• Review of KIISC
• /
• v.12 no.2
• /
• pp.50-61
• /
• 2002

최근 전자상거래의 활성화 및 안전한 네트워크의 구현에 공개키 기반구조의 응용이 확대되면서 공개키의 무결성과 신뢰성을 제공하기 위해 공개키 인증서 상태 검증에 관한 연구가 활발히 진행되고 있다. 본 고에서는 PKI 응용 프로토콜 중에서 인증서의 유효성을 검증하기 위한 온라인 인증서 상태 검증 프로토콜(Outline Certificate Status Protocol)의 최근 연구 동향에 대하여 분석하였으며, 현재 상용화되어 있는 제품들에 대하여 조사하였다. 또한, 특정 인증서에 대한 온라인 취소 상태 확인 서비스(ORS: Online Revocation Status), 인증 경로의 발견을 서버로 위임하는 대리 인증 경로 발견 서비스(DPD: Delegated Path Discovery), 그리고 중앙 집중 서버에게 인증 경로 검증의 기능을 위임하는 대리 인증 경로 검증 서비스(DPV: Delegated Path Validation) 등의 온라인 인증서 상태 검증 프로토콜에서 제공하는 서비스들에 대해서도 살펴보았다. 현재 온라인 인증서 상태 검증 프로토콜(OCSP)에 관한 문서는 IETF에서 표준화한 RFC2560과 2000년 11월과 2001년 3월에 제안된 드래프트가 있으며, 본 고에서는 RFC2560과 제안된 드래프트를 비교 분석하였으며 국내\ulcorner외 제품의 동향과 온라인 인증서 상태 검증 프로토콜의 활용 범위에 대해서 간략하게 살펴보았다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.5
• /
• pp.80-86
• /
• 2005

High velocity oxy-fuel thermally sprayed coating of the WC-Co cermet material is a well-established process for modifying the surface properties of the structural components exposed to the corrosive and wear attacks. The hard WC phase in the coating resists to the wear while the soft metallic Co increases the adhesive and cohesive bonding properties. The coating properties deposited by the HVOF process are greatly dependent on the feedstock materials and processing parameters. The effects of the feedstock material and process coating parameters including the in-flight particle parameters and resultant coating microstructures were observed in this paper.

• Journal of Welding and Joining
• /
• v.21 no.4
• /
• pp.46-55
• /
• 2003

TiO$_2$-WO$_3$(8.2wt%) coatings were prepared by the APS (Atmospheric Plasma Spraying) process to clarify the relationship between the process parameters(H$_2$ gas flow rate of plasma 2nd gas and spraying distance) of the APS coating and photo-decomposition efficiency kinetics of the MB(methylene blue) aqueous solution decomposition and to understand the effect of addition of WO$_3$ on photocatalytic properties of TiO$_2$ sprayed coating. Further, the temperature and velocity of flying particles were measured by DPV-2000 to investigate the relationship between microstructure of coatings and process parameters. Properties of coatins were investigated by XRD, SEM, XPS, RAMAN, UV/VIS spectrometer. In case of the TiO$_2$-WO$_3$(8.2wt%) coating, it had a lower anatase fraction than that of pure-TiO$_2$ coatings because of flying in the higher temperature plasma plume by the heavy weight of TiO$_2$, WO$_3$. And, when WO$_3$ added powders were spayed, the doping effects of W ions substituted into the Ti ion sites was not occured during melting and solidification cycles of spraying. It was found that the addition of WO$_3$ was ineffective effective on increasing photo-decomposition efficiency of TiO$_2$ sprayed coating.