-order reliability method (FORM) found to be ideal in this respect and is used in this paper. The intention of use of RSM is to develop, albeit approximately, an explicit expression of the limit state function for real structures. The applicability of the proposed method to real structures is examined with help of the example in consideration of a concrete dam. Both the strength and serviceability limit states are considered in this example.