• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.9
• /
• pp.1-7
• /
• 2014

Brushless Direct Current(BLDC) Motor is essential to measure a rotor position because of that this motor type needs to synchronize the rotor's position and changeover phase current instead of a brush and commutator used on the existing dc motor. Recently, many researches have studied on sensorless control drive for BLDC motor. The conventional control methods are a compensation value dq, Kalman filter, Fuzzy logic, Neurons neural network, and the like. These methods has difficulties of detecting BEMF accurately at low speed because of low BEMF voltage and switching noise. And also, the operation is long and complex. So, it is required a high-performance microprocessor. Therefore, it is not suitable for a small BLDC motor sensorless drive. This paper presents control methods suitable for economic small BLDC motor sensorless drive which are an improved design of the BEMF detection circuit, simplifying a complex algorithm and computation time reduction. The improved motor sensorless drive is verified stability and validity through being designed, manufactured and analyzed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.5
• /
• pp.407-414
• /
• 2014

This study proposes a control design for the grid output current and for reducing the neutral-point voltage oscillation through the small-signal modeling of the three-phase grid connected with a three-level neutral-point-clamped (NPC) inverter with LCL filter. The three-level NPC inverter presents an inherent problem: the neutral-point voltage fluctuation caused by the neutral-point current flowing in or out from the neutral point. The small signal modeling consists of averaging, dq0 transformation, perturbing, and linearizing steps performed on a three-phase grid connected to a three-level NPC inverter with LCL filter. The proposed method controls both the grid output and neutral-point currents at every switching period and reduces the neutral-point voltage oscillation. The validity of the proposed method is verified through simulation and experiment.

• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1369-1379
• /
• 2018

In this paper, a model predictive torque control (MPTC) without the use of a weighting factor for surface mounted permanent-magnet synchronous machine (SPMSM) drive systems is presented. Firstly, the desired voltage vector is predicted in real time according to the principles of deadbeat torque and flux control. Then the sector of this desired voltage vector is determined. The complete enumeration for testing all of the feasible voltage vectors is avoided by testing only the candidate vectors contained in the sector. This means that only two voltage vectors in the sector need to be tested for selecting the optimal voltage vector in each control period. Thus, the calculation time can be reduced when compared with the conventional enumeration method. On the other hand, a novel cost function that only includes the dq-axis voltage errors between the desired voltage and candidate voltage is designed to eliminate the weighting factor used in the conventional MPTC. Thus, the control complexity caused by the tuning of the weighting factor is effectively decreased when compared with the conventional MPTC. Simulation and experimental investigation have been carried out to verify the proposed method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.7
• /
• pp.97-104
• /
• 2011

This paper presents modeling and control for the emerging IGBT converter-based high-voltage direct-current system (IGBT-HVDC). This paper adds to the representation of the IGBT-HVDC system in the dq-synchronous reference frame and its decoupled control scheme. Additionally, since the IGBT-HVDC is able to actively support the grid due to its capacity to control independently active and reactive power production, a reactive power control scheme is presented in order to regulate/contribute to the voltage at a remote location by taking into account its operational state and limits. The ability of the control scheme is assessed and discussed by means of simulations using ahybrid power system, which consists of a permanent magnetic synchronous-generator (PMSG) based wind turbine, an IGBT-HVDC, and a local load.

• Proceedings of the KIEE Conference
• /
• 1999.11a
• /
• pp.10-12
• /
• 1999

Optical properties of $Zn_2AgGaSe_4$ and $Zn_2AgGaSe_4$:$Co^{2+}$ crystals are investigated in the visible and near-infrared regions at 298K. The direct band gap at 298K is 1.630eV for the $Zn_2AgGaSe_4$ and 1.567eV for the $Zn_2AgGaSe_4$:$Co^{2+}$ crystals, respectively. In the optical absorption and PAS spectrum of the $Zn_2AgGaSe_4$:$Co^{2+}$, we observed five impurity absorption peaks at $4220cm^{-1}$, $5952cm^{-1}$, $12422cm^{-1}$, $12987cm^{-1}$ and $14184cm^{-1}$. These impurity absorption peaks are attributed to the electronic transitions between the split energy levels of $Co^{2+}$ ions with Td symmetry of $Zn_2AgGaSe_4$ host lattice. The crystal field parameter Dq, the Racah parameter B and the spin-orbit coupling parameter $\lambda$ are given by $442cm^{-1}$, $425cm^{-1}$ and $440cm^{-1}$, respectively.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.10
• /
• pp.4125-4128
• /
• 2014

The median ages at death from cancers between 1985 and 2005 were calculated to demonstrate that inherent anticancer mechanisms may be a common pathway for different cancers. Seventy-eight patients with gastric, liver and lung cancers, were recruited in the solid cancer group. The leukemia group consisted of 31 patients with three main types of leukemia. The controls were 100 healthy individuals. The samples were typed using an HLA-DR/DQ PCR-SSP typing kit. The results showed that the median ages at death from all causes were 64.7 years in 1985 and 70.1 years in 2005. The range of the median ages at death from all cancers was similar to the corresponding value for deaths attributed to all causes. The frequency of $DRB1^*03$ was 9.6% in the solid cancer group and 3.0% in the control group (p<0.05). The frequency of $DRB1^*04$ in the leukemia group were significantly lower than that of the control (p<0.05). $DRB1^*13$ and $DRB1^*06$ frequencies in the leukemia group were significantly higher than those of the controls (p<0.05). It is suggested that inherent anti-cancer mechanisms may be a common pathway for different cancers and are associated with the immune system and HLA.

