• ETRI Journal
• /
• 제37권1호
• /
• pp.26-31
• /
• 2015

Axial-ratio (AR) bandwidth enhancement is achieved for a circularly polarized (CP) cylindrical dielectric resonator antenna (DRA) using a wideband hybrid coupler (WHC) combined with dual probe feed. The presented WHC, comprised of a Wilkinson power divider and a wideband $90^{\circ}$ shifter, delivers good characteristics in terms of 3 dB power splitting and consistent $90^{\circ}$ (${\pm}5^{\circ}$) phase shifting over a wide bandwidth. In turn, the proposed CP DRA, for the employment of the WHC, in place of conventional designs, provides a significant enhancement on AR bandwidth and impedance matching. The antenna prototype with the WHC exhibits a 3 dB AR bandwidth of 48.66%, an impedance bandwidth of 52.5% for voltage standing wave ratio (VSWR) ${\leq}2$, and a bandwidth of 44.66% for a gain of no less than 3 dBi. Experiments demonstrate that the proposed WHC is suitable for broadband CP DRA design.

• Journal of Astronomy and Space Sciences
• /
• 제34권1호
• /
• pp.37-44
• /
• 2017

In this paper, analysis results of the photometric data of DO Dra will be presented. DO Dra had been observed with 1 m LOAO telescope and 0.6 m CBNUO telescope from 2005 through 2014. The data shows kind of periodic oscillation behavior in the orbital period and also in the spin period. It has been found that these QPOs are not observed always and that the periods vary from 30 min to 80 min. We also found that the period variation seems to repeat itself with the period of 13.5 days. It is essential to monitor this object in the future as well as to carry out model calculation in order to have better understanding of these QPO phenomena.

• ETRI Journal
• /
• 제31권1호
• /
• pp.74-76
• /
• 2009

A new feeding method for the circular polarization (CP) dielectric resonator antenna (DRA) is proposed in this letter. Two orthogonal modes (${TE^x}_{{\delta}11}$, ${TE^y}_{1{\delta}1$) of the rectangular DRA are excited by a $90^{\circ}$ phase difference of the differential and common modes currents of the proposed feeding structure. To demonstrate the good CP performance of the proposed method, a right-hand CP DRA for a global positioning system was designed. The impedance bandwidth of the proposed antenna for $S_{11}$ < -10 dB and 3 dB axial ratio bandwidth are about 5.4% and 1.95% at 1.57 GHz, respectively.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1705-1711
• /
• 2017

This paper analyzes the impact of DRA (Demand Response Aggregator) on market power when competing with power generation companies (Gencos) in the electricity market. If congestion occurs in the transmission line, the strategic choice of the power generation company increases exercise of market power. DRA's strategic reduction of power load impacts the strategy of Gencos, which in turn affects the outcome of the load reduction. As the strategy of Gencos changes according to the location of the congested transmission line, the impact on the market depends on the relative location of the congested line and the DRA.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.126-133
• /
• 2023

Recent advancements in cloud service virtualization technologies have witnessed a shift from a Virtual Machine-centric approach to a container-centric paradigm, offering advantages such as faster deployment and enhanced portability. Container orchestration has emerged as a key technology for efficient management and scheduling of these containers. However, with the increasing complexity and diversity of heterogeneous workloads and service types, resource scheduling has become a challenging task. Various research endeavors are underway to address the challenges posed by diverse workloads and services. Yet, a systematic approach to container orchestration for effective cloud management has not been clearly defined. This paper proposes the DRA-Engine (Dynamic Resource Allocation Engine) for resource scheduling in container orchestration. The proposed engine comprises the Request Load Procedure, Required Resource Measurement Procedure, and Resource Provision Decision Procedure. Through these components, the DRA-Engine dynamically allocates resources according to the application's requirements, presenting a solution to the challenges of resource scheduling in container orchestration.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권4호
• /
• pp.270-278
• /
• 2005

재생골재 콘크리트의 강도 및 내구성은 천연골재를 사용한 콘크리트에 비하여 저하되므로 메타카올린을 사용하여 재생골재 콘크리트의 성질을 개선하였다.메타카올린의 주성분은 $SiO_2$ 및 $Al_2O_3$이며, 비표면적은 보통시멘트보다 약 9배 정도 크다. 실콘크리트 구조물에서 얻어진 재생골재(DRA)는 KS F 2573의 1종을 만족하였으나, 콘크리트를 제작하여 얻어진 재생골재(SRA)는 KS F 2573의 2종을 만족하지 않았다. 메타카올린을 시멘트 중량에 20% 대체한 경우, SRA 및 DRA를 사용한 콘크리트의 압축강도는 기준콘크리트에 비하여 약 40~64% 정도 크게 나타났다. 메타카올린을 20% 혼합하므로써 재생골재 콘크리트의 흡수율은 메타카올린을 혼합하지 않은 콘크리트에 비하여 약 2% 감소하였다. 또한, DRA를 사용한 콘크리트의 동결 융해 저항성은 메타카올린의 역할로 현저히 향상되었다. 그러나, 메타카올린을 20% 혼합하고 SRA를 사용한 콘크리트의 상대동탄성계수는 동결융해 싸이클 수 210에서 60% 이하로 나타났다.

