• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1205-1215
• /
• 2002

To evaluate the change for water quality after the water gate operation in Shiwha lake, in situ survey were conducted on september in 2000 and January, march, jane in 2001. Chemical characteristics and eutrophication level was estimated from the survey data. The water quality of the Shihwa lake was greatly affected by pollutant load from rainfall, and formation of stratification in summer and winter was increased to effect on nutrient release from sediment. Especially, high concentration of chlorophyll-a was occurred in autumn, due to increased nutrient, high water temperature and low salinity after rainfall runoff. The mean concentration of DIN, DIP were 0.346mg/L, 0.0217mg/L in surface water and 0.826mg/L, 0.0415mg/L in bottom water, respectively, which were over III grade of seawater standard. Also high percentage of ammonia nitrogen to DIN in bottom water for autumn and winter was affected by released nutrient from sediment. Correlation analysis of chlorophyll-a versus TSS was shown that organic matter was affected by autochthonous organic matter stem from the algae, these factor showed reverse correlation about salinity. Closely correlations among to the water quality constituent in continuity survey was appeared. The results of eutrophication index estimation showed the high potentiality of red tide occurrence in Shiwha lake, particularity in summer or fall. Overall water quality was greatly improve to compared with measuring data during 1997~1998 at the beginning water gate operation, which reported by KORDI. Therefore, to improve of water quality in Shiwha lake, we need to establish of management plan about nutrient release from sediment, rainfall runoff, maximum of seawater exchange.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.2
• /
• pp.74-80
• /
• 2015

To assess environmental characteristics of the aquaculture area in Tongyeong, pH, dissolved oxygen (DO), dissolved inorganic nitrogen (DIN), dissolved inorganic phosphorous (DIP) and chemical oxygen demand (COD), and acid volatile sulfur (AVS) were measured in seawater and sediment samples collected from 10 locations of Tongyeong coastal area from July to December in 2013. The quality of the seawater may be affected by seasonal variation rather than the distance from fish farm. However, sediment was contrary to seawater; the distance from fish farm may be a main factor to affect COD and AVS in sediment than season and other parameters. It is expected that contaminated organic sediments of fishery located in semi-closed bay are rapidly dispersed into surrounding waters due to fast current.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2000

A three-dimensional hydrodynamic-ecosystem model was developed and applied to Chinhae Bay which is located in the southeastern sea of Korea. The model includes a three-dimensional hydrodynamic model and an eutrophication model, and the model operates on the same grid system. The agreement between predicted and measured results is reasonably encouraging. The concentrations of the calculated COD, DIN and DIP are appeared to be very high due to the phytoplankton production and the wastewater input in the northern part of Chinhae Bay. Anoxic and hypoxic water masses in the bottom layer occur in the northern part of the bay due to the excess loading of wastewater and strong stratification, and in the western inner part of the bay due to high oxygen consumption in densely populated aquaculturing facilities. DO concentration contours show parallel to the bay entrance line, which means the importance of supplying DO by physical process from the mouth of the bay. Although both the hydrodynamic and biochemical processes play important role to form the hypoxic waters in the bottom of the inner bay, it is suggested that the hydrodynamic conditions such as the vertical and the horizontal eddy diffusivity are primarily important factors.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.5
• /
• pp.540-546
• /
• 2010

We investigated variations in alkaline phosphatase (APase) activity and alkaline phosphatase hydrolyzable phosphorus (APHP) in northern Gamak Bay from September to December 2009. Dissolved inorganic nitrogen (DIN) and dissolved inorganic phosphorus (DIP) decreased gradually, and the DIN/DIP ratio was higher than the Redfield ratio (16) based on molecular concentrations during most of the observation period. The total APase (T-APase) activity increased with decreasing DIP concentration; i.e., the Relationship between T-APase and DIP showed a high negative correlation (r=-0.80, P<0.001), with APase activity being a good indicator of DIP limiting the Redfield ratio. The T-APase was positively correlated with the concentration of chlorophyll a (r=0.73, P<0.001). This suggests that a major portion of APase activity in northen Gamak Bay seawater is attributed to phytoplankton. The proportion of APHP among dissolved organic phosphorus (DOP) was low in September and high in November. Thus, APase-producing phytoplankton may be able to grow by utilizing APHP as a phosphorus source in autumn when DIP is limiting. Thus, APase activity and the use of DOP by phytoplankton may play an important role in the growth of phytoplankton under DIP limiting conditions such as those of northern Gamak Bay.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1176-1181
• /
• 1998

Characteristics of high frequency induction- hardened bearing steel have been investigated using 0.55wt.% C-1.68wt.% Mn specimens produced by vacuum induction melting (VIM). The K4 value in DIN 57602 of the specimens was assessed to be 6.41, high level of cleanliness. The specimens were high frequency induction-hardened to form heterogeneous submicron- lath martensite in the surface hardened layer with about 2.5mm in effective depth. Rolling contact fatigue tests were conducted in elasto-hydrodynamic lubricating conditions under a maximum Hertzian contact stress of$ 492kgmm^{-2}$ . It was found that microhardness in the subsurface, up to about $500\mu\textrm{m}$ in depth, below the raceway of rolling contact fatigued specimens was increased in comparison with that of induction-hardened layers. The depth of maximum microhardness- increased region was about $100\mu\textrm{m}$ from surface, showing white etching area. Crack initiation and propagation in the white etching area below the raceway of rolling contact fatigued specimens were observed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.5
• /
• pp.685-694
• /
• 1998

