• Journal of Environmental Science International
• /
• v.29 no.5
• /
• pp.551-558
• /
• 2020

This study aims to increase the ability to adapt to the ecosystem and promote a sustainable use of the natural environment, by classifying the types of damaged lands according to various factors, such as the characteristics of the target area and form, cause, and impact of damage. Moreover, the study suggests the development of evaluation categories and criteria by each type. The results obtained are as follows: first, for the assessment of damaged lands, the changed areas were identified utilizing land cover maps. Video analysis was performed to increase the accuracy, and 88 sites were obtained. Second, the types of damage were classified into ecological infrastructure and ecological environment, and the sub-factors of the cause of damage were classified into 12 factors. Third, each evaluation system for the types of damage was composed of four steps, considering each type of damage and the level of evaluators being higher than paraprofessionals. To supplement this study, it will be necessary to utilize the database of damaged lands other than the Seoul Metropolitan Area and conduct an on-site survey for verification in the future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.367-372
• /
• 2006

The revision of SOLAS, Chapter V, which entered into force on 1 July 2002, has firmly established the electronic navigational chart as part of the international maritime safety system. Its possible recognition as a paper chart equivalent confirms the considerable safety benefits provided by the official Electronic Chart Display and Information Systems (ECDIS). Elaborated by the Author IAMU Model Course on operational use of ECDIS aims to provide answers to some of the most commonly asked questions regarding various types of electronic charts (ENC, RNC, DNC) and electronic chart systems (ECDIS, RCDS, ECS). Following the earlier adoption of the International Convention STCW 78/95 and IMO model training courses, e.g. IMO Model Course on ECDIS [2], to assist in the implementation of the Convention and the associated IMO Assembly resolutions, a number of IAMU Member Universities had suggested that IAMU should develop model training courses on higher academic level to assist in achieving a more rapid transfer of information and skills regarding new developments in marine technology. The provision of model courses could help instructors improve the quality of their existing courses and enhance their effectiveness in meeting the requirements of the IAMU. In this paper the Author presents the results of two IAMU research projects sponsored by Nippon Foundation, titled 'IAMU Model Course on Training in Operational Use of ECDIS' and 'IAMU Handbook on ECDIS'.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.6 no.2
• /
• pp.1-7
• /
• 2023

Purpose: The purpose of this study is to investigate the characteristics of airborne radon concentration by season in public-use facilities in South Korea. Research design, data and methodology: The data is provided by the public data portal, and public-use facilities nationwide where radon in the air is measured are specialized sanatorium for senior citizens, libraries, childcare facilities, postpartum care centers, medical institutions, funeral halls, underground shopping malls, and underground subway stations. Results: The facility with the highest radon concentration in public-use facilities was childcare facilities with an average of 50.2 ± 21.7 Bq/m³, while the average of medical institutions was the lowest at 24.8 ± 5.7 Bq/m³. The season with the largest difference in average radon concentration between childcare facilities and medical institutions was in the order of fall (28.6 Bq/m³), followed by winter (28.1 Bq/m³), spring (23.0 Bq/m³), and summer (22.0 Bq/m³). Conclusions: The main concentration levels of each public-use facility shown in this study are all below domestic and international standards, but there is a significant concentration difference between facilities. By season, winter showed the highest average concentration (40.6 ± 21.3 Bq/m³) and summer showed the lowest average concentration (23.8 ± 14.0 Bq/m³).

• Korean Journal of Veterinary Research
• /
• v.38 no.4
• /
• pp.882-897
• /
• 1998

