• Korean Journal of Environmental Biology
• /
• v.39 no.1
• /
• pp.1-5
• /
• 2021

Radish is one of the major vegetable crops and has been damaged economically by the causal agent of Fusarium wilt disease, Fusarium oxysporum f. sp. raphani (FO) in the highlands of Gangwon province, Korea. Recently, clover cyst nematode, Heterodera trifolii(HT), occurred in highland of Jeongseon area and poses a threat to radish plants. The nematodes, besides causing direct damage to radish plants, possess the capability to synergize with other plant pathogens, leading to the development of a disease complex. The aim of this study was to investigate the interaction between FO and HT in radish plants. The length of plants co-infected with both FO and HT was shorter than that of plants infected with FO alone, but there was no statistically significant difference. However, the disease severity was much higher in the plants co-infected with both FO and HT(1.60±0.97) compared to FO alone(0.20±0.42)(df=3, F=10.17, p<0.001). Disease incidence was also about two-fold higher in plants co-infected with both FO and HT (80%) compared to FO alone (44%). These results suggested that the clover cyst nematode should be considered in the management of Fusarium wilt disease in the highlands of Gangwon province.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.4
• /
• pp.279-286
• /
• 2020

The objective of this study was to assess the impact of El Niño on highland kimchi cabbage production for the period from 1991-2016 in South Korea. Years with less than 1.0 Oceanic Niño index (ONI) were classified into non El Niño years, while years with equal to or greater than 1.0 ONI were defined as El Niño years. The national average production (3,444 kg 10a-1) of high kimchi cabbage in El Niño years tended to be less than that in non El Niño years (3,722 kg 10a-1) with significant differences (p = 0.0042) in the production between these groups of years. The averaged production of highland kimchi cabbage of El Niño end years (3,289 kg 10a-1) was less than those of El Niño start years and non El Niño years by 310 and 433 kg 10a-1, respectively. Such difference was significant statistically (p=0.035). According to our analysis, the differences in kimchi cabbage productions resulted from low temperature, short sunshine duration, and precipitation increase during the cultivation period of highland kimchi cabbage. This study may help for further analysis on the impact of extreme weather conditions during El Niño years on crop production.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.4
• /
• pp.305-314
• /
• 2022

Introduction: This clinical trial aimed to evaluate the anesthetic effect of the addition of 2 mg (4 mg/ml) of dexamethasone to 2% lidocaine (plain or with 1:80,000 epinephrine). The solutions were injected for a primary inferior alveolar nerve block (IANB) to provide mandibular anesthesia for the endodontic treatment of mandibular molars with symptomatic irreversible pulpitis. Methods: In a double-blinded setup, 124 patients randomly received either of the following injections: 2% lidocaine with 1:80,000 epinephrine, 2% lidocaine with 1:80,000 epinephrine mixed with 2 mg dexamethasone, or plain 2% lidocaine mixed with 2 mg dexamethasone, which were injected as a primary IANB. Ten minutes after injection, patients with profound lip numbness underwent electric and thermal pulp sensibility tests. Patients who responded positively to the tests were categorized as "failed" anesthesia and received supplemental anesthesia. The remaining patients underwent endodontic treatment using a rubber dam. Anesthetic success was defined as "no pain or faint/weak/mild pain" during endodontic access preparation and instrumentation (HP visual analog scale score < 55 mm). The effect of the anesthetic solutions on the maximum change in heart rate was also evaluated. The Pearson chi-square test at 5% and 1% significance was used to analyze anesthetic success rates. Results: The 2% lidocaine with 1:80,000 epinephrine, 2% lidocaine with 1:80,000 epinephrine mixed with 2 mg dexamethasone, and plain 2% lidocaine mixed with 2 mg dexamethasone groups had anesthetic success rates of 34%, 59%, and 29%, respectively. The addition of dexamethasone resulted in significantly better results (P < 0.001, 𝛘² = 9.07, df = 2). Conclusions: The addition of dexamethasone to 2% lidocaine with epinephrine, administered as an IANB, can improve the anesthetic success rates during the endodontic management of symptomatic mandibular molars with irreversible pulpitis.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.359-370
• /
• 2022

Despite continuous efforts to reduce on-site safety accidents, the construction industry remains a high-risk sector with a high rate of fatal accidents. Design for Safety(DFS), which manages safety risk factors at the design stage, is being used as a method to lower the construction safety accident rate. However, due to limited knowledge, designers are unaware of the design-results risks during the different of the project lifecycle, including construction, operation, and maintenance. Effective DFS can be conducted if the designer understands the effect of the building shape on the safety accident rate and corresponding safety management cost(SMC). The cost of safety facilities such as fall prevention nets and safety fences will vary depending on the shape of the building. This study analyzes the outer perimeter length's impact on SMC. Following the data collection from 21 projects for this study, an analysis was conducted using the independent variables of the building perimeter(BP), building shape factor(BSF), and building area(BA), the dependent variable of SMC. The correlation R2 was found to be 0.876, 0.801 and 0.792 between the BP and SMC, BSF and SMC, BA and SMC, respectively, indicating that these factors were closely related.