To evaluate the water quality characteristic after construction of Keum river estuary barrage, water quality analysis were conducted on August October in 1995 and January, May in 1996 respectively. The results were summarized as follows. The concentrations of COD were in the range of 1.01~5.10 (mean 2.50)mg/$\ell$ for surface water and 0.51$\~$6.68 (1.88)mg/$\ell$ for bottom water. The concentrations of dissolved inorganic nitrogen (DIN) were in the range of 1.26$\~$105.91 (29.66)$\mu$g-at/$\ell$ for surface water and 1.42$\~$68.38 (19.12)$\mu$g-at/$\ell$ for bottom water. The concentrations of phosphate phosphorus were in the range of ND$\~$0.99 (0.34)$\mu$g-at/$\ell$ for surface water and 0.17$\~$1.04 (0.49)$\mu$g-at/$\ell$ for bottom water. The nitrogen ratio to the phosphorus were as high as 3.5$\~$849.5 (146.5). Therefore, Phosphate phosphorus was playing an important role in phytoplankton growth as limiting factor in Keum river estuary. The correlation coefficient of salinity and DIN according to COD was shown to -0.757 and -0.874 respectivity. Mean values of eutrophicaton indies were calculated to 9.7, 7.2 for surface and bottom water, these values were exceeding 1, the value of eutrophication criteria. Especially station 1$\~$3 were shown over 10 as eutrophication indices. Therefore, Keum river estuary could be evaluate to possibility area for breakout of red tides.

• Clean Technology
• /
• v.13 no.2
• /
• pp.87-98
• /
• 2007

As the interest in environmental problems increased, the guideline of effluent qualities becomes strict and the amount of sludge produced from the wastewater treatment facilities steeply increased. The revised Korean acts prohibit the direct reclamation of the sludge exhausted in sewage treatment works from 2003, and the ocean dump of sludge will be also prohibited from 2012. Therefore, the sludge must be recycled, incinerated or composted. To properly perform the utilization and disposal operations, the establishment of well-defined procedures for the characterization of sludge by physical, chemical and biological method and setting up of guidelines for different treatment and disposal routes has become necessary. However, there have not been such standardized methods for sludge characterization in Korea. This review analyzes the present status of establishment and problems of sludge characterization method of Korea. Finally, it was proposed total 15 items of standardized characterization methods suitable to our country for proper sludge recycling and disposal, which was based on the more systematic standard methods of Germany (DIN 38414) and those of advanced nations.

• Geotechnical Engineering
• /
• v.11 no.4
• /
• pp.5-12
• /
• 1995

Although the pile Load test provides various informations to predict the bearing capacity of a pile, it has a considerable difficulty of requiring a large amount of weight to enable the test pile to be loaded sufficiently until the yielding or ultimate load is obtained. Many graphical and mathematical methods have been attempted to estimate the bearing capacity from the result of a vertical load test without loading to failure. In the previous work an analytical method to estimate the failure load using the maxi mum curvature which was based on the Southwell's theory was presented by the author. The failure load, as proposed by Crowther, should be defined as the load at which the predefined that criteria are exceeded. The allowable loads by Davisson's method and DIN 4014 were compared with the loads of piles using the maximum curvature, and this paper proposed the allowable load in which the safety factor of the maximum curvature was 2.5. As a result of study, it was reasonable to conclude that the allowable load determined by the maximum curvature method could estimate the vertical bearing capacity from the pile load test without loading to failure.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.43-50
• /
• 2018

In this study, to investigate the shear connection material for the composite of steel plate and bottom plate, design standards and research cases for shear connectors in various countries around the world were analyzed and shear tests were performed on the Push-out specimens with a shear connection, which transmits the horizontal shear force developed on the contact surface between the steel plate and the concrete slab due to various vertical loads acting on the bridge deck. Through Push-out tests of shear studs, of which FRP bar instead reinforcement is placed, the shear stud evaluation formula of the steel strap bottom plate was suggested. The suggested equation suggested in this study has the safety factor of approximately three times compared to allowable strength of highway bridge design criteria. In addition, compared to existing DIN standards and Viest assessment equation, the results showed similar values(approximately, 5% error).

• Journal of the Korea Convergence Society
• /
• v.10 no.5
• /
• pp.17-26
• /
• 2019

We aimed to build a patient-based allergy prevention system using the smartphone and focused on the region of interest (ROI) extraction method for Optical Character Recognition (OCR) in the general environment. However, the current ROI extraction method has shown good performance in the experimental environment, but the performance in the real environment was not good due to the noisy background. Therefore, in this paper, we propose the compared methods of reducing noisy background to solve the ROI extraction problem. There five methods used as a SMF, DIN, Denoising Autoencoder(DAE), DAE with Convolution Neural Network(DAECNN) and median filter(MF) with DAECNN (MF+DAECNN). We have shown that our proposed DAECNN and MF+DAECNN methods are 69%, respectively, which is relatively higher than the conventional DAE method 55%. The verification of performance improvement uses MSE, PSNR and SSIM. The system has implemented OpenCV, C++ and Python, including its performance, is tested on real images.