• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.5
• /
• pp.443-450
• /
• 2013

We consider user pairing and resource allocation for the uplink of cellular systems employing virtual multiple input multiple output (MIMO). As a multiple access scheme, discrete Fourier transform spread orthogonal frequency division multiple access (DFTS-OFDMA) is adopted for more flexible resource allocation than single carrier (SC)-OFDMA adopted in the Long Term Evolution (LTE) system. We formulate the optimization problems of user pairing and resource allocation to maximize the throughput of the DFTS-OFDMA system under different constraints. The DFTS-OFDMA allowing non-contiguous subcarrier allocation and redundant user assignment provides a better throughput than the SC-FDMA at lower complexity in finding the optimal solution but at the cost of the increased control information indicating the allocated resources.

• Journal of the Korean Society of Safety
• /
• v.31 no.6
• /
• pp.45-51
• /
• 2016

The purpose of this study is to investigate the influence of train-induced end rotation of simple supported track girder on the performance of a direct fixation track system (DFTS) in Yeongjong grand bridge. In this study, the influences of deflection of a DFTS and track girder on dynamic rail-track girder interaction forces for the track girder ends currently employed in airport express lines were assessed by performing field tests using actual vehicles running along the service lines. Therefore, the dynamic displacement of rail and track girder and the fastener stress on the center and ends sections of DFTS were measured for two different trains (AREX and KTX) running in Yeongjong grand bridge. A three-dimensional finite element analysis (FEA) model using the time-history function based on the design wheel load was used to predict the train-induced track and track girder displacement, and the FEA and field test results were compared. The analytical results reproduced the experimental results well within about 3-7% difference in the values. Therefore, the FEA model of DFTS on track girder is considered to provide sufficiently reliable FEA results in the investigation of the behavior of DFTS. Using the analytical and experimental results, the influence of train-induced end rotation of simple supported track girder on the interaction behavior of rail and track girder installed on a simple supported track girder ends, i.e., upward displacement of rail-track girder and the fastener stress, was investigated. It was found that the train-induced end rotation effect of track girder was not significantly affected by the upward displacement of rails and the fastener stresses of track girder ends. Further, the interaction behavior of rail and track girder were similar to or less than that of the general railway bridge deck ends, nevertheless the vertical displacement of track was higher than that of conventional DFTS on the general railway bridge. From the results, the dynamic responses of the DFTS on track girder ends were not significantly affected by the safety and stability of DFTS ends.

• Journal of Veterinary Clinics
• /
• v.33 no.1
• /
• pp.1-5
• /
• 2016

Septic tenosynovitis of the digital flexor tendon sheath (DFTS) is a potentially career-ending and life-threatening problem in horses. This study aimed to describe the outcomes of tenoscopy for the treatment of acute septic digital flexor tenosynovitis in horses. Tenoscopy was performed on 13 Thoroughbred horses with acute septic tenosynovitis of the DFTS. Surgical time was 56-148 min (mean 85.6 min, median 84.0 min). In the synovial fluid analysis, mean white blood cell count, mean neutrophil proportion, and mean total protein were $42.9{\times}10^3cells/{\mu}l$ (range, $7.2-109.5cells/{\mu}l$), 89.5% (range, 68-97%), and 4.0 g/dl (range, 2.5-5.2 g/dl), respectively. Microbial growth in the synovial fluid culture was detected in 2 of 11 horses. All horses survived and returned to their intended use without complications. The present study demonstrated that the tenoscopy is useful for treating acute septic tenosynovitis of the DFTS in horses.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.147-150
• /
• 2004

In this paper, we propose a reduced-state sequence estimation (RSSE) for trellis coded modulation (TCM) in OFDM with two-stage IDFT/ DFTs, MMSE-LE, and interleaving on frequency selective Rayleigh fading channels. The Viterbi algorithm (VA) is used to search for the best path through the reduced-state trellis combined with equalization and TCM decoding. Computer simulations confirm the bit error probability of the proposed scheme.