• Journal of the Korean earth science society
• /
• v.44 no.4
• /
• pp.318-330
• /
• 2023

This study aimed to verify the validity of a measurement tool for Vietnamese high school students' systems thinking abilities. Two quantitative assessment tools, the Systems Thinking Measuring Instrument (Lee et al., 2013) and the Systems Thinking Scale (Dolansky et al., 2020), were used to measure students' systems thinking after translation into Vietnamese. As a result, it was revealed that Cronbach-α for each tool (i.e., STMI and STS) was .917 and .950, respectively, indicating high reliability for both. To validate the construct validity of the translated questionnaire, exploratory factor analysis was performed using SPSS 26.0, and confirmatory factor analysis was performed using AMOS 21.0. For concurrent validity, correlation analysis using structural equation modeling was performed to validate the translated questionnaire. Exploratory factor analysis revealed that 10 items from the STMI and 12 items from the STS loaded on the intended factors and appropriate factor loading values were obtained. For confirmatory factor analysis, a structural equation model organized with 10 items from the STMI and 12 items from the STS was used. The result of this showed that the convergent validity values of the model were all appropriate, and the model fit indices were analyzed to be χ²/df of 1.892, CFI of .928, TLI of .919, SRMR of .047, and RMSEA of .063, indicating that the model consisting of the 22 items of the two questionnaires was appropriate. Analysis of the concurrent validity of the two tools indicated a high correlation coefficient (.903) and high correlation (.571-.846) among the subfactors. In conclusion, both the STMI and STS are valid quantitative measures of systems thinking, and it can be inferred that the systems thinking of Vietnamese high-school students can be quantitatively measured using the 22 items identified in our analysis. Using the tool validated in this study with other tools (e.g., qualitative assessment) can help accurately measure Vietnamese high school students' systems thinking abilities. Furthermore, these tools can be used to collect evidence and support effective education in ODA projects and volunteer programs.

• 한국노년학
• /
• v.29 no.1
• /
• pp.243-258
• /
• 2009

Background: Falls are among the most common and serious health problems of older people. The psychological symptoms of falling have received relatively little attention compared to physical problems. Objective: The purpose of this study is to test a model to explain the factors that influence fear of falling among older adults living in a continuing care retirement community (CCRC) in Baltimore city, United States. Methods: A secondary analysis was conducted using data obtained from a Health Promotion Survey done on 149 older adults living in a CCRC. Data was originally obtained during face to face interviews with each participant. Descriptive statistics and bivariate correlations were used to describe the sample and evaluate simple correlations. A path analysis was done using the AMOS 4.0 statistical program. Results: Of the 49 hypothesized paths, 13 were statistically significant, and the model accounted for 22% of the variance in fear of falling among the elderly. There was support for the fit of the model to the data with a nonsignificant chi square at 0.478 (df=2, p=0.79), and the ratio of chi-square to degrees of freedom was 0.24, a CFI of 0.99 and RMSEA of 0.00. In particular, gender, a history of falling, and exercise were significant predictors of fear of falling. Conclusions/Implications: As anticipated, exercise is an important factor to prevent fear of falling. As a modifiable variable, self-efficacy and outcome expectation indirectly influence fear of falling through exercise.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.6
• /
• pp.934-947
• /
• 2011

The purpose of this study is to analyze products for good taste and convenience, which become an engine to constantly create customers. In addition, this study is aimed at investigating the relationship between the selective attributes of Home Meal Replacement, the perceived utilitarian value, and the repurchase intention, and drawing new suggestions on the Home Meal Replacement market from a new marketing perspective. Based on a total of 215 samples, this study reviewed the reliability and fitness of the research model and verified a total of 5 hypothesized using the Amos program. The result of study modeling was GFI=0.905, AGFI=0.849, NFI=0.889, CFI=0.945, and RMR=0.0.092 at the level of $x^2$=230.22 (df=126, p<0.001). First, the food quality (${\beta}$=0.221), convenience (${\beta}$=0.334), packing (${\beta}$=0.278), and employee service (${\beta}$=0.204) of home meal replacement consideration attributes had a positive (+) influence on perceived utilitarian value. Second, perceived utilitarian value (${\beta}$=0.584) had a positive (+) influence on repurchase intention. The factors to differentiate one company from other competitors in terms of the utilitarian value are the quality of food, convenience, wrapping, and services by employees. This study has illustrated the need to focus on the development of a premium menu to compete with other companies and to continue to research and develop nutritious foods that are easy to cook. Moreover, the key factors to have a distinct and constant competitive edge over other companies are the alleviation of consumer anxiety over wrapping container materials, the development of more designs, and the accumulation of service know-how. Therefore, it is necessary for a company to strongly develop the key factors based on its resources as a core capability.

