• Safety and Health at Work
• /
• 제2권2호
• /
• pp.97-104
• /
• 2011

N,N-Dimethylformamide (DMF) is globally used as an organic solvent in the production of synthetic leather and resins because of its low volatility, making it an attractive industrial material. Despite its excellent property as a chemical solvent, utilization of DMF is somewhat controversial nowadays due to its hazardous effects on exposed workers in work places. Many toxification cases are being reported globally and the number of cases of liver damage is still increasing in developing countries. On account of this, a series of epidemiologic surveys are being conducted to understand the degrees of liver damage caused by DMF exposure. Furthermore, many investigations have been performed to clarify the mechanism of DMF-induced liver toxicity using both human and experimental animal models. This review summarizes the current occupational cases reported on liver damage from workers exposed to DMF in industrial work places and the research results that account for DMF-induced liver failure and possible carcinogenesis. The findings reviewed here show the synergistic toxicity of DMF exposure with other toxicants, which might occur through complicated but distinct mechanisms, which may extend our knowledge for establishing risk assessments of DMF exposure in industrial work places.

• 한국산업보건학회지
• /
• 제24권2호
• /
• pp.238-245
• /
• 2014

Objectives: It was known that workers in synthetic leather company are mainly co-exposed to dimethylformamide(DMF) with methyl ethyl ketone(MEK) or toluene(TOL) instead of a single dimethylformamide. This study was examined to the physico-chemical properties in single DMF and binary mixture DMF with MEK or TOL. Materials: Physico-chemical properties were measured by Korean and American Standard Test Methods. Results: Boiling point, specific gravity and flash point in single DMF were significantly higher than binary mixture DMF with MEK or TOL and such difference was dependent on the mixing ratio of MEK and TOL, and low explosion limit in binary mixture DMF with TOL was only significantly lower than single DMF. However, Reid vapor pressure had significantly higher in binary mixture DMF with MEK or TOL compared with single DMF. Conclusions: Our results demonstrate that the binary mixture DMF with MEK or TOL synergistically increases volatilization of DMF. It was concluded that the interaction between DMF and MEK and/or TOL might play a key role in the volatilization process of DMF under environmental conditions of workplace.

• 한국대기환경학회지
• /
• 제26권4호
• /
• pp.357-366
• /
• 2010

The purpose of this study is to evaluate a method for the measurement of N,N-Dimethylformamide (DMF) and to apply the method to the ambient air samples. For the determination of DMF together with other general VOCs (e.g., benzene, toluene, and xylenes), adsorption sampling and thermal desorption with GC/MS was used in this study. The sampling and analytical approaches tested in this study showed a good repeatability and linearity with lower detection limits of less than 0.35 ppb. Field measurements were carried out at three industrial sites (Daegu-Seongseo, Siwha and Banwall industrial complexes) and one residential site in Daegu city during a period from October 2006 to November 2008. DMF was detected in 71.8% of the total samples from the Seongseo industrial complex, well known for textile industry. In contrast, DMF was detected in only 20.4% and 12.9% of all the samples from the other two sites in Banwall and Siwha industrial complexes, respectively. This implies that sources of DMF should be strongly associated with textile industry. The mean concentration of DMF also appeared to be the highest in Seongseo site (5.95 ppb), followed by a residential site in Daegu (3.28 ppb), Banwall (0.88 ppb) and Siwha (0.55 ppb). In this study, we demonstrated the environmental significance of DMF in urban ambient air. To our knowledge, the DMF measurement introduced in this paper is the first case of an official report in Korea.

• Toxicological Research
• /
• 제29권3호
• /
• pp.187-193
• /
• 2013

The effects of toluene in dimethylformamide (DMF)-induced hepatotoxicity were investigated with respect to the induction of cytochrome P-450 (CYP) and the activities of related enzymes. The rats were treated intraperitoneally with the organic solvents in olive oil (Single treatment groups: 450 [D1], 900 [D2], 1,800 [D3] mg DMF, and 346 mg toluene [T] per kg of body weight; Combined treatment groups: D1+T, D2+T, and D3+T) once a day for three days, while the control group received just the olive oil. Each group consisted of 4 rats. The activities of the xenobiotic metabolic enzymes and the hepatic morphology were assessed. The immunoblots indicated that the expression of CYP2E1 was considerably enhanced depending on the dosage of DMF and the CYP2E1 blot densities were significantly increased after treatment with both DMF and toluene, compared to treatment with DMF alone. The activities of glutathione-S-transferase and glutathione peroxidase were either decreased or remained unaltered after treatment with DMF and toluene, whereas the lipid peroxide levels were increased with increasing dosage of DMF and toluene. The liver tissue in the D3 group (1,800 mg/kg of DMF) showed signs of microvacuolation in the central vein region and a large necrotic zone around the central vein, in rats treated with both DMF (1,800 mg/kg) and toluene (D3T). These results suggest that the expression of CYP2E1 is induced by DMF and enhanced by toluene. These changes may have facilitated the accelerated formation of N-methylformamide (NMF) from toluene, and the generated NMF may directly induce liver damage.

• 한국산업보건학회지
• /
• 제32권2호
• /
• pp.102-110
• /
• 2022

Objectives: The purpose of this study is to analyze the content of N,N-dimethylformamide(DMF) in polyurethane coated gloves(PU-gloves) and to assess the dermal exposure generated by wearing them. Methods: We analyzed the concentrations of DMF in 12 gloves by EN16778 standard. The samples cut into pieces of about 10 by 10 mm and extracted with methanol in flask in an ultrasonic bath at 70℃. An aliquot of the extract is analyzed with GC-MS. The dose of dermal exposure was calculated by ECETOC TRA consumer 3.1 and compared with derived no effect level(DNEL) for systemic effects due to long term exposure by workers. The extracted amount of DMF by saline solution was compared with that by EN16778 standard. Results: The mean concentration of DMF in PU-gloves was 1,377 mg/kg(range 13~3,948 mg/kg). The concentration of DMF showed significantly differences by packing type, manufacturer, and price(p<0.05). The dose of dermal exposure was 0.0007~0.572 mg/kg body weight/day when the DMF content was 10~4,000 mg/kg. The DMF extracted by saline solution was around 11% for 8 hours. Conclusions: The risk of dermal exposure due to the residual DMF in the PU-gloves was not signifiant. But, the limit of 1,000 mg/kg in PU-gloves can be recommended for international standard and trading systems.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.769-780
• /
• 2017

Purpose: The aim of this study is to conduct a survey of dimethylformamide(DMF) content in polyurethane(PU)-based consumer products and provide the information for the PU manufacturer and company to prepare a countermeasure for improving the quality competitiveness. Methods: This study selected PU-based consumer products(toddler shoes, children's bag, children's play mat, safety gloves), which is closely used in everyday life, and analyzed the residual DMF content in the consumer products. Results: In this study, it was confirmed that the average DMF content of toddler shoes, children's bag, children's play mat and safety gloves are 38 ppm, 119 ppm, 396 ppm and 826 ppm, respectively. In addition, most of the samples were found to meet the internationally accepted standard of 1,000 ppm and the DMF contents were reduced from at least 63 % to 85 % with a single washing process. Conclusion: The domestic PU manufacturers should seek ways to reduce the DMF through their production facility applications and introducing new materials such as water-soluble PU, and preparing the process development for their quality competitiveness.

• Journal of Preventive Medicine and Public Health
• /
• 제39권2호
• /
• pp.171-176
• /
• 2006

Objectives : The objective of this study is to assess the factors influencing biological monitoring of textile coating factory workers exposed to N,N-dimethylformamide(DMF). Methods : We studied 35 workers who were occupationally exposed to DMF from 9 textile coating factories. The study was carried out in two phases; summer and winter. While air concentration of DMF, temperature and humidity were assessed in order to monitor the atmospheric conditions, biological monitoring was done to determine the internal dose by analyzing the N-methylformamide(NMF) collected from urine at the beginning and end of the shift. Questionnaires and medical surveillance were also obtained during the two phases. Results : Median air concentrations of DMF in winter and summer were 1.85 ppm and 2.78 ppm respectively. Also the difference between the urinary NMF concentration at the beginning and end of the shift $({\Delta}NMF)$ was always significant in each season (P < 0.001). The correlations between log DMF in air, log end-of-shift urinary NMF (r=0.555, P < 0.001) and log ${\Delta}NMF$ (r = 0.444, P < 0.001) was statistically significant in summer. The temperature, humidity, a shift system and different styles of clothing worn were significantly different during the two phases. In a multivariate analysis, temperature and the concentration of DMF in the air were the main factors influencing biological monitoring of textile coating factory workers. Conclusions : Concerning more comprehensive prevention measures to reduce exposure for those workers occupationally exposed to DMF, dermal exposure conditions such as temperature and humidity together with the air concentration of DMF should be assessed and biological monitoring is necessary to reduce adverse health effects, especially during the summer.

• 대한화학회지
• /
• 제37권8호
• /
• pp.730-734
• /
• 1993

비양성자성 용매인 N,N-dimethylformamide(DMF) 중에서 Biliverdin(BV)의 전기화학적인 환원거동을 직류폴라로그래프법, 순환전압전류법 및 정전위 전기량법으로 조사하였다. 또한 BV의 최종 환원생성물을 UV-Vis spectroscopy로 조사하였다. DMF 용매 중에서 BV는 -0.71 V vs. Ag/Ag$^+$와 -0.91 V vs. Ag/Ag$^+$ 에서 2개의 환원파를 보였다. 각 환원파의 전류유형은 제 1환원파는 확산지배적인 전류였으며, 제 2환원파는 반응성 전류가 약간 포함된 확산전류이었다. 그리고 제 1단계의 환원과정은 비가역적이었다. 각 환원단계에 관여하는 전자수는 1개씩 이었으며, BV은 DMF 용액 중에서 1전자 2단계의 환원과정을 거쳐서 Bilirubin으로 환원되었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1424-1426
• /
• 2010

• Toxicological Research
• /
• 제30권3호
• /
• pp.199-204
• /
• 2014

The aim of this research was to improve our understanding of human toxicity due to exposure to DMF, MEK, or TOL individually as compared to exposure to DMF-MEK or DMF-TOL mixtures, by comparing $EC_{50}$ values as well as the morphological changes in HepG2 cells treated with these substances. We found that there was marked cell necrosis in the groups treated with mixtures than in those treated with the compounds alone, and that the amount of cell death and the $EC_{50}$ value were more dependent on MEK and TOL than on DMF. Moreover, analysis of the changes in effective concentration curves revealed that MEK had an antagonistic effect on the human toxicity of DMF, whereas TOL had a synergistic effect. Accordingly, these results suggest that in workplaces involved in the manufacture of synthetic leather, mixtures of DMF and TOL should be avoided as much as possible in order to minimize environmental toxicity and protect the health of the workers.