• Title/Summary/Keyword: DUT

Search Result 84, Processing Time 0.026 seconds

Experimental Verification of Multipactor Sensitivity for S-band Diplexer (S 대역 Diplexer에 대한 Multipactor 민감도 시험)

  • Choi, Seung-Woon;Kim, Day-Young;Kwon, Ki-Ho;Lee, Yun-Ki
    • Aerospace Engineering and Technology
    • /
    • v.6 no.1
    • /
    • pp.83-91
    • /
    • 2007
  • An experimental verification of multipactor(MP) discharge for S-band diplexer as a sample DUT for space application by an in-house MP test facility is proposed. The designed diplexer having two BPFs for Rx and Tx is applied to a design of five pole inter-digital cavity type band pass filter with chebyshev response, it has 2.7 % bandwidth centered at 2.232 and 2.055 GHz for Rx, Tx, respectively. To avoid the MP discharge, the accurate design and analysis methods based on 3D EM field analysis are considered. The proposed in-house MP test facility consists of a phase detecting system using a doubly balanced mixer as a simple, low cost and real time MP test method compared with results of previously well-known MP detection systems as cross reference methods. The calculated MP threshold RF input power is 43.13 dBm. The measured one is 43 dBm and 44 dBm for CW, pulsed mode test, respectively.

  • PDF

Implementation of a High Speed Comparator for High Speed Automatic Test Equipment (고속 자동 테스트 장비용 비교기 구현)

  • Cho, In-Su;Lim, Shin-Il
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.19 no.3
    • /
    • pp.1-7
    • /
    • 2014
  • This paper describes the implementation of high speed comparator for the ATE (automatic test equipment) system. The comparator block is composed of continuous comparator, differential difference amplifier(DDA) and output stage. For the wide input dynamic range of 0V to 5V, and for the high speed operation (1~800MHz), high speed rail-to-rail amplifier is used in the first stage. And hysteresis circuits, pre-amp and latch are followed for high speed operation. To measure the difference of output signals between the two devices under test (DUTs), a DDA is applied because it can detect the differences of both common signals and differential signals. This comparator chip was implemented with $0.18{\mu}m$ BCDMOS process and can compare the signal difference of 5mV up to the frequency range of 800 MHz. The chip area of the comparator is $620{\mu}m{\times}830{\mu}m$.

Design of a RF fixed phase control circuit using I&Q Demodulator (I&Q Demodulator를 이용한 RF 고정 위상 제어기 설계)

  • Park, Ung-Hee;Chang, Ik-Soo;Huh, Jun-Won;Gang, In-Ho
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.36D no.1
    • /
    • pp.8-14
    • /
    • 1999
  • The active devices used at microwave frequency have the different phase shift according to input power. Especially, The difference of the phase shift is large in the saturation region of the amplifier. In this paper, we disigned the phase control system for fixing the different phase shift at device. With the high frequency nonlinear amplifier, we fabricated such system that the phase shift to be fixed automatically using the varible phase shifter. The variable phase shifter fixed total phase variation of the circuit using the information that was obtained from the comparison of imputsignal phase with output signal phase. Even though the input signal is 2-tone or FM type, we could estimate and also fix the phase variation on DUT Dynamic range is about 10dB. It has been experimented at 1960MHz using Teflon (H=31mil, ${\varepsilon}r$=3.2)

  • PDF

An Experimental Study on the Performance and Emission Characteristics with Hydrogen Enrichment in a CNG Engine (수소첨가 CNG기관의 성능 및 배출가스 특성에 관한 실험적 연구)

  • Ryu, Kyuhyun;Kim, Ingu
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.26 no.2
    • /
    • pp.164-169
    • /
    • 2015
  • Recent research has focused on alternative fuel to improve engine performance and to comply with emission regulation. Finding an alternative fuel and reducing environment pollution are the main goals for future internal combustion engines. The purpose of this study is to obtain low-emission and high-efficiency by hydrogen enriched CNG fuel in SI engine and is to clarify the effects of hydrogen enrichment in CNG fuelled engine on exhaust emission and performance. An experimental study was carried out to obtain fundamental data for performance and emission characteristics of hydrogen enrichment in SI engine. The experiment was conducted at 2500 rpm, bmep 2 bar, 4 bar conditions while CNG fuel was mixed with 10, 20 and 30% hydrogen blends. From the experimental results, combustion duration was shortened due to rapid flame propagation velocity of hydrogen and these were attributed to the burning velocity increasing exponentially with increasing hydrogen blending ratio. Hydrogen has much wider flammable limit than methane, gasoline and the minimum ignition energy is about an order of magnitude lower than for other combustion. By adding hydrogen, $CO_2$ and HC were reduced. However, $NO_X$ was increased dut to high rate of heat release for hydrogen substitutions.