• 천문학회보
• /
• 제43권2호
• /
• pp.59.3-59.3
• /
• 2018

공생별 AG Dra와 UV Aur에 대해 지난 10여년간 보현산천문대 1.8m망원경과 고분산 에셀 분광기 BOES(BOao Echelle Spectrograph)로 분광관측을 수행해 왔다. 최근 2017년 11월 - 2018년 6월 관측에서, AG Dra의 Fe II 방출선과 UV Aur $H{\alpha}$ 방출선이 예년과 다른 변화 모습을 보이고 있음을 찾아내었다. 이에 대한 변화 원인을 공전주기, 밝기 변화 또는 다른 이유와 연관지어 설명하고자 한다.

• 천문학회보
• /
• 제45권1호
• /
• pp.70.2-70.2
• /
• 2020

공생별의 밝기 변화와 분광선 변화에 대한 지속적인 관측과 분석은 공생별 구성원의 구조, 거성으로부터의 질량 이동, 백색왜성 근처에서의 부착원반 형성과 이들의 진화에 대한 중요한 정보를 제공한다. 본 연구에서는 보현산 천문대 1.8-m 망원경과 고분산 에셀분광기 BOES를 이용하여 타 연구자에 의해 하룻밤 새 분광선 변화가 있다고 보고된 공생별 CH Cyg를 중심으로 AG Dra와 EG And의 방출선들에 대한 하룻밤 새 변화 모니터링 관측을 수행하였고, 이 세 공생별의 짧은 시간 내 분광적 변화 양상과 특성을 파악하고자 한다.

• BMB Reports
• /
• 제39권4호
• /
• pp.418-425
• /
• 2006

A human bacterial artificial chromosome (BAC) library was constructed with high molecular weight DNA extracted from the blood of a male Korean. This Korean BAC library contains 100,224 clones of insert size ranging from 70 to 150 kb, with an average size of 86 kb, corresponding to a 2.9-fold redundancy of the genome. The average insert size was determined from 288 randomly selected BAC clones that were well distributed among all the chromosomes. We developed a pooling system and three-step PCR screen for the Korean BAC library to isolate desired BAC clones, and we confirmed its utility using primer pairs designed for one of the clones. The Korean BAC library and screening pools will allow PCR-based screening of the Korean genome for any gene of interest. We also determined the allele types of HLA-DRA and HLA-DRB3 of clone KB55453, located in the HLA class II region on chromosome 6p21.3. The HLA-DRA and DRB3 genes in this clone were identified as the DRA*010202 and DRB3*01010201 types, respectively. The haplotype found in this library will provide useful information in future human disease studies.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권6호
• /
• pp.435-440
• /
• 2019

This is to study the accuracy of the actual size according to the TOD(table object distance; TOD) change when measuring blood vessels using angiography equipment, and to help the optimal selection of the device used accordingly. Balls similar to the size of common vessels were calibrated with TOD using 30 mm, 20 mm, 10 mm, 5 mm and acrylic phantoms, catheter calibration from 0 cm to 10 cm, 20 cm and 30 cm, respectively. It was measured whether there was a change in the measured value according to the change. The equipment used was GE Innova 3131 IQ equipment, and the image reconstruction method was GE AW4.7 post processing program. Two radiotechnologists were scanned three times by catheter calibration method and 3DRA(3dimension rotational angiography; 3DRA) volume rendering method. The independent sample T-test showed 0.981 (p> 0.05) to verify the significance between the two observers. As a result, in case of catheter calibration, the error rate at TOD 0 mm and 10 mm is within ± 10%, but when the TOD is changed to 20 mm and 50 mm respectively, the tolerance is ± 10% except for 30 mm ball exceeded. On the other hand, 3DRA was included within the tolerance range of ± 10% overall even when the TOD was changed from 0 mm to 50 mm. In the catheter calibration method, the larger the TOD, the larger the error range, and the 3DRA method was able to measure vascular vessels accurately close to the actual measurement without any consideration of the TOD.