• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.258-265
• /
• 2002

In this paper, we design single and symmetrical double lenses with DOE. The specifications are the following : Image area is 4.8 mm $\times$ 3.6 mm, F/# is 2.8 and the overall length (from first lens surface to image plane) is 6.8mm. After comparing the optical performance and characteristic values, we determine that symmetrical double lenses are superior to single lenses. Symmetrical double lenses have the merits of fewer zones, weaker flare, and smaller distortion than single lenses.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.72-77
• /
• 2008

About 25% of overall energy use of Korea had been spent in buildings. It is crucial to acknowledge the importance of saving energy in buildings. In order to save energy, it is important to predict accurate energy use. There are numerous energy simulation program that predicts both energy load and energy use. The problem of the energy simulation program is that it holds too many input variables, and it needs experts to model a building. So, our purpose of this study is to develop the simplified thermal load calculation program for building energy analysis which eliminates coordinates of building components instead of using full coordinates by using DOE2. Since the engine of the program is DOE2, we verified the validity of S-DOE by comparing peak heating & cooling load results and annual energy use results. The results shows that there are little difference between VisualDOE and S-DOE. Also it showed that S-DOE took less time to input variables than VisualDOE. These results reveals that the application of S-DOE is possible to accurately predict energy load and energy use of the building and still have strong point that it takes less time to analyse building energy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.1
• /
• pp.9-15
• /
• 2009

There are various types of energy simulation tool to predict both thermal load and energy use. However, the problem about these software is that they have too much input variables and need expert with skills to run the simulation. Therefore, the purpose of this study is to develop the thermal analysis simulation program with input variables which eliminates coordinates of building components instead of using full coordinates by using DOE2. Since the simulation engine of the program is DOE2, the validity of S-DOE is performed by comparing peak heating and cooling load results with VisualDOE and annual energy use results with actual energy use of 1996. The results have shown that there are little difference between VisualDOE and S-DOE. Also it showed that there are little difference between actual energy use and S-DOE energy use results. S-DOE took less time to model a building than VisualDOE. These results reveals that the application of S-DOE have potentials in accurately predicting both energy load and energy use of the building and still have an advantage of taking less time to model a building.

• Journal of Acupuncture Research
• /
• v.40 no.4
• /
• pp.356-367
• /
• 2023

Background: The aim of this study is to determine the antioxidant and anti-inflammatory effects of Dusokohwaeum (DOE). Methods: To measure the antioxidant and anti-inflammatory effects of DOE, the total flavonoid and polyphenol contents and radical scavenging activity were measured. Furthermore, reactive oxygen species (ROS), nitric oxide, and cytokine production were measured by treating lipopolysaccharide-induced RAW264.7 cells with DOE, and gene expression levels of inducible cyclooxygenase-2, nitric oxide synthase, and cytokines were evaluated. Results: Radical scavenging experiments revealed a significant concentration-dependent increase in scavenging capacity. The production of ROS, nitric oxide, and cytokines in the cells showed a significant concentration-dependent decrease when compared with the control group. The gene expression levels of inducible cyclooxygenase-2, nitric oxide synthase, and cytokines also showed a significant concentration-dependent decrease when compared with the control group. Conclusion: Interestingly, the antioxidant and anti-inflammatory effects of DOE were 23.42 ± 0.64 mg GAE/g and 20.83 ± 0.98 mg QE/g, respectively. The administration of DOE resulted in a concentration-dependent increase in scavenging ability in the 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging ability experiments. The production of intracellular ROS and nitric oxide was significantly reduced in the presence of DOE. The production of inflammatory cytokines (prostaglandin E2, tumor necrosis factor-alpha [TNF-α], interleukin-1 beta [IL-1β], and IL-6) was significantly reduced in the presence of DOE. Finally, the expression levels of inducible nitric oxide synthase, cyclooxygenase-2, TNF-α, IL-1β, and IL-6 were significantly decreased in the presence of DOE.

• Korean Journal of Animal Reproduction
• /
• v.27 no.4
• /
• pp.287-297
• /
• 2003

The aim of this review is to give insight into the reproduction potential of the Korean native goat(KNG) doe. The mean age of the first estrus in the KNG doe is 141.24$\pm$18.l7 days. The length of the estrous cycle was recorded as being 20.58$\pm$2.63 days, with the mean duration of estrous period being 17.8$\pm$7.3 to 32.9$\pm$1.2 h, and the duration of the post-partum anestrous period being 13.4(9 to 18) to 30.1$\pm$3.8 days in the KNG doe. The ages at first delivery are 10 to 12 months(56.3％) in the KNG doe. The KNG does are no restricted breeding season, because estrus and kiddings are observed throughout the year. The mean gestation period of the KNG doe is recorded as being 150.69$\pm$6.14 days with parities having no significant effect on gestation length. The mean interval between parturitions in the KNG doe is 207.78$\pm$1.72 days with parities and birth type having no significant effect on kidding intervals. The mean litter sizes at birth in the KNG doe are 1.69$\pm$0.03 heads, and litter size at birth was affected (P<0.05) by parity. The mean birth weight of kid in the KNG is 2.04$\pm$0.30 kg with a variety as being 2.28$\pm$0.26, 2.11$\pm$ 0.30 and 1.64$\pm$0.19 kg for singles, twins and triplets over of birth type, respectively. The mean mortality of 635 kids in the KNG is 23$\pm$1 ％ with a variety as being 28$\pm$3, 21$\pm$2, 16$\pm$3 and 46$\pm$15 ％ for singles, twins, triplets and quadruplets of birth type, respectively.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.151-155
• /
• 2018

