• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2020

Open pit mines for limestone mining require rapid development of technologies and efforts to prevent safety accidents due to rapid deterioration of the slope due to deforestation and rapid changes in the topography. Accurate three-dimensional spatial information on the terrain should be the basis for reducing environmental degradation and safe development of open pit mines. Therefore, this study constructed spatial information about open pit mine using UAV(Unmanned Aerial Vehicle) and analyzed its utility. images and 3D laser scan data were acquired using UAV, and digital surface model, digital elevation model and ortho image were generated through data processing. DSM(Digital Surface Model) and ortho image were constructed using image obtained from UAV. Trees were removed using 3D laser scan data and numerical elevation models were produced. As a result of the accuracy analysis compared with the check points, the accuracy of the digital surface model and the digital elevation model was about 11cm and 8cm, respectively. The use of three-dimensional geospatial information in the mineral resource development field will greatly contribute to effective mine management and prevention of safety accidents.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.335-339
• /
• 2005

Digital elevation models(DEM) were generated from SPOT-5 HRG supermode imagery through photogrammetric processing. The reference DEMs were obtained from digital topographic maps of 1/5000 scaleas for analyzing the accuracy of the generated DEMs. The DEMs extracted from HRG stereo image data were compared with digital topograpic map DEMs on several test sections. And digital surface models(DSM) and 3D building model was produced.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.5
• /
• pp.389-395
• /
• 2019

Unlike aerial images covering small region, satellite data show high potential to detect urban scale geospatial changes. The change detection using satellite images can be carried out using single image or stereo images. The single image approach is based on radiometric differences between two images of different times. It has limitations to detect building level changes when the significant occlusion and relief displacement appear in the images. In contrast, stereo satellite data can be used to generate DSM (Digital Surface Model) that contain information of relief-corrected objects. Therefore, they have high potential for the object change detection. Therefore, we carried out a study for the change detection over an urban area using stereo satellite data of two different times. First, the RPC correction was performed for two DSMs generation via stereo image matching. Then, D-DSM (Differential DSM) was generated by differentiating two DSMs. The D-DSM was used for the topographic change detection and the performance was checked by applying different height thresholds to D-DSM.

• Journal of the Korean Geophysical Society
• /
• v.8 no.1
• /
• pp.23-33
• /
• 2005

The digital surface model (DSM) is used for several purposes in photogrammetry, remote sensing and laser scanned data such as orthoimage production, contours erivation, extraction of height information. Creation of a surface model from point-clouds (3-D sparse points) that can be derived from stereo imagery and range data (e.g. laser scanned data) can be done with several mathematical interpolation models. In this paper, thin-plate-spline (TPS) is used for digital surface modeling. Determination of suitable weight is an important problem in thin-plate function for a surface. The Voronoi algorithm has been proposed as a method for determination of the weight in thin-plate-spline. In this paper, methods has been tested for different surfaces. The results show that thin-plate-spline can be independent of weight.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.173-178
• /
• 2004

This paper presents photogrammetric processing to generate digital elevation models and deals with the accuracy potential of SPOT-5 HRG supermode imagery for DEM generation. The DEMs obtained from digital topographic maps of 1/5000 scale were used as the refernce DEM data. DEMs extracted from HRG dats were compared with digital topograpic map DEMs on severed test sections. And digital surface model(DSM), refering to above the ground like buildings, was produced about the test built-up area.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.447-456
• /
• 2020

The study area is a slope in Dogye-eup, Samcheok-si, Gangwon-do. The cutting method was applied to this slope for stabilization in 2009 due to the influence of the waste-rock dump located at the top of slope. Recently, soil cracks and creep have occurred on this slope, and the drainage channel was damaged. Therefore, it was analyzed the topography change through photogrammetry using a UAV. Orthophotos were taken in April and October 2019 respectively. From the Orthophots, Digital Surface Model (DSM) was extracted. Time series analysis was performed by comparing each DSM. The topography of October was pushed forward while maintaining the topography of April. Through these features, it is judged that the soil creep is occurring in this study area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.321-321
• /
• 2022

