• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.9
• /
• pp.21-28
• /
• 2001

The economical detection of dual-tone multi-frequency(DTMF) signals is an important factor when developing cost-effective telecommunication equipment. Each chanel has independently a DTMF receiver, and it informs the detected signal to processors. In order to detect the DTMF signals, the receiver use algorithm such DFT, FFT and Goertzel methods. This paper analyze the power spectra of the DTMF receiver by using the QFT algorithm. As experimental results, it show that can the improved performance of the DTMF receiver and can reduce memory waste and the real time processing.

• The Journal of the Acoustical Society of Korea
• /
• v.5 no.2
• /
• pp.19-28
• /
• 1986

DSP LSE을 이용하여 디지털 DTMF 수신기를 구현하는 방법으로는 IIR 디지털 필터, Counter 방법, DFT 방법, FFT 방법 및 PARCOR 방법등이 제안되어 왔다. 그 중에서도 IIR 디지털 필터를 이용 한 방법은 기존의 아나로그 DTME 수신기를 그대로 디지털화 한 것이기 때문에 성능이 제일 우수한 것 으로 알려져 있다. 그러나 IIR 디지털 필터를 이용하여 그것을 구현할 때 필터의 계수, roundoff 잡음, overflow 등 고려해야 할 사항이 많다. 본 논문에서는 이러한 문제점들을 해결하면서 CCITT 사양들을 만족하는 디지털 DTMF 수신기 구현에 관한 연구결과를 제시하였다. DSP LSI을 이용해서 수신기를 hardware 제작할 때 이 결과들을 수정없이 이용할 수 있다고 기대된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.133-139
• /
• 2001

The economical detection of dual-tone multi-frequency(DTMF) signals is an important factor when developing cost-effective telecommunication equipment. Each channel has independently a DTMF receiver, and it informs the detected signal to processors. In order to detect the DTMF signals, this paper analyze the power spectra of the DTMF receiver by using the QFT algorithm. As experimental result, by analyzing 2$\^$M/ real data in terms of ITU-T specification, it show that the QFT algorithm improve the performance of the DTMF receiver and can save memory waste and can the real-time processing.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.8-13
• /
• 2006

In this thesis, an automatic door lock system using a dual tone multiple frequency(DTMF) signal generated as pushing the key button of mobile phone is proposed and implemented. This system consists of a transmitter module and a receiver module for processing the DTMF signal of mobile phone. The DTMF signal of mobile phone connected with ear-phone jack enter into the input terminal of DTMF receiver and those are encoded by a code-converter with 4-bits binary format in the DTMF receiver. The encoded output signals are transmitted to the amplitude shift keying(ASK) modulator of transmitter module and the modulated ASK signals which are converted into radio frequency(RF) signals propagate in a free space. The RF signals passed through a free space are demodulated by the ASK demodulator of receiver module and the demodulated ASK signals are sent to a micro-controller unit(MCU). The output signals processed by the MCU are compared with the secreted identification number which is prerecorded in a microprocessor and are transferred to a power relay. If the result is the same, the automatic door lock system opens a door. In the opposite case, it maintains closing the door. The implemented automatic door lock system operates well in mobile environments.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.110-116
• /
• 1996

In this paper a novel method improving the accuracy of DTMF tone reception in ARS system is proposed. ARS system should allow users to generate DTMF signals while it is sending voice guidance. It is not unocmmon, in this case, that a portion of transmitting voice signals cross-talks to the receiving channel and it often results in interfering with the receiving DTMF signals. Serious degradations including DTMF tone missing, false alarm and so forth have been introduced for the above reason. To overcome this phenomena, we have proposed a way eliminating the frequency spectra representing DTMF signals bands from the transmitting voice signal by using notch filters. This method also employs bandpass filters of which the frequency responses are reciprocal to those of the notch filters incorporated with the DTMF receiver. It is shown that a drastic improvement has been achieved with respect to the DTMF tone detection with little deterioration of voice guidance quality.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.26-32
• /
• 1997

The economical detection of dulal-tone multifrequency(DTMF) signals is an important factor when developing cost-effective telecommunication equipment. Each channel have independently a DTMF receiver, and it informs the detected signal to processors of the TDX. This paper proposes the linear prediction algorithm for the spectrum analysis. As a experimental resutls, it can obtain the improved performance to the DTMF receivers and reduce the real-time processing and memory waste.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.2
• /
• pp.196-200
• /
• 1987

The following methods are proposed for implementing digital dual tone multi-frequency (DTMF) receiver: using infinite impulse response(IIR) digital filters, period-counting algorithm, discrete Fourier transform(DFT), and fast Fourier transform(FFT)[2]. The PARCOR(Partical Correlation) analysis method which has been widly used in the speech signal processing area is applied to the dual tone multi-frequency(DTMF) signal detection. This method is easy to implement digitally and stronger to digit simulation of speech than any other methods proposed up to date. Since sampling rate of 4KHz is used in the DTMF receiver for the detection of input DTMF signal originally sampled at 8KHz, it effects two times higher multiplexing efficiency.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.10
• /
• pp.21-31
• /
• 1994

This paper describes the multichannel combined R2MFC/DTMF/CCT reciver which provides a signaling service functions for call processing control in digital switching system. Using the TMS320C25 DSP chip, we have implemented multi-function receriver shich processes 8 channels of R2MFC, DTMF, and CCT signals simultaneously. In order to increase the channel multiplicity of the combined receiver. R2MFC and CCT receiver were employed by discrete Fourier transform(DFT) method using Goertzel algorithm, and DTMFreceiver was employ by infinite impulse reponse(IIR) filtering method using 4KHz subsampling technique. The combined receiver has 4 function modes for each channel such as R2MFC, DTMF, CCT, and Idle modes. The function mode of each channel may be selected at any time by single-chip micro-controller(.mu.C). Hence, the number of channels assigned for each function mode can be adjusted dynamically according to the signaling traffic variations. From the experimental test results using the test-bed, it has been proved that the combined receiver statisfies all receiver satisfies all receiver specifications, and provides good channel multiplicity and performance, Therefore, it may give a great improvement than existing receiver in cost, reliability, availability, and serviceability.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.4
• /
• pp.1-6
• /
• 1984

An algorithm for the implementation of R2 MFC digital receiver is evaluated using simulated data. The algorithms satisfy the CCITT recommendations. In this paper, our aim is to provide more efficient way of decoding an input in PCM format and detecting the frequency components. The digital signal processor chip (S2811) is suggested to meet these aims Through the software simulation using an Altair 8800b microcomputer, the proposed receiver is shown to have tolerable performance in spite of a given noise, frequency drift, and twist.

• ETRI Journal
• /
• v.9 no.3
• /
• pp.74-85
• /
• 1987

In this paper, a new kind of dual tone multifrequency receiver(DTMFR) is proposed, in which detection is made in terms of the partial correlation(PARCOR) coefficients for efficient DTMF signal detection against both temporary decoding errors by crosstalks possibly coming from adjoint telephone lines during transmission and so-called digit simulation by background voice or noise signals during interdigit period. A simulation study on the behaviour of PARCOR coefficients for tone signals and non-signals has been performed in order to provide the rationale on the feasibility of the proposed DTMFR algorithm. Based upon simulation results, a more refined detection strategy as an example is presented and explained together with the corresponding decision logic.