Effects of Mixture of Bambusae Caulis in Liquamen and Bamboo Extract on the Regional Cerebral Blood Flow and Mean Blood Pressure in Rats (대나무 추출액과 죽력의 혼합물이 국소 뇌혈류량 및 평균 혈압에 미치는 영향)

  • Kim, Cheon-Joong;Jang, Kyeong-Seon;Cho, Su-In;Kim, Gye-Yeop;Jeong, Hyun-Woo
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.20 no.3
    • /
    • pp.575-580
    • /
    • 2006
  • This Study was designed to investigate the effects of Mixture of Bambusae Caulis in Liquamen and Bamboo Extract on the change of regional cerebral blood flow (rCBF) and mean arterial blood pressure (MABP) in normal and cerebral ischemic rats. Experimental materials were as follows ; BE- 1 was Bamboo Extract (BE) extracted with 70% ethyl alcohol, BE-11 was BE extracted with distilled water at $121^{\circ}C$ for 30 min, BE-111 was BE extracted with distilled water at $121^{\circ}C$ for 3 hrs, MLC was mixture of Bambusae Caulis in Liquamen (BCL) and BE-111 mixed at the ratio of 1 to 100 (MLC100), 1 to 50 (MLC50), 1 to 20 (MLC20), 1 to 10 (MLC10), 1 to 5 (MLC5). The results were as follows , The Changes of BE- 1 on the rCBF and MABP in normal rats were not showed, BE- 11 significantly decreased rCBF in a dose-dependent manner Dut increased MABP in a dose-dependent manner. BE-111 increased rCBF in a dose-dependent manner, MLC significantly increased rCBF in a dose-dependent manner and increased MABP in a dose-dependent manner. rCBF was significantly and stably increased by MLC5 (1 mg/kg, i.p.) during the period of cerebral reperfusion, which contrasted with the findings of rapid and marked increase in control group. As results above ; The present author thought that BE- 111 and MLC increased rCBF by dilating pial arterial diameter.

Effect of Sopung-san on Contact Hypersensitivity induced by Repeat Elicitation of DNCB (소풍산물추출물이 DNCB로 유발된 접촉성피부염에 미치는 영향)

  • Park, Sook-Jahr;Lee, Sang-Gon;Baek, Jung-Han;Byun, Sung-Hui;Kim, Sang-Chan
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.20 no.3
    • /
    • pp.623-628
    • /
    • 2006
  • Sopung-san(SPS; prescription No. DO27), a herbal medicine prescribed by oriental hospital of Daegu fanny University, has been used as cure for pruritus and psoriasis. To evaluate anti-inflammatory effect of Sopung-san, we treated Sopung-san extract in animal model system induced contact hypersensitivity. Contact hypersensitivity, a local inflammatory response of the skin, was induced by 1% DNCB on the right ear of BALB/C mouse. Sopung-san was prepared as water extract and administrated everyday for 2 weeks per oral. A right ear of mouse was potently swelled by 1% of DNCB treatment, but a mouse ear thickness was significantly reduced by Sopung-san after 2 weeks. treatment. Sopung-san reduced IgG in serum obtained from blood of 1 % DNCB-treated mouse. IgE in serum was not changed by DNCB and/or Sopung-san treatment. $IL-1{\beta}$ and IL-6 from ear tissue were significantly increased by DNCB, Dut were not reduced by Sopung-san. From these results, anti-inflammatory effect of Sopung-san, especially reduction of ear swelling, might be partly due to reduction of IgG in serum.

Gene Expression Profiling of Doxifluridine Treated Liver, Small and Large Intestine in Cynomolgus (Macaca fascicularis) Monkeys

