• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.659-663
• /
• 2010

In recent, flood inundation damages by hydraulic structure failures have increased drastically and thus a variety of countermeasures were needed to minimize such damages. A real-time flood inundation prediction technique is essential to protect and mitigate flood inundation damages. In the context of real time flood inundation modeling, this study aims to develop a grid based two-dimensional numerical method for flood inundation modeling using globally-available DEM data: SRTM with $90m{\times}90m$ spatial resolution. The newly-developed model guarantees computational efficiency in terms of geometric data processing by direct application of DEM for flood inundation modeling and also have good compatibility with various types of raster data when compared to a commercial model such as FLUMEN. The model, which employed the leap-frