• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.269-281
• /
• 2016

The statistical analyses of coefficient of variation, heritability, and genetic advance were carried out to identify differences in morphological characteristics, such as the stem and inflorescence length, of 10 major commercial cultivars of spray chrysanthemum (Chrysanthemum morifolium). For morphological characteristics, stem lengths ranged from 46.4 cm to 54.9 cm, the maximum diameter of stem was 5.6 to 8.5 mm, the hardness of the stem was 0.17 to $0.70kg{\cdot}m^{-2}$, the fresh weight of stem was 7.5 to 17.5 g, the dry weight of the stem was 1.6 to 3.3 g, the ratio of dry weight/fresh weight of stem was 15.9% to 23.1%. Also, the number of leaves on the stem was 8.4 to 12.2, the stem leaf area was 17.8 to $37.8m^2$, the fresh weight stem leaves was 5.3 to 18.6 g, the dry weight was 0.5 to 1.4 g and the ratio of dry weight /fresh weight of stem leaves was 7.6% to 11.5%. The inflorescence length ranged from 10.1 to 18.6 cm, the fresh weight of inflorescence was 7.3 to 26.7 g, the dry weight of inflorescence was 1.2 to 2.8 g, the ratio of dry weight /fresh weight of inflorescence was 10.4% to 17.1%. For flower, the diameter of the flower center was 8.2 to 13.3 mm, the petal width was 5.7 to 14.0 mm, the petal length was 12.9 to 33.1 mm, and the petal thickness was 157.8 to $354.4{\mu}m$. The mean values of each character in each cultivar were very different, and DMRT and LSD values based on morphological characteristics among 10 cultivars were highly significant. For variability and genetic parameters, the lowest CV (coefficient of variation), PCV (phenotypic coefficient of variation), and GCV (genotypic coefficient of variation) were 4.79% to 5.15% in stem length, and the highest variations were 62.97% to 65.21% in leaf area. ECV (error or environmental coefficient of variation) was the lowest for leaf area (1.71%) and it was the highest for leaf dry weight (19.30%). Heritability also significantly differed among the characteristics, ranging from 68.69% to 99.67%, the lowest value was shown in ratio of dry weight /fresh weight of stem and the highest value was for leaf area of stem. The value for genetic advance was the lowest in hardness of stem at 0.30 and the highest in leaf thickness at 156.65. The lowest genetic advance as percentage of mean of stem hardness was 9.17%, while the highest percentage of stem length was 134.27%. Thus the characters which had the highest values indicated above show the influence of additive gene action and may provide useful resources for selection programs for agronomic improvement.

• The Journal of the Korea Contents Association
• /
• v.10 no.7
• /
• pp.285-296
• /
• 2010

This study was implemented among 100 students of C College of Public Health who have healthy permanent dentition in order to measure the morphology and sizes of clinical crowns of permanent maxillary molars. The following are conclusions of this study. 1. The cusp height, crown width, crown thickness of clinical crowns appeared to be bilaterally symmetrical. 2. The strong development of the buccal groove showed to be superior in the right first molar. The appearance rate of the buccal pit was high in the right first molar also. 3. The type 4th cusp appeared as 100% in the left and right first molars, and 78%, 75% in the left and right second molars respectively. 4. The distal lingual cusp(DLC) size were bilaterally symmetrical in the type 4th cusp. 5. As for the distance between two cusp tips, it was large between mesial cusp tips in all of the first and second molars at both sides. 6. Development of the Carabelli's cusp was high in both the left and right first molars. 7. The appearance rate of the oblique ridge was 87.0% in the right first molar, 73.0% in the right second molar, 88.0% in the left first molar, and 73.0% in the left second molar. This is considered to be caused by people who have mild dental crown caries in their first molars. 8. The appearance rate of the mesial marginal ridge tubercle(DMRT) was high in both of the left and right first molars. That of the distal tubercle was 16.0% in the right first molar, 26.0% in the right second molar, 14.0% in the left first molar, and 21% in the left second molar.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.3
• /
• pp.343-348
• /
• 2015

Soybean is one of the important food crop around the world. Especially in East Asia, it is the main ingredient for traditional food like soy sauce and soy paste. The double cropping system including soybean following onion, Chinese cabbage, and potato is widely adopted in Southern region of Korea. In this system, sowing date of second crop (soybean) can be delayed depending on first crops' growth period and weather condition. When planting date is delayed it is known that soybean yield is declined because of shorter vegetative growth period and earlier flowering induced by warm temperature and changes in photoperiod. The objective of this study was to determine soybean growth and yield responses as plant populations at late planting date. Field experiment was conducted at Department of Functional Crop, National Institute of Crop Science, RDA located in Miryang, Gyeongsangnam-Do for two years ('13-'14) in upland field with mid-late maturity cultivar Daewon. A split-plot block design was used with three replications. Main plots were three sowing dates from June 20 to July 20 with 15 days intervals, and subplots were 4 levels of planting densities. Data of maturity (R8) was recorded, yield components and yield were examined after harvesting. Experimental data were analyzed by using PROC GLM, and DMRT were used for mean comparison. Optimum planting population for maximizing soybean yield in late planting which compared with standard population. In mid-June planting, higher planting density causes increased plant height and decreased diameter which lead to higher risk of lodging, however, reduced growth period due to late planting alleviated this problem. Therefore higher seeding rates can provide protection against low seedling emergence caused by late planting in this region.