This experiment was conducted to predict the effects of motional characteristics on the fertility of Korean native cattle(KNC) by using CASA technology and in vitro fertilization system. Twenty-six KNC frozen semen straws were obtained from Korean KNC improvement department, livestock improvement main division, national livestock cooperatives federation in Korea. Specimens were allowed to thaw at $37^{\circ}C$ for 30 sec in water bath. Semen analysis was performed on semen image analysis system(SIAS, Medical supply, Korea) adjusted to the gate settings and used the semen droplet ($5{\mu}l$) placed on Makler counting chamber(Sefi medical instrument, Israel) prewarmed at $37^{\circ}C$. The same person used the same micropipette to fill the Makler counting chamber. A total of 150 or more of sperms were analysed in each specimen by a single trained person by scanning at least 5 to 10 fields. The oocytes collection, in vitro maturation, IVF, in vitro culture and determination of the cleavage rate were performed by the technique, as described by Hwang et al (1997). Statistical analysis was done by linear regression with use of the Sigma plot program on a IBM personal computer. The cleavage rate in vitro fertilized oocyte was significantly correlated(P<0.05) with MOT, VCL, VSL, VAP, ALH, BCF and MAD, but not CON, LIN, STR, WOB, DNM, DNC and HYP in regressional analysis. The results show that some kinematic characteristics of frozen-thawed semen by CASA can be predict the fertility in in vitro model system.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.6
• /
• pp.204-215
• /
• 2008

Demolition work is a precedence activity that is performed earlier than other remodeling activities. And demolition work is one of the critical path activities. So, demolition work is needed for systematic plan and management. However, contractors of the remodeling project established a rough plan and did not consider recycling wastes, safety of workers and structural stable of building. To improve this problem, a eco-friend process model of remodeling project is needed to be established. The process model is composed of five phases; 1) survey and analysis of general condition of demolition work, 2) prepare documents of demolition work 3) establishing demolition work plan, 4) demolition and inspection, 5) post-demolition management. Especially, demolition documents are based on establishing WBS, selecting the equipment and method, waste management and structure reinforcement. A process model of eco-friend demolition work is developed by using IDEF0 method.

• Korean Journal of Agricultural Science
• /
• v.47 no.1
• /
• pp.59-66
• /
• 2020

Particulate matter (PM) is regarded as a major threat to public health and safety in urban areas. Despite a variety of efforts to systemically monitor the distribution of PM, the limited amount of sampling sites may not provide sufficient coverage over the areas where the monitoring stations are not located in close proximity. This study examined the capacity of using remotely sensed data to estimate the PM10 and PM2.5 concentrations in Seoul, South Korea. Multiple linear regression models were developed using the multispectral band data from the Moderate-resolution imaging spectro-radiometer equipped on Terra (MODIS) and Operational Land Imager equipped on Landsat 8 (Landsat 8) and meteorological parameters. Compared to MODIS-derived models (r² = 0.25 for PM10, r² = 0.30 for PM2.5), the Landsat 8-derived models showed improved model reliabilities (r² = 0.17 to 0.57 for PM10, r² = 0.47 to 0.71 for PM2.5). Landsat 8 model-derived PM concentration and ground-truth PM measurements were cross-validated to each other to examine the capability of the models for estimating the PM concentration. The modeled PM concentrations showed a stronger correlation to PM10 (r = 0.41 to 0.75) than to PM2.5 (r = 0.14 to 0.82). Overall, the results indicate that Landsat 8-derived models were more suitable in estimating the PM concentrations. Despite the day-to-day fluctuation in the model reliability, several models showed strong correspondences of the modeled PM concentrations to the PM measurements.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.3
• /
• pp.99-103
• /
• 1998

The curved surface machined by plate end mill causes a excess non-cutting volume, in these cases ball end mill is used for the curved surfaces. This study is aimed to obtain the optimum cutting conditions of various cutting speed, table speed, tool diameter, radius of curvature roughness on the conditions of various cutting speed, tool diameter, radius of curvature when machining the curved surface using the ball end mill. After designing curve rates, obtaining NC data by CAD/CAM system through CC-Cartesian method and transferred the data through DNC system, we machined the specimens by the CNC machining center, The surface roughness of specimens was measured by surface roughness tester and CNC 3D coordinate measuring machine. The cutting condition were the same as follow velocity; 15, 20, 25 30m/min, feed rate;40, 60, 80, 100m/min and radius of curvature; 30,40,50,60mm, tool diameters; ø8, ø12, ø16, ø 20mm. Analizing the working results, we can acquire the optimum cutting condition of curved specimen at the cutting velocity of 20~25m/min and the feed rate of 80mm/min. As the same cutting condition the best surface roughness was showed at ø16mm of the tool diameter. But the tool diameter was smaller than ø8mm. we could improve for the surface roughness by controlling the cusp.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.85-92
• /
• 2008