  • Jeong, Sun-Young;Park, Han-Jin;Oh, Jung-Hwa;Kim, Choong-Yong;Yoon, Seok-Joo
    • Molecular & Cellular Toxicology
    • /
    • v.3 no.2
    • /
    • pp.137-144
    • /
    • 2007
  • The mechanism of cytotoxicity of doxifluridine, a prodrug fluorouracil (5-FU), has been ascribed to the misincorporation of fluoropyrimidine into RNA and DNA and to the inhibition of the nucleotide synthetic enzyme thymidylate synthase. Increased understanding of the mechanism of 5-FU has led to the development of strategies that increases its anticancer activity or predicts its sensitivity to patients. Using GeneChip?? Rhesus Macaque Genome arrays, we analyzed gene expression profiles of doxifluridine after two weeks repeated administration in cynomolgus monkey. Kegg pathway analysis suggested that cytoskeletal rearrangement and cell adhesion remodeling were commonly occurred in colon, jejunum, and liver. However, expression of genes encoding extracellular matrix was distinguished colon from others. In colon, COL6A2, COL18A1, ELN, and LAMA5 were over-expressed. In contrast, genes included in same category were down-regulated in jejunum and liver. Interestingly, MMP7 and TIMP1, the key enzymes responsible for ECM regulation, were overexpressed in colon. Several studies were reported that both gene reduced cell sensitivity to chemotherapy-induced apoptosis. Therefore, we suggest they have potential as target for modulation of 5-FU action. In addition, the expression of genes which have been previously known to involve in 5-FU pathway, were examined in three organs. Particularly, there were more remarkable changes in colon than in others. In colon, ECGF1, DYPD, TYMS, DHFR, FPGS, DUT, BCL2, BAX, and BAK1 except CAD were expressed in the direction that was good response to doxifluridine. These results may provide that colon is a prominent target of doxifluridine and transcriptional profiling is useful to find new targets affecting the response to the drug.

Side-scan sonar survey in the Pechora Sea, Russian Arctic (북극 페초라해의 Side-scan Sonar 해저면 음향영상)

  • Jin, Young-Keun;Chung, Kyung-Ho;Kim, Yea-Dong;Lee, Joo-Han
    • Journal of the Korean Geophysical Society
    • /
    • v.8 no.4
    • /
    • pp.187-194
    • /
    • 2005
  • As a study of Arctic marine survey project, Side-scan sonar survey was carried out in the Pechora Sea belonging to the southeaster part of Barents Sea. The study area is a shallow sea 11 m-16 m deep with recent sediments of rich organic carbon. Side-scan sonar profiles show large-scale marine plant communities 2-3 m wide covering the southeastern area. A lot of lineaments are traced on the seafloor in the central and northern area. The major trends of the lineaments are 220°and 290°(WSW-ENE and WNW-ESE). This trends is thought to be a main path of icebergs. Pockmarks on the seafloor are locally distributed in the area, which are formed by fluid and/or gas discharge. These would be related with petroleum/gas system well developed around the study area. Dut to weak appearances and limited distribution of the pockmarks, more detailed studies are necessary to examine their nature and structure.

  • PDF

Phase Error Accumulation Methodology for On-chip Cell Characterization (온 칩 셀 특성을 위한 위상 오차 축적 기법)

  • Kang, Chang-Soo;Im, In-Ho
    • 전자공학회논문지 IE
    • /
    • v.48 no.2
    • /
    • pp.6-11
    • /
    • 2011
  • This paper describes the design of new method of propagation delay measurement in micro and nanostructures during characterization of ASIC standard library cell. Providing more accuracy timing information about library cell (NOR, AND, XOR, etc.) to the design team we can improve a quality of timing analysis inside of ASIC design flow process. Also, this information could be very useful for semiconductor foundry team to make correction in technology process. By comparison of the propagation delay in the CMOS element and result of analog SPICE simulation, we can make assumptions about accuracy and quality of the transistor's parameters. Physical implementation of phase error accumulation method(PHEAM) can be easy integrated at the same chip as close as possible to the device under test(DUT). It was implemented as digital IP core for semiconductor manufacturing process($0.11{\mu}m$, GL130SB). Specialized method helps to observe the propagation time delay in one element of the standard-cell library with up-to picoseconds accuracy and less. Thus, the special useful solutions for VLSI schematic-to-parameters extraction (STPE), basic cell layout verification, design simulation and verification are announced.

Implementation of Intelligent Measurement System of InterModulation Distorted RF Signals (지능형 누설왜곡전파신호 측정시스템 개발)

  • Kim, Dong-hyeon;Seo, Na-Hyeon;Park, Ki-Won;Rhee, Young-Chul
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.27 no.2
    • /
    • pp.144-149
    • /
    • 2017
  • In this paper, we developed an intelligent and wideband RF-receiver module to represent a high dynamic range and good linearity characteristics up to 650MHz-2700MHz frequency band. and implemented an intelligent digital-RF- distorted signal measuring system for the RF distortion (intermodulation) signals. Broadband RF-receive module was designed to represent the optimized linear parameters of the receiver to meet the low noise and wide dynamic range. The designed intelligent digital-distortion(intermodulation) signal measument system measured by applying the 1MHz IF of third intermodulation signal of DUT and Measured data was recorded by program on the PC monitor with GUI interface. By variable up to 650MHz-2700MHz measured data showed up to -127.8dBc to -138dBc of the distortion (intermodulation) signal. And developed intelligent digital- distortion signal measurement system can be used to measure intermodulation distortion signal of wireless system widely.