• Korean Journal of Weed Science
• /
• v.7 no.3
• /
• pp.329-336
• /
• 1987

Antagonistic interaction between glyphosate and some herbicides in effects of post-emergence application on cut grass and of pre-emergence application on some weed species including barnyardgrass was evaluated with pots in plastic house. By addition of oxyfluorfen to glyphosate, the weeding efficacy on cutgrass was visually evaluated as promotive in both weeding rate and efficacy. However, by alachlor, simazine, gluphosinate or quizalofop-ethyl showed delayed weeding rate, and by paraquat, the promotive in rate but lower in efficacy, respectively. Fresh weights of cutgrass at 30 days after the lower-rate application has generally indicated the lower weeding efficacy than that from glyphosate alone. Even at higher rate application, the addition of alachlor or simazine to glyphosate has still indicated the lower efficacies. As a result of interaction analysis by Colby method, no synergism was detected from any treatments, and the combinations of simazine or paraquat to glyphosate in lower mixing rate showed significant antagonism at 5% probability level of DMRT. On the annual weed species including barnyardgrass, the significant soil-residual weeding efficacies were recognized by addition of any rate of oxyfluorfen, alachlor, simazine and higher rate of quizalofop-ethyl to glyphosate, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.369-378
• /
• 2003

Statement of Problem: Recently, resin cements have become more widely used and have been accepted as prominent luting cements. Current resin cements exhibit less microleakage than conventional luting cements. However, the constant contact with water and exposure to occlusal forces increase microleakage even in resin cements inevitably. Most bonding resins have been modified to contain a hydrophilic resin such as 2-hydroxyethylmethacrylate (HEMA) to overcome some of the problems associated with the hydrophobic nature of bonding resins. By virtue of these modifications, bonding resins absorb a significant amount of water, and there may also be significant stresses at bonding interfaces, which may adversely affect the longevity of restorations. Therefore the reinforcement of water stability of resin cement is indispensable in future study. Purpose: This study was conducted to examine the influence of water retention on microleakage of two resin cements over the period of 6 months. Materials and Methods: 32 extracted human teeth were used to test the microleakage of a single full veneer crown. Two resin cements with different components and adhesive properties - Panavia F (Kuraray Co., Osaka, Japan) and Super-Bond C&B (Sun Medical Co., Kyoto, Japan)- were investigated. The storage medium was the physiological saline solution changed every week for 1 month, 3 months, and 6 months. One group was tested after storage for 1 day. At the end of the each storage period, all specimens were exposed to thermocycling from $5^{\circ}C$ to $55^{\circ}C$ of 500 cycles and chewing simulation of 50,000 cycles, and then stained with 50% silver nitrate solution. The linear penetration of microleakage was measured using a stereoscopic microscope at ${\times}40$ magnification and a digital traveling micrometer with an accuracy of ${\pm}3{\mu}m$. Values were analyzed using two-way ANOVA test, Duncan's multiple range tests (DMRT). Results : Statistically significant difference of microleakage was shown in the 3-month group compared with the1-day or 1-month group in both systems (p<0.05) and there were statistically significant differences in microleakage between the 3-month group and the 6-month group in both systems (p<0.05). The two systems showed different tendency in the course of increased microleakage during 3 months. In Panavia F, microleakage increased slowly throughout the periods. In Super-Bond C&B, there was no significant increase of microleakage for 1 month, but there was statistically significant increase of microleakage for the next 2 months. For the mean microleakage for each period, in the 3-month group, microleakage of Super-Bond C&B was significantly greater than that of Panavia F. On the other hand, in the 6-month group, microleakage of Panavia F was significantly greater than that of Super-Bond C&B (p<0.05). Conclusion: Within the limitation of this study, water retention of two different bonding systems influence microleakage of resin cements. Further studies with the longer observation periods in viro are required in order to investigate water stability and the bonding durability of the resin cement. CLINICAL IMPLICATIONS Microleakage at the Cement-tooth interfaces did not necessarily result in the failure of the crowns. But it is considered to be a major factor influening the longerity of restorations. Further clinical approaches for decreasing the amount of microleakage are required.

• Korean Journal of Weed Science
• /
• v.13 no.2
• /
• pp.138-150
• /
• 1993

Experiments were carried out to understand how much do the environmental factors affect growth and tuber formation of arrowhead, Sagittaria trifolia L. The more the light transmittance decreased, the more the numbers of leaves and floral axes decreased. The dry matter weight of tops and the number and the fresh weight of formated tuber were significantly different between the light transmittance of more than 50% and that of less than 30% at the 5% level of DMRT. Plant height, number and width of leaves, and number of floral axis were affected by the Light spectra. And the degree of their effects on growth of arrowhead was different form the light spectrum. The natural light and the clear cellophane film were the most effective to increase the number and the fresh weight of formated tuber and the green spectrum was the least effective to do those. Plant height grown at 0-5cm water depth was shorter than that at 10-20cm water depth. The deeper the water depth was, the lower the leaves number was. The fresh weight and the number of arrowhead tuber were most produced at 0cm water depth and theose were least at 20cm water depth. The shoot growth and the tuber formation of arrowhead was much increased with increase of the application rate of fertilizer. The difference of the transplanted tuber size was not affected at the shoot growth, but tuber formation of arrowhead was increased with increase of the transplanted tuber size. From viewing the effect of temperature after rice heading, the shoot growth and the tuber formation at $35^{\circ}C$ were also higher than those at $25^{\circ}C$.