• Journal of Oral Medicine and Pain
• /
• v.19 no.2
• /
• pp.205-219
• /
• 1994

Cigarette butts from 5 smokers were gathered and then, placed in room temperature for 1, 3, 5, 7, 15 days. The possible use of the cigarette butts for individual identification was evaluated in sex determination, amplification of D1S80 locus, polymorphisms of HLA-DQA1 gene from the extracted DNA. 1. DNA extraction was possible in cigarette butts weree left in room temperature for 15days, so it can be applicatable to individual identification by polymerase chain reaction(PCR). 2. Amplification of X-Y homologous amelogenin gene by PCR made it possible to identify the sex in saliva stains (cigarette butts). 3. Amplification of D1S80 locus can be acquired from adding the boving serum albumin and hot start PCR procedures from forensic samples such as saliva stains (cigarette butts), so the AMP-FLPs examining is possible. 4. Genotype could be determined simply and rapidly using Amplitype$TM$ HLA-DQ$\alpha$ forensic kit in examining the HLA-DQA1 gene. From the investigation, DNA extraction, sex determination, amplification of D1S80 locus, polymorphisms of HLA-DQA1 gene was successfully done even though the cigarette butts were left for 15 days at room temperature. Therefore cigarette butts are highly reliable and applicatable as molecular biologic samples for individual identification.

• Journal of Power Electronics
• /
• v.10 no.3
• /
• pp.313-319
• /
• 2010

This paper proposes a new compensation algorithm for the current measurement errors in a DFIG (Doubly Fed Induction Generator). Generally, current measurement path with current sensors and analog devices has non-ideal factors like offset and scaling errors. As a result, the dq-axis currents of the synchronous reference frame have one and two times ripple components of the slip frequency. In this paper, the main concept of the proposed algorithm is implemented by integrating the 3-phase rotor currents into the stationary reference frame to compensate for the measured current ripples in a DFIG. The proposed algorithm has several beneficial features: easy implementation, less computation time, and robustness with regard to variations in the electrical parameters. The effectiveness of the proposed algorithm is verified by several experiments.

• Parasites, Hosts and Diseases
• /
• v.50 no.2
• /
• pp.137-141
• /
• 2012

From 2006 to 2010, hospitals in Hanoi treated 10 human patients for dirofilariasis. The worms were collected from parasitic places, and identification of the species was completed by morphology and molecular methods. Ten parasites were recovered either from the conjunctiva (n=9) or subcutaneous tissue (n=1). The parasites were 4.0-12.5 cm in length and 0.5-0.6 mm in width. Morphological observations suggested all parasites as Dirofilaria repens. Three of the 10 parasites (1 from subcutaneous tissue and 2 from eyes) were used for molecular confirmation of the species identification. A portion of the mitochondrial cox1 (461 bp) was amplified and sequenced. Nucleotide and amino acid homologies were 95% and 99-100%, respectively, when compared with D. repens (Italian origin, GenBank AJ271614; DQ358814). This is the first report of eye dirofilariasis and the second report of subcutaneous tissue dirofilariasis due to D. repens in Vietnam.

• The Plant Pathology Journal
• /
• v.24 no.1
• /
• pp.93-96
• /
• 2008

In August 2006, a severe disease incidence showing mosaic and/or necrotic symptoms on two bell pepper varieties including red-colored 'Special' and yellow-colored 'Fiesta' was observed in a greenhouse located in Gwangyang, Jeonnam province, Korea. To identify causal viruses, total RNAs were extracted from 11 fruit samples with and without symptoms. Specific oligonucleotide primers for Cucumber mosaic virus (CMV), Pepper mottle virus (PepMoV), Tomato spotted wilt virus (TSWV) and Pepper mild mottle virus (PMMoV) were designed based on the sequences available on GenBank. Database comparisons of the deduced amino acid sequences of each sequence produced 100% and 98% matches with nucleocapsid protein gene of TSWV (Acc. No. ABE11605) and coat protein gene of CMV (Acc. No. DQ018289), respectively, suggesting that the symptoms on bell pepper fruits might be caused by the infection of CMV and TSWV. To our knowledge this is the first report of necrotic as well as mosaic virus disease on bell pepper fruits by the infection of CMV and TSWV in Jeonnam province, Korea.