• Journal of Power Electronics
• /
• v.9 no.1
• /
• pp.109-116
• /
• 2009

This paper addresses the output control of a utility-connected double-fed induction machine (DFIM) for wind power generation systems (WPGS). DFIM has a back-to-back converter to control outputs of DFIM driven by the wind turbine for WPGS. To supply commercially the power of WPGS to the grid without any problems related to power quality, the real and reactive powers (PQ) at the stator side of DFIM are strictly controlled at the required level, which in this paper is realized with the Fuzzy PI controller based on the field orientation control. For the Sinusoidal Pulse Width Modulation (SPWM) converter connected to the rotor side of DFIG to maintain the controllability of PQ at the state side of DFIM, the DC voltage of the DC link capacitor is also controlled at a certain level with the conventional Proportion-Integral (PI) controller of the real power. In addition, the power quality at the grid connected to the rotor side of DFIM through the back-to-back converter is maintained in a certain level with a PI controller of the reactive power. The controllers for the PQ at the stator side of DFIM, the DC link voltage of the back-to-back inverter and the reactive power at the grid connected to the rotor side of DFIM are designed and simulated in the PSIM program, of which the result verifies the performance of the proposed controllers.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.4
• /
• pp.521-526
• /
• 2009

In this paper we are interested in the control of Doubly Fed Induction Machine (DFIM) using the Passivity Based Control (PBC). This work presents a solution to the problem of DFIM that requires a state observer. The proposed method shows very important advantages for nonlinear systems, especially in the trajectory tracking to achieve the needed DFIM performance. In the obtained results, the passivity provides high efficiency in DFIM based system, namely in its stability and robustness. An improvement behavior has been observed in comparison to the results given by the RST controller.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.5
• /
• pp.425-430
• /
• 2022

A pumped storage power station is an important means to solve the problem of peak load regulation and ensures the safety of power grid operation. The doubly fed variable-speed pumped storage (DFVSPS) system adopts a doubly fed induction machine (DFIM) to replace the synchronous machine used in traditional pumped storage. The stator of DFIM is connected to the power grid, and the three-phase excitation windings are symmetrically distributed on the rotor. Excitation current is supplied by the converter. The active and reactive power of the unit can be quickly adjusted by adjusting the amplitude, frequency, and phase of the rotor-side voltage or current through the converter. Compared with a conventional pumped storage hydropower station (C-PSH), DFVSPS power stations have various operating modes and frequent start-up and shutdown. This study introduces the structure and principle of the DFVSPS unit. Mathematical models of the unit, including a model of DFIM, a model of the pump-turbine, and a model of the converter and its control, are established. Fast power control strategies are proposed for the unit model. A 300 MW model of the DFVSPS unit is established in MATLAB/Simulink, and the response characteristics in generating mode are examined.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.40-44
• /
• 1998

This paper describes variable speed drive and power control of a doubly fed induction machine(DFIM) for wind energy generation without rotational transducers. A stator flux orientation scheme and rotor speed estimator are employed to achieve decouple control of active and reactive power. To verify the theoretical analysis, a 5-hp DFIM prototype system and PWM power converter are built. Results of computer simulation are presented to support the discussion.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.308-313
• /
• 2008

This article proposes the study and simulation of an RST regulator based on a double fed induction machine. The RST polynomial controller can improve the double fed induction machine performance in terms of overshoot, rapidity, cancellation of disturbance, and capacity to maintain a high level of performance. A control law is synthesized using an RST controller. Simulation results indicate that the proposed regulator has better performance response to speed variation, sensitivity to perturbation, and robustness. The designed control algorithm is tested on a simulation matlab code.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.5
• /
• pp.451-458
• /
• 2000

In wind power generating system connected in power grid, the value of stator flux has almost constant because the stator side of doubly fed induction machine(DFIM) is connected to power grid. Using the stator and rotor current, it is possible to estimate the slip angle and rotor speed. A stator flux orientation scheme and rotor slip estimator are employed to achieve control of generating power in stator side. To verify the theoretical analysis, a 5-hp DFIM prototype system and PWM power converter are built. Results of computer simulation and experiment are presented to support the discussion.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.491-498
• /
• 2008

In this paper a decoupled control of a doubly-fed induction machine(DFIM) feed by a matrix converter is presented. It provides a robust regulation of the stator side active and reactive powers by the direct and quadratic components of the stator current vector, presented in a line-voltage-oriented reference frame. In this case, the stator windings are directly connected to the line grid, while the rotor windings are supplied by this later through a matrix converter controlled by a space vector modulation technique. The proposed solution is suitable for both energy generation and electrical drive applications with restricted speed variation range.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.276-277
• /
• 2010

This paper describes the control of a utility-connected doublefed induction machine (DFIM) for wind power generation systems (WPGS). Real and reactive powers (PQ) at the stator side of DFIM are strictly controlled to supply the power to the grid without any problems. In this paper the control is realized using Fuzzy PI controller based on the stator-flux orientation control.

• Journal of Power Electronics
• /
• v.11 no.5
• /
• pp.719-725
• /
• 2011

This paper describes a novel Direct Torque Control (DTC) method for adjustable speed Doubly-Fed Induction Machine (DFIM) drives which is supplied by a two-level Space Vector Modulation (SVM) voltage source inverter (DTC-SVM) in the rotor circuit. The inverter reference voltage vector is obtained by using input-output feedback linearization control and a DFIM model in the stator a-b axes reference frame with stator currents and rotor fluxes as state variables. Moreover, to make this nonlinear controller stable and robust to most varying electrical parameter uncertainties, a two layer recurrent Artificial Neural Network (ANN) is used to estimate a certain function which shows the machine lumped uncertainty. The overall system stability is proved by the Lyapunov theorem. It is shown that the torque and flux tracking errors as well as the updated weights of the ANN are uniformly ultimately bounded. Finally, effectiveness of the proposed control approach is shown by computer simulation results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.1
• /
• pp.72-78
• /
• 2000

본 논문에서는 이중여자 유도기를 풍력발전에 적용할 때 회전자위치 센서를 사용하지 않고 발전 출력제어 방법을 제안하였다. 모델기를 풍력발전에 적용하여 운전할 때 고정자는 계통선에 연결되어 있기 때문에 고정자 자속은 일정 값을 가지며 고정자 자속의 동기 각\ulcorner고는 일정한 상수값을 가진다. 또한 회전자 전류 및 고정자 전압과 전류를 이용하여 슬립각을 추정함으로써 속도를 추정할 수 있고 뿐만 아니라 회전자 전류제어에 의해 고정자측의 발전전력을 제어할 수가 있다. 이른 토대로 속도제어 및 발전출력에 대한 결과를 나타내므로써 제안한 알로리즘의 타당성을 입증하였다.