• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.5
• /
• pp.429-436
• /
• 2015

Torque ripples generate mechanical vibration at low speed and acoustic noise at high speed. The back emf harmonics of a PM synchronous motor is one of the main sources of torque ripples. To reduce torque ripples resulting from back emf harmonics, dq-axis harmonic currents that reduce the torque ripples are generally compensated to the current controller. Harmonic current compensation is effective at low speed, but it is not applicable at high speed because of the limited bandwidth of the current controller. In this study, dq-axis harmonic voltage compensation that can reduce torque ripples at high speed is proposed. The dq-axis harmonic voltages are calculated from the motor speed and the dq-axis harmonic currents. The effectiveness of the proposed method in reducing torque ripple is verified by a simulation and experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.6
• /
• pp.496-503
• /
• 2017

This study proposes a high-performance current control algorithm for a diode-bridge-type single-phase boost power factor correction (PFC) converter. The conventional asynchronous single-phase current controllers that directly control AC-type current tend to be accompanied by steady-state errors due to their poor dynamic characteristics for the transient-state, which can be attributed to bandwidth limitations and phase delays. In the proposed algorithm, an ideal current control with minimal phase delays and steady-state errors can be achieved by using a virtual DQ synchronous reference frame and by controlling the synchronous reference frame excluding the frequency component in the single-phase system. The performance of the conventional asynchronous single-phase current controller is compared with that of the proposed algorithm through simulation and experiments, and the results have confirmed the superiority of the latter.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.3
• /
• pp.346-354
• /
• 2014

The study was performed to determine the reliability and validity of the 'Qi Blood Yin Yang Deficiency Questionnaire (Qi Blood Yin Yang DQ)' for the 100 subjects with chronic fatigue. After 100 subjects respond to the 'Qi Blood Yin Yang DQ', Korean medical doctor classified the subjects into 4 groups such as Qi deficiency group, Blood deficiency group, Yin deficiency group and Yang deficiency group. 100 subjects were retested in the same way after 3 weeks. The reliability and the validity of the questionnaire were inspected. Internal consistency of the 'Qi Blood Yin Yang DQ' was excellent (Cronbach alpha 0.916). Test-retest reliability was good (intra-class correlation coefficient 0.699). Construct validity analyzed by exploratory factor analysis produced 4 factors, which were selected from eigenvalues that are greater than 1.0. The 'Qi Blood Yin Yang DQ' consisted of 4 factors. The factor 1, 2, 3 and 4 showed 'Qi deficiency', 'Yin deficiency', 'Yang deficiency' and 'Blood deficiency' respectively. The 'Qi Blood Yin Yang DQ' restructured in this study may provide a fundamental questionnaire and a further study is required for a more advanced, standardized and statistically proven questionnaire.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2283-2287
• /
• 2007

Amyloid fibril formation of amyloid β/A4 protein (Aβ) is critical to understand the pathological mechanism of Alzheimer's disease and develop controlling strategy toward the neurodegenerative disease. For this purpose, dequalinium (DQ) has been employed as a specific modifier for Aβ aggregation and its subsequent cytotoxicity. In the presence of DQ, the final thioflavin-T binding fluorescence of Aβ aggregates decreased significantly. It was the altered morphology of Aβ aggregates in a form of the bundles of the fibrils, distinctive from normal single-stranded amyloid fibrils, and the resulting reduced β-sheet content that were responsible for the decreased fluorescence. The morphological transition of Aβ aggregates assessed with atomic force microscope indicated that the bundle structure observed with DQ appeared to be resulted from the initial multimeric seed structure rather than lateral association of preformed single-stranded fibrils. Investigation of the seeding effect of the DQ-induced Aβ aggregates clearly demonstrated that the seed structure has determined the final morphology of Aβ aggregates as well as the aggregative kinetics by shortening the lag phase. In addition, the cytotoxicity was also varied depending on the final morphology of the aggregates. Taken together, DQ has been considered to be a useful chemical probe to control the cytotoxicity of the amyloid fibrils by influencing the seed structures which turned out to be central to develop therapeutic strategy by inducing the amyloid fibrils in different shapes with varied toxicities.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.2
• /
• pp.171-179
• /
• 1986

