• 제목/요약/키워드: DV-$X\alpha$

검색결과 35건 처리시간 0.035초

밀도함수 이론법을 이용한 마그네슘 합금의 재료특성 예측에 관한 연구 (A Study on the Prediction of the Material Properties of Magnesium Alloys Using Density Functional Theory Method)

  • 백민숙;원대희;김병일
    • 한국재료학회지
    • /
    • 제17권12호
    • /
    • pp.637-641
    • /
    • 2007
  • The total energy and strength of Mg alloy doped with Al, Ca and Zn, were calculated using the density functional theory. The calculations was performed by two programs; the discrete variational $X{\alpha}\;(DV-X{\alpha})$ method, which is a sort of molecular orbital full potential method; Vienna Ab-initio Simulation Package (VASP), which is a sort of pseudo potential method. The fundamental mixed orbital structure in each energy level near the Fermi level was investigated with simple model using $DV-X{\alpha}$. The optimized crystal structures calculated by VASP were compared to the measured structure. The density of state and the energy levels of dopant elements was discussed in association with properties. When the lattice parameter obtained from this study was compared, it was slightly different from the theoretical value but it was similar to Mk, and we obtained the reliability of data. A parameter Mk obtained by the $DV-X{\alpha}$ method was proportional to electronegativity and inversely proportional to ionic radii. We can predict the mechanical properties because $\Delta{\overline{Mk}}$is proportional to hardness.

DV-X$\alpha$ 분자궤도법을 이용한 CuO 및 Cu_2O$에서의 화학 결합 및 전자상태 (Chemical bonding and electronic state in cuprous and cupric oxide using DV-X$\alpha$ method)

  • 김영하;김양수;한영희;한상철;성태현;노광수
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
    • /
    • pp.220-220
    • /
    • 2003
  • 최근, Cu기판 위에 YBaCuO$_{7-x}$ 초전도체를 입혀 초전도 선재를 제작하려는 연구가 이루어지고 있으며 이 과정에서 CuO와 Cu$_2$O가 생성된다는 보고가 있다. CuO 및 Cu$_2$O의 생성은 초전도 선재의 전기전도적 특성 및 기계적 특성에 상당한 영향을 끼칠 수 있다. 따라서 CuO와 Cu$_2$O에 대한 연구가 필요하다고 할 수 있다. 본 연구에서는 DV-X$\alpha$ 분자궤도법을 통해 CuO와 Cu$_2$O에 대한 (Cu$_{29}$ O$_{58}$ )$^{58-}$ , (Cu$_{52}$ O$_{19}$ )$^{14+}$ 모델을 이용하여 전자상태계산을 하였다. CuO, Cu$_2$O의 valence orbital level 구조 및 DOS (Density of State)를 통해 Cu원자와 O원자간의 공유결합 세기를 측정하였으며 CuO, Cu$_2$O 서로간의 차이점을 분석하였다.

  • PDF

범함수궤도법을 이용하여 계산한 Al, Ga, In이 도핑된 ZnO의 전자상태 (Electronic State of ZnO doped with Al, Ga and In, Calculated by Density Functional Theory)

  • 이동윤;이원재;송재성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
    • /
    • pp.218-221
    • /
    • 2004
  • The electronic state of ZnO doped with Al, Ga and In, which belong to III family elements in periodic table, was calculated using the density functional theory. In this study, the program used for the calculation on theoretical structures of ZnO and doped ZnO was Vienna Ab-initio Simulation Package (VASP), which is a sort of pseudo potential method. The detail of electronic structure was obtained by the describe variational $X{\alpha}(DV-X{\alpha})$(DV-Xa) method, which is a sort of molecular orbital full potential method. The optimized crystal structures obtained by calculations were compared to the measured structure. The density of state and energy levels of dopant elements was shown and discussed in association with properties.

  • PDF

$(Ba, Sr)TiO_3$계 PTCR 세라믹스의 입계산화에 대한 $\mu-AES$ 분석 및 $DV-X\alpha$ 궤도에너지 계산모사 (Analysis of Grain Boundary Oxidation in $(Ba, Sr)TiO_3$-based PTCR Ceramics by $\mu-AES$ and $DV-X\alpha$ Energy Simulation)

  • 김명철;강영석;허수형;박순자
    • 한국세라믹학회지
    • /
    • 제31권6호
    • /
    • pp.587-594
    • /
    • 1994
  • (Ba, Sr)TiO3-based PTCR ceramics were sintered and cooled down with various cooling conditions in the air. AES was applied to investigate the composition change in the grain boundary and bulk area of oxidatively cooled samples. Ba component was deficit in grain boundary region, while oxygen was abundant than bulk region. The discrete changes of oxygen binding energies were confirmed in the grain boundary region of the heavily oxidized samples. It was supposed that the large binding energy shift resulted from the oxidation of the segregated Mn in grain boundary region and this idea was supported by the DV-X$\alpha$ molecular energy simulation.

  • PDF

DV-Xα 분자궤도법을 이용한 리튬이온 흡착제용 스피넬형 망간산화물의 전자상태에 관한 연구 (A Study on Electronic Structures of Spinel-Type Manganese Oxides for Lithium Ion Adsorbent using DV-Xα Molecular Orbital Method)

  • 김양수;정강섭;이재천
    • 한국재료학회지
    • /
    • 제12권4호
    • /
    • pp.274-278
    • /
    • 2002
  • Discrete-variational(DV)-$X{\alpha}$ method was applied to investigate the electronic structures of spinel- type manganese oxide which is well known to the high performance adsorbent or cathode material for lithium ion. The results of DOS(density of states) and Mulliken population analysis showed that Li was nearly fully ionized and interactions between Mn and O were strong covalent bond. The effective charge of Li and Mn was +0.77 and +1.44 respectively and the overlap population between Mn and O was 0.252 in $LiMn_2O_4$. These results from DV-X$\alpha$ method were well coincided with the experimental result by XPS analysis and supported the feasibility of theoretical interpretation for the $LiMn_2O_4$ compound.

DV-Xα분자궤도법을 이용한 Zn alloy의 기계적 성질 예측 (A study on the prediction of the mechanical properties of Zinc alloys using DV-Xα Molecular Orbital Method)

  • 나혜성;공종판;김양수;강정윤
    • 한국재료학회지
    • /
    • 제17권5호
    • /
    • pp.250-255
    • /
    • 2007
  • The alloying effects on the electronic structures of Zinc are investigated using the relativistic $DV-X{\alpha}molecular$ orbital method in order to obtain useful information for alloy design. A new parameter which is the d obital energy level(Md) and the bonder order(Bo) of alloying elements in Zinc was introduced and used for prediction of the mechanical properties. The Md correlated with the atomic radius and the electronegativity of elements. The Bo is a measure of the strength of the covalent bond between M and X atoms. First-principles calculations of electronic structures were performed with a series of models composed of a MZn18 cluster and the electronic states were calculated by the discrete variational- $X{\alpha}method$ by using the program code SCAT. The central Zinc atom(M) in the cluster was replaced by various alloying elements. In this study energy level structures of pure Zinc and alloyed Zinc were calculated. From calculated results of energy level structures in MZn18 cluster, We found Md and Bo values for various elements of Zn. In this work, Md and Bo values correlated to the tensile strength for the Zn. These results will give some guide to design of zinc based alloys for high temperature applications and it is possible the excellent alloys design.