• Applied Biological Chemistry
• /
• v.33 no.4
• /
• pp.301-306
• /
• 1990

The Physical and chemical properties or dry acorn starch(DS), detannined acorn starch (DTS) and defatted and detannined acorn starch(Drn) were investigated. Ail acorn starch sample, observed by a scanning electron microscope, showed a hemispherical shape ud its size was about $5{\sim}10{\mu}m$ in diameter. It had a little change on the pasting temperature of DS, DTS and DFTS but peak viscosity of DTS was somewhat higher than that of n. Flow behavior of gelatinized starch pastes showed a pseudoplastic behavior and flow behavior index was lower than unit. The consistency coefficient showed concentraion and temperature dependency. The activation energies of DS, DTS and DFTS were $2.09{\sim}3.58Kcal/g\;{\cdot}\;mol and time dependent characteristic of acorn starch samples showed thixotrpic behavior.

• The KIPS Transactions:PartA
• /
• v.12A no.3 s.93
• /
• pp.215-222
• /
• 2005

The efficient utilization of cache memories is a key factor in achieving high performance for computing large signal transforms. Nonunit stride access in computation of large DFTs causes cache conflict misses, thereby resulting in poor cache performance. It leads to a severe degradation in overall performance. In this paper, we propose a dynamic data layout approach considering the memory hierarchy system. In our approach, data reorganization is performed between computation stages to reduce the number of cache misses. Also, we develop an efficient search algorithm to determine the optimal tree with the minimum execution time among possible factorization trees considering the size of DFTs and the data access stride. Our approach is applied to compute the fast Fourier Transform (FFT). Experiments were performed on Pentium 4, $Athlon^{TM}$ 64, Alpha 21264, UtraSPARC III. Experiment results show that our FFT achieve performance improvement of up to 3.37 times better than the previous FFT packages.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.790-794
• /
• 2007

This paper presents a new index mapping method for DFT (Discrete Fourier Transform) and its application to multidimensional DFT. Unlike conventional index mapping methods such as DIT (Decimation in Time) or DIF (Decimation in Frequency) algorithms, the proposed method is based on two levels of decomposition and it can be very efficiently used for implementing multidimensional DFT as well as 1-dimensional DFT. The proposed pipelined architecture for multidimensional DFT is very flexible so that it can lead to the best tradeoff between performance and hardware requirements. Also, it can be easily extended to higher dimensional DFTs since the number of CEs (Computational Elements) and DCs (Delay Commutators) increase only linearly with the dimension. Various implementation options based on different radices and different pipelining depths will be presented.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.2
• /
• pp.163-170
• /
• 2012

This paper presents a DFT (Discrete Fourier Transform) based estimation algorithm for the parameters of a low-frequency oscillating signal. The proposed method estimates the parameters, i.e., the frequency, the damping factor, the mode amplitude, and the phase, by fitting a discrete Fourier spectrum with an exponentially damped cosine function. Parameter estimation algorithms that consider the spectrum leakage of the discrete Fourier spectrum are introduced. The multi-domain mode test functions are tested in order to verify the accuracy and efficiency of the proposed method. The results show that the proposed algorithms are highly applicable to the practical computation of low-frequency parameter estimations based on DFTs.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.136-141
• /
• 2009

An AC generator is an important components in producing a electric power and so it requires highly reliable protection relays to minimize the possibility of demage occurring under fault conditions. Conventionally, a DFT based RDR has been used for protecting the generator stator winding. However, when DFTs based on Fourier analysis are used, it has been pointed out that defects can occur during the process of transforming a time domain signal into a frequency domain one which can lead to loss of time domain information. This paper proposes the internal fault detection and fault type discrimination for the stator winding by applying the detailed coefficients by Daubechies Wavelet Transform to overcome the defects in the DFT process. For the case studies reported in the paper, a model system was established for the simulations utilizing the ATP, and this verified the effectiveness of the proposed technique through various off-line tests carried out on the collected data. The propose method is shown to be able to rapidly identify internal fault and did not operate a miss-operation for all the external fault tested.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.2275-2293
• /
• 2020

This paper focuses on the simplified receiver design for multi-user circular block oversampled filter bank (CB-OSFB) uplink systems. Through application of discrete Fourier transform (DFT), the special banded structure and circular properties of the modulation matrix in the frequency domain of each user are derived. By exploiting the newly derived properties, a simplified zero-forcing (ZF) receiver is proposed for multi-user CB-OSFB uplink systems in the multipath channels. In the proposed receiver, the matrix inversion operation of the large dimension multi-user equivalent channel matrix is transformed into DFTs and smaller size matrix inversion operations. Simulation is given to show that the proposed ZF receiver can dramatically reduce the computational complexity while with almost the same symbol error rate as that of the traditional ZF receiver.