Demolition work is a precedence activity that is performed earlier than other remodeling activities. And demolition work is one of the critical path activities. So, demolition work is needed for systematic plan and management. However, contractors of the remodeling project established a rough plan and did not consider recycling wastes, safety of workers and structural stable of building. To improve this problem, a eco-friend process model of remodeling project is needed to be established. The process model is composed of five phases; 1) survey and analysis of general condition of demolition work, 2) prepare documents of demolition work 3) establishing demolition work plan, 4) demolition and inspection, 5) post-demolition management. Especially, demolition documents are based on establishing WBS, selecting the equipment and method, waste management and structure reinforcement. A process model of eco-friend demolition work is developed by using IDEF0 method.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.4
• /
• pp.866-874
• /
• 2006

Atopic dermitiis(AD) is a chronic inflammatory skin disease, which requires safe and effective medicinal therapy. Over production of Th2 cytokines and chemokines as well as IgE, which are mediated by highly activated immune cells, have been considered as pathologic factors in this disease. We found that Gamipaidok-san(GPDS), which is a traditional herbal medicine clinically prescribing for atopic dermitis patients in the hospital, has suppressive effects on the development of DNC8 induced dermatitis in Nc/Nga atopic model. Oral administration of GPDS at the concentration of 250 mg/Kg for 12 weeks significantly suppressed the clinical severity of the dermatitis including pruities, edema, eczematous and dryness. Histological examination revealed that thickness of dermis and epidermis were considerably reduced, and the number of infiltrated inflammatory immune cells including mast cells, CCR3+, and CD4+ T cells were decreased in the affected skin and ear, and consistantly, the number of CD3+/CCR3+ cells in Iymph nodes were decreased. The levels of Th2 cytokines produced by activated splenocyte from atopic mice were also down-regulated by GPDS. Furthermore, the serum levels of IgE were considerably reduced, which accompanied by a decrease in the number of B220+IgE+ B cells in the Iymph nodes. Taken together, these results suggested that oral administration of GPDS, a traditional herbal medicine, has suppressive effects on atopic dermitis of Nc/Nga mouse by the modulation of the immune system, therefore GPDS has potential as a natural therapeutic for treatment of atopic dermatitis.

• Journal of Embryo Transfer
• /
• v.18 no.1
• /
• pp.43-50
• /
• 2003

The objective of this study was to investigate the effect of cryopreservation by slow and rapid freezing on the sperm motility index, viability and morphology of post-thaw human spermatozoa. After rapid freezing and thawing, sperm motility index was significantly higher (MOT:47.40$\pm$20.06%, VCL : 38.12$\pm$15.58 $\mu$m/s, VSL : 28.19$\pm$14.10 $\mu$m/s, VAP:33.64$\pm$15.15 $\mu$m/s, and HYP 2.77$\pm$2.71%) than slow freezing and thawing(MOT : 43.39$\pm$ 18.79%, VCL .33.91 $\pm$ 13.50 Um/s, VSL . 19.98$\pm$0.88 $\mu$m/s, VAP : 24.60$\pm$11.72 $\mu$m/s, and HYP . 1.33$\pm$1.57% ; P<0.05). But sperm Linearity(LIN) was significantly lower(28.83 $\pm$ 10.35) comparing to the slow freezing method(34.64 $\pm$ 11.36 ; P<0.05). On the other hand, significant difference were not observed MAD, WOB, DNC and DNM by slow and rapid frozen-thawed methods. After rapid freezing and thawing, sperm viability was lower(60 $\pm$ 2.2%) than slow freezing method(62 $\pm$2.1%) and sperm morphology was higher(46$\pm$7.7%) than that(44: 8.3). But there was no significantly These results indicate that rapid freezing method was positive effect of sperm cryopreservation in human.