• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.519-528
• /
• 2016

Frequently torrential rain is occurred by climate change and urbanization. Urban is formed with road, residential and underground area. Without detailed topographic flooded analysis consideration can take a result which are wrong flooded depth and flooded area. Especially, flood analysis error of population and assets in dense downtown is causing a big problem for establishments and disaster response of flood measures. It can lead to casualties and property damage. Urban flood analysis is divided into sewer flow analysis and surface inundation analysis. Accuracy is very important point of these analysis. In this study, to confirm the effects of the elevation data precision in the process of flooded analysis were studied using 10m DEM, LiDAR data and 1:1,000 digital map. Study area is Dorim-stream basin in the Darim drainage basin, Sinrim 3 drainage basin, Sinrim 4 drainage basin. Flooding simulation through 2010's heavy rain by using XP-SWMM. Result, from 10m DEM, shows wrong flood depth which is more than 1m. In particular, some of the overflow manhole is not seen occurrence. Accordingly, detailed surface data is very important factor and it should be very careful when using the 10m DEM.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.4
• /
• pp.145-154
• /
• 2024

This study used the discrete element method (DEM) to model the driving process of open-ended piles and investigate the behavior of soil plug during pile penetration. The developed DEM model was verified by comparing model pile test results and numerical analysis, particularly using a contact model considering rolling resistance between soil particles. The study successfully simulated soil compression inside the pile by adjusting the relative density and penetration velocity, and it was confirmed that the soil plug tended to be more compressed as the initial penetration velocity decreased. Soil plug length measurements, plug length ratio, and incremental filling ratio were analyzed and validated against experimental results. The developed DEM model aims to reduce trial and error in further studies by detailing the modeling and verification process.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.71-77
• /
• 2002

DEMs(digital elevation models) are generally used to automatically map the channel network and to delineate subbasins. At present, most DEM data are derived from three alternative sources which are ground survey, pphotogrammetric data capture and digitized cartographic data sources. The accuracy of a DEM is dependent on the spatial resolution, quality of the source data, collection and processing procedures, and digitizing systems. weather conditions and nature environment.etc provide us satellite image of the highest quality. However, Match in error of the auto generation DEM was severely affected by physical and environmental conditions at shooting time. This paper shows that real-time operation analysis of applied hydrology after extracting DEM Using a pair of Kompsat images.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.163-176
• /
• 2017

The Discrete Element Method (DEM) has been widely used in civil engineering as well as various industrial fields to simulate granular materials. In this study, DEM was adopted to predict the performance of the face plate-type earth pressure balance (EPB) shield TBM (Tunnel Boring Machine). An analysis of the TBM excavation performance was conducted according to two pre-defined excavation conditions with the different rotation speeds per minute (RPM) of the cutterhead. The TBM model which was used in this study has a 6.64 m of diameter and six spokes. Also, 37 precutters and 98 scrapers at an each spoke were modeled with a real-scale specification. From the analysis, compressive forces at the cutterhead face, shield and cutting tools, resistant torques at the cutterhead face, muck discharge rate and accumulated muck discharge by the screw auger were measured and compared.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.81-92
• /
• 2002

일반적으로 수치사진측량시스템을 통해 도심지역에서 자동으로 DEM을 추출하는 경우 해석도화원도에서 추출하는 DEM에 비하여 정확도가 크게 저하되어 도심지역에 대한 정사투영영상 생성이나 정사투영영상을 이용한 수치지도 제작시 품질저하의 요인이 되고 있다. 따라서 본 연구는 수치사진측량기법을 이용한 도심지역 지형공간정보 생성시 정확도에 영향을 크게 미치는 도심지역 DEM의 정확도를 향상시키는데 목적이 있다. 본 논문의 수행결과, 수치사진측량기법을 이용하여 도심지역에 대한 DEM 추출시 대상지역에 대한 지형분류를 통한 DEM추출방법을 적용하여 도심지역에 대한 DEM의 정확도를 향상시킬 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.494-494
• /
• 2023