유역 모델링은 유역에 강우의 유출 과정을 재현할 수 있는 과정이다. 과거 유역 모델링은 1차원 수준에서 유출과정을 모의하는데 그쳤으나, 기술이 발전함에 있어 입력하는 매개변수 수가 증가함에 따라 모의값의 신뢰성이 높아지고 있다. 본 연구에서는 다양한 매개변수 중 공간매개변수로써 널리 활용되고 있는 수치표고모델의 신뢰성과 범용성을 확인하고자 한다. 유역모델링 연구에 있어, 수치표고모델 정확성은 결과값의 신뢰성을 좌우하는 중요한 인자 중 하나이다. 수치표고모델이란 실제 지형이 나타내는 표고 정보를 수치화 하여 격자 안에 담은 형태의 파일로 대표적으로 DEM(Digital Elevation Models)과 DSM(Digital Surface Models)로 나눌 수 있다 DEM의 경우 해당 지형의 고도정보만을 담고있으며, DSM은 지표면 상의 나무, 건물 등 포함한 지표면의 고도를 담고 있다. 현재 NASA에서는 전 지구의 30m격자 크기로 SRTM-DSM을 제공하고 있으며, 우리나라 국토지리정보원에서도 90m 격자크기의 DEM을 제공하고 있다. 본 연구에서는 남한강 유역의 수치표고모델을 세 가지 Case로 나눠서 유출량 변화 검토를 진행하였다. 산지가 많은 남한강 유역의 10개의 소유역을 선정하였고, 다음과 같이 3개의 Case를 적용하였다. Case1, DEM 자료를 입력했을 경우, Case2, DSM 자료를 입력했을 경우, Case3 DSM+DEM 자료를 입력했을 경우, 각 Case에 대해 유출량을 산정하였고, 그 결과값을 분석하였다. 해당 유역에 세 가지 Case 모두 유출량의 변화량의 큰 차이를 보이지 않았으며, 공간매개변수 적용에 있어 타당성을 보였다. 따라서 본 연구는 인공위성을 통해 산출된 수치표고모델의 신뢰성을 확인 하였고, 활용가능성을 검토 하였다. 이에 따라 향후 연구에 수치표고모델 적용에 있어 미계측유역에도 활용가능한 연구로 기여할 수 있을 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1D
• /
• pp.89-94
• /
• 2012

The RFM (Rational Function Model), as an alternative to physical sensor models has been widely used for photogrammetric processing of high resolution optical satellite imagery. However, the application of RF modeling to the SAR (Synthetic Aperture Radar) is very limited. In this paper, stereo radargrammetric processing of TerraSAR-X stereo pairs with RFM is implemented and analyzed. The investigation has shown that the accuracy of TerraSAR-X DSM is similar to that of the commercial S/W product. Finally, it is demonstrated that RFM is effective and feasible in the application to the radargrammetric SAR image processing.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.5
• /
• pp.389-397
• /
• 2006

The purpose of the present paper is to offer an analysis of LiDAR data processing and three dimensional terrain for Geographic Information System (CIS) applications. Generally, LiDAR survey is the method which obtains quantitative and qualitative information of the terrain using airborne laser scanning (ALS). We will get a most topographic data at a Triangular Irregular Network (TIN), Digital Surface Model (DSM) and Digital Elevation Model (DEM) using LiDAR data. We examined many factors such as visibility, hillshade, aspect and slope using DEM and DSM. The analyzing results obtained from each item are thought to be regarded as leading factors in the terrain analysis. It is to be hoped that LiDAR survey will contribute a new approach to the terrain analysis.

• Korean Journal of Remote Sensing
• /
• v.31 no.2
• /
• pp.183-191
• /
• 2015

If the damage analysis on river-side facilities such as dam, river bank structures and bridges caused by disasters such as typhoon, flood, etc. becomes available, it can be a great help for disaster recovery and decision-making. In this research, We tried to extract a Digital Surface Model (DSM) and analyze the accuracy from Unmanned Air Vehicle (UAV) images on river-side facilities. We tried to apply stereo image-based matching technique, then extracted match results were united with one mosaic DSM. The accuracy was verified compared with a DSM derived from LIDAR data. Overall accuracy was around 3m of absolute and root mean square error. As an analysis result, we confirmed that exterior orientation parameters exerted an influence to DSM accuracy. For more accurate DSM generation, accurate EO parameters are necessary and effective interpolation and post process technique needs to be developed. And the damage analysis simulation with DSM has to be performed in the future.