• Journal of Animal Science and Technology
• /
• v.54 no.2
• /
• pp.89-94
• /
• 2012

The objective of this study was to estimate the genetic parameters and breeding value of swine using their economic traits. The traits considered were age at 90 kilograms body weight (D90 kg), backfat thickness (BF) and eye muscle area (EMA). Estimation of genetic parameters and breeding value from 18,668 heads considering the economic traits were based on farm performance data from May 2007 to April 2011. Estimation of genetic parameters based on economic traits revealed that the single best model was fitted after finding source of variance on fixed and random effects and estimated by a multiple trait model using DF-REML (Derivative-FREE Restricted Maximum Likelihood). In this study, the estimated heritabilities of Duroc, Berkshire, Landrace and Yorkshire were about 0.22-0.59 for the D90 kg, 0.47-0.62 for the BF and 0.23-0.37 for the EMA. Genetic correlation of D90 kg with BF and EMA of the four breeds were -0.01-0.24 and -0.35--0.23, respectively. Moreover, the genetic correlation of BF with EMA was -0.68--0.17. On the other hand, the phenotypic correlation of D90 kg with BF and EMA of the four breeds were about 0.01-0.11 and -0.37--0.21, respectively, while the phenotypic correlation of BF with EMA was -0.68--0.17. Results showed that the genetic trends of breeding value every year were decreasing for D90 kg, increasing for BF while for EMA inconsistent values were obtained.

• Journal of Animal Science and Technology
• /
• v.54 no.2
• /
• pp.83-87
• /
• 2012

The purpose of this study was to estimate genetic parameters for productive traits in swine. Productive traits were considered on average daily gain (ADG), body height (BH) and body length (BL). Genetic analysis was consisted of 18,668 heads for productive traits which were based on on-farm performance tested from May, 2007 to Apr, 2011. For estimating genetic parameters on productive traits, single best model was fitted after finding source of variance on fixed and random effects and estimated with a multiple trait animal model by using DF-REML (Derivative-Free Restricted Maximum Likelihood). The estimated heritabilities of Duroc, Berkshire, Landrace and Yorkshire 0.22-0.58 for the average daily gain, 0.34-0.41 for the body height and 0.4-0.52 for the body length, respectively. Phenotypic correlations of average daily gain with body height and body length for the four breeds were 0.42-0.48, 0.53-0.58, 0.34-0.46 and 0.47-0.56, respectively. Phenotypic correlations of body height with body length were 0.41, 0.57, 0.52, 0.59, respectively. The estimated genetic correlation coefficients of average daily gain with body height and body length estimated for the four breeds were 0.34-0.47, 0.70-0.75, 0.17-0.38 and 0.50-0.53, respectively. The estimated genetic correlation coefficients of body height with body length were 0.57, 0.69, 0.61 and 0.71, respectively.

• Journal of dental hygiene science
• /
• v.9 no.3
• /
• pp.327-338
• /
• 2009

This study was to develop an instrument for multidimensional measurement of Korean scaling fear (KSF)-1.0 and analyze related factors. A sample of 720 subjects(scaling patients and community people) was studied in Daegu city from November in 2008 to March in 2009. Authors first conceptualized the KSF, item generation, item reduction, and questionnaire formatting were performed in the stage of the development. Item descriptive, missing%, item internal consistency, and item discriminant validity were analyzed in the item-level, also descriptive, floor and ceiling effect were analyzed in the scale-level. Cronbach's alpha, test-retest, inter-dimension correlations, and factor analysis were performed to evaluate the validity and reliability in the new instrument. Confirmative factor analysis was did to evaluate the fit of model. The results for item-level and scale-level were acceptable except item discriminant validity. The reliability for 0.92~0.96 of corelation coefficient range(Cronbach's alpha 0.96~0.98) was high in the test-retest, and there was no significant difference in paired t-test. Item internal consistency(range of pearson corelation coefficient 0.39~0.95) was also high. The result of explanatory factor analysis was the same as the intended dimension structure, also confirmatory factor analysis results revealed that the dimensional structure model were fined well in the evaluation of model fit($x^2$= 1245.66, df=146, p=0.0000; GFI=0.85; AGFI=0.80; RMSEA=0.10). Factors related to KSF by multiple regression were gender($\beta$=0.28, p=0.0004) and teeth brush method($\beta$=-0.15, p=0.0053) in scaling patients, also gender($\beta$=0.25, p=0.0002), educational level($\beta$=0.14, p=0.0155), teeth brush method($\beta$=-0.09, p=0.0229) and time of daily work out($\beta$=-0.10, p=0.0055) were significantly associated with KSF in no scaling group. In conclusion, The results of this study reveal that the new developed measurement scale was reliable and val id instrument for measuring the KSF in dental hygiene patients and community people. We recommend that further research should develop more the instrument for the Korean scaling fear.