Degree of membrane degradation in Proton Exchange Membrane Fuel Cells (PEMFC) is mainly evaluated by the hydrogen crossover current density. The hydrogen crossover current density is measured by linear sweep voltammetry (LSV), which differs from the DOE protocol and the NEDO protocol. In this study, two protocols were compared during PEMFC operation and accelerated stress test. In the LSV method by the DOE method, the scan rate change affects the hydrogen crossover current density, but the NEDO method does not affect the hydrogen crossover current density. In the course of 15,000 cycles of polymer membrane wet/dry cycle, the DOE method was sensitive to membrane degradation, but the NEDO method was less sensitive to membrane degradation than the DOE method.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.138-146
• /
• 2020

Design of experiments (DOE) is a method that has been applied in the industry to improve value for many decades. This study provides an overview of 115 cases of statistical DOE applications in the field of chemical engineering. All cases were published in important scientific journals for the last ten years. The applied design type, the experiment size, the number of factors and levels affecting the response variable, and the area of application for the design were all analyzed. Obviously, the number of publications related with statistical DOE increased over time.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.240-249
• /
• 2001

A high speed ultra-compact lens with a diffractive optical element (DOE) is designed, which can be applied to mobile communication devices such as IMT2000, PDA, notebook computer, etc. The designed hybrid lens has sufficiently high performance of less than f/2.2, compact size of 3.3 mm (1st surf. to image), and wide field angle of more than 30 deg. compared with the specifications of a single lens. By proper choice of the aspheric and DOE surface which has very large negative dispersion, we can correct chromatic and high order aberrations through the optimization technique. From Seidel third order aberration theory and Sweatt modeling, the initial data and surface configurations, that is, the combination condition of the DOE and the aspherical surface are obtained. However, due to the consideration of diffraction efficiency of a DOE, we can choose only four cases as the optimization input, and present the best solution after evaluating and comparing those four cases. On the other hand, we also report dramatic improvement in optical performance by inserting another refractive lens (so-called, field flattener), that keeps the refractive power of an original DOE lens and makes the petzval sum zero in the original DOE lens system. ystem.

• KIEAE Journal
• /
• v.11 no.6
• /
• pp.101-108
• /
• 2011

The weather data has important role for performative building design. If the data location is close to building site, the result of performative design can be accurate. The data which have used nowadays in Korea are from U.S. Department of Energy (DOE) and Korea Solar Energy Society (KSES) but they cover only several locations in Korea which are 4 in DOE and 11 in KSES and there are opinions which it could be served building design efficiently even if the data are not enough. However the weather data for micro-climate are exist which are Green Building Studio Virtual Weather Station (GBS VWS) and Meteonorm weather data. Each weather data has different generation methods which are TMY2, TRY, MM5, and extrapolation. In this research, the weather date for climate are compared with DOE and KSES to check correlation. The result shows the value of correlation in Dry Bulb Temp. and Dew Point Temp. is around 0.9 so they have high correlation in both but in Wind Speed case the correlation(around 0.2) is not exist. In overall result, the data has correlation with DOE and KSES as the value of correlation 0.648 of GBS VW and 0.656 of Meteonorm. Even if the correlation value is not high enough, the patterns of difference in each weather element are similar in scatter plot.

• Journal of the Optical Society of Korea
• /
• v.10 no.3
• /
• pp.105-111
• /
• 2006

A novel image quality evaluation method, which is based on combination of the rigorous grating diffraction theory and the ray-optic method, is proposed. It is applied for design optimization and, tolerance analysis of optical imaging systems implementing diffractive optical elements (DOE). The evaluation method can predict the quality and resolution of the image on the image sensor plane through the optical imaging system. Especially, we can simulate the effect of diffraction efficiencies of DOE in the camera lenses module, which is very effective for predicting different color sense and MTF performance. Using this method, we can effectively determine the fabrication tolerances of diffractive and refractive optical elements such as the variations' in profile thickness, and the shoulder of the DOE, as well as conventional parameters such as decenter and tilt in optical-surface alignments. A DOE-based 2M-resolution camera lens module designed by the optimization process based on the proposed image quality evaluation method shows ${\sim}15%$ MTF improvement compared with a design without such an optimization.