수치모형을 활용하여 하천 흐름을 해석하기 위해서는 하도의 형태를 나타내는 지형자료가 요구되며, 주흐름 방향에 직각 방향으로의 횡단면도는 다량의 자료가 필요하다. 측량을 통한 횡단면도의 확보는 시간과 비용이 많이 소요될 뿐 아니라 날씨와 같은 외부적 요인에 따라 측량 결과물의 정확도가 달라질 수 있다. 또한 하천의 유속이 매우 빠를 때에는 정확도 높은 횡단 측량자료를 얻기는 불가능하며 접근이 어려운 지역이나 중소규모의 하천 측량자료는 구축되어 있지 않은 실정이다. 이에 따라 위성영상과 수치표고모델(Digital Elevation Model, DEM)에 기반하여 하천구역과 하도의 특성을 정의하는 방법이 대안으로 제시되고 있다. 본 연구에서는 하천지형 측량자료가 존재하는 섬진강댐부터 오수천 합류전까지를 대상으로 가상하도 생성기법을 적용하고, 1차원 하천흐름해석을 수행하여 가상하도 구축방안의 유효성을 검토하고자 하였다. 위성영상 자료를 활용하여 하천구역을 정의하였으며 DEM에서 추출된 표고에 기반하여 제방고와 횡단면도를 구축하였다. 구축된 횡단면도와 실단면 비교시, DEM 표고 및 하천구역 정의 지점의 정확도에 따라 제방고가 달라지는 것으로 나타났으며, 홍수터에 대한 고려가 포함되지 않아 실단면과 다소 차이가 있는 것으로 확인된다. 구축한 지형자료를 1차원 하천흐름해석 모형인 K-River에 적용하였으며, 상류단 경계조건으로는 섬진강댐 방류량을 하류단 경계조건으로는 등류조건을 적용하였다. 구축영역 내 존재하는 지류의 유입량은 측방유입으로 고려하였다. 수치모의 결과로부터 구축된 횡단면의 최심고와 실단면의 최심고가 유사한 지점에서는 수위재현성이 양호한 것으로 확인되었다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.115-126
• /
• 2006

The purpose of this study is to develop an urban inundation model using GIS(geographic information system). The model is combining a storm sewer system model and a overland-flow model for the estimation inundation depth in urban area caused by the surcharge of storm sewers. SWMM(storm water management model) was employed to resolve the storm sewer flow and to provide the overflow hydrographs caused by the failure of a drainage system due to the shortage of drainage capacity. The level-pool overland-flow model and DEM based overland-flow model were used to calculate the detail inundation zones and depths due to the surcharge on overland surface. The simulation results can help the decision preventing flood damages by redesigning and enlarging the capacities of storm sewer systems in the inundation-prone areas. The model can also be applied to make the potential inundation area map and establish flood-mitigation measures as a part of the decision support system for flood control authority.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.9
• /
• pp.21-28
• /
• 2016

The purpose of this study is to compare the three areas that each estimated by using three different river topographic maps. For construction of river topographic maps, the data used in this study are ASTER, SRTM and a 1:5,000 scale digital map data sets in 14 streams of the Cheongdo-gun and Uiseong-gun. HEC-GeoRAS, RAS Mapper, and RiverCAD model are applied for the flooding area analysis using observed data and design rainfalls. The result of analysis is to compare observed flooding area based on the flood plain maps with estimated inundation area by hydraulic models and constructed river topographic maps. The results of this study are as follows; Flooding area by HEC-GeoRAS model is similar to the inundation area of flood plain map and appears in order of RAS Mapper, and RiverCAD model in all watersheds. Flood inundation area by SRTM DEM is similar to the result of 1:5,000 scale digital map in all watersheds and all analysis models. The SRTM DEM shows the most similarity to the digital map than ASTER DEM in all of the watershed scale and analysis models. HEC-GeoRAS and RiverCAD model are efficient models for flood inundation analysis in small watershed and HEC-GeoRAS and Ras Mapper model are efficient in medium to large watershed.

• Journal of the Korean Society for Railway
• /
• v.8 no.4
• /
• pp.337-341
• /
• 2005

Algorithm for passenger flow analysis based on DEM(Discrete Element Method) is newly developed. In the new algorithm, there are many similarity between multi phase flow and passenger flow. The velocity component of 1st phase corresponds to the direction vector of cell, each particle to each passenger, volume fraction to population density and the momentum equation of particle to the walking velocity equation of passenger, etc. And, the walking velocity of passenger is also represented by the function of population density. Key algorithms are developed to determine the position of passenger, population density and numbering to each passenger, To verify the effectiveness of new algorithm, passenger flow analysis for simple railway station model is conducted. The results for passenger flow in the model station are satisfying qualitatively and quantitatively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.50-66
• /
• 2010

In this study, we performed a GIS-based debris flow simulation using the high-resolution airborne LiDAR DEM in order to establish the effective and resonable debris prevention plans in Korea. To do so, we set a study area to an specific region over Pyeochang-gun in Kangwon-do which showed the extreme rugged distribution of topography and simulated a possibility of debris flow occurrence in this area using a GIS-based numerical simulation program which was developed by applying the finite difference method. After that, we also performed the debris flow simulation by SINMAP and geomorphic analysis method in the same region and compared each result with that of GIS-based debris simulation for verifying the reliability.