The HLA class II region encodes a series of polymorphic glycoproteins that form cell surface heterodimers each consisting of one $\alpha$ and one $\beta$ chain. Thess class II molecules are encoded by genes clustered within three loci. DP, DQ, and DR are functfonally implicated as regulatory signals in intercellular communication during the immune resposes. The phenotypic hallmark of the HLA complex is a high degree of structural and functional polymorphism. Detailed analysis. of such polymorphisms should aid in understanding the molecular basis for associations between HLA and diseases. We have used techniques of restriction enzyme fragment analysis by Southern blotting to investigate polymorphisms associated with DQ $\beta$ class II genes on haplotypes expressing the HLA-DR4 and -DQw3 specificities. The endonucleases Hind III and Bam HI were used to identify a specific DQ $\beta$ genomic polymorphism that precisely corrresponds with the reactivity of a monoclonal antibody A-10-83, previously shown to define a serologic split of DQw3. This study identifies two allelic DQ va. riants. DQw3.1 and DQw3.2. We used these specific genotypic markers to investigate the genomic basis of the association of DR4 with insulin-dependent diabetes mellitus(IDDM) and seropositive juvenile rheumatoid arthritis(JRA). The DR4 positive IDDM demonstrate the predominant expression of DQw3.2 and the very rare expression of DQw3.l. However, in haplotype matched siblings from two IDDM families, all of the DR4 positive siblings display a IDDM-associated DQw3.2 allele. Thus, both affected and healthy individuals can carry the same haplotypes and genomic markers, demonstrating that thess specific allelic variants are genetic elements that indicate a increased risk of IDDM but are not in fact disease specific. We contrasted this result with a similar analysis of patients with another DR4-associated disease, JRA. In contrast to the preponderance of the DQw3.2 allele in IDDM, the JRA patients expressed either the DQw3.1 or the DQw3.2 allele and sometimes both, without apparent association with disease expession. The different genomic markers reported here within HLA-DQ region potentially an analysis of HLA-associated function and disease susceptibility.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.265-270
• /
• 2022

This paper proposes the detection algorithm for switch open fault of asymmetric 6-phase PMSM based on stationary reference frame dq-axis currents. In this paper, target motor has an asymmetric structure in which two upper three windings have an electrical phase difference of 30° and a neutral point is separated. As a result, dual 3-phase PWM inverters and the detection techniques due to open failures of switch are definitely required. In this paper, the dual dq-axis current control method is used for driving the asymmetric 6-phase PMSM and the open fault switch should be detected by using variable all pass filter and low pass filter in order to detect the current amplitude. The effectiveness and usefulness of the proposed method is verified by several experiments.

• Journal of information and communication convergence engineering
• /
• v.1 no.3
• /
• pp.163-168
• /
• 2003

This paper presents a cascade multilevel PWM rectifier without the isolation transformers for energy build-up at each inverter modules. The features and advantages of the proposed PWM rectifier can be summarized as follows; I) It realizes the high power high voltage AC/DC power conversion, 2) It uses no transformer which is bulky and heavy, 3) It has hybrid structure so that switching devices can be effectively utilized, 4) It produces high quality AC current even in high power high voltage applications, 5) The input power factor remains unity by simple modulation index control. The multilevel rectifier is analyzed by using the circuit DQ transformation whereby the characteristics and control equations are obtained. Finally, it will be shown that the system simulation reveals the validity of analyses.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.458-460
• /
• 1996

In this study, the full-state flux observer is designed in the synchronous DQ-frame and the speed adaptation rule is derived by using the MRAS(Model Reference Adaptive System) theory. In this rule, the induction motor becomes a reference model and the flux observer is taken as a adjustable model. A guideline of the adaptation gain is investigated for the precise and stable speed adaptation and the proposed scheme is compared with the conventional one designed in the stationary DQ-frame.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.194-195
• /
• 2011

본 논문은 Bi-directional Inverter(BDI)에 DQ 변환을 적용한 소신호 등가 모델과 이중 루프 제어기 설계에 대해 제안한다. 일반적으로 외부루프의 경우 동적 특성이 매우 느리기 때문에 외부루프 전달함수를 고려하지 않고 설계하는 경우가 많다. 결과적으로 시스템의 안정성이나 동적 특성이 설계한 것과 다르게 나타날 수 있다. 따라서 원하는 특성을 만족하기 위해 실험적 시행착오를 거쳐 설계를 하게 된다. 본 논문에서는 정확한 소신호 등가 모델을 제시하고 제어기를 설계한다. 제안된 방식은 PSIM 시뮬레이션 및 실험을 통해 회로해석과 소신호 등가모델의 타당성 및 제어기 설계의 타당성을 증명하였다.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.475-478
• /
• 2004

본 논문에서는 부하단에서 발생하는 고조파를 검지하는 방법으로 순시 무효전력 방법(IRPM: Instantaneous Reactive Power Method)을 사용하였다. 이 방식은 DQ변환을 통해 순시 무효 전력을 사용하여 고조파를 검지하는 방식이다. 그러나 순시 무효전력 방식은 3상 인버터를 기반으로 하는 DQ변환 방식을 이용하기 때문에 단상 시스템에는 적용될 수 없다. 본 논문에서는 단상에서도 임의의 가상축을 만들어 DQ변환을 수행할 수 있도록 함으로써 순시무효전력 보상 방식을 단상 능동 전력 필터 시스템에도 적용될 수 있는 방안을 제시하였다. 또한 검지된 고조파를 효과적으로 보상할 수 있는 3레벨 NPC 타입 멀티레벨 인버터를 사용하여 고전력 능동 필터를 구성할 수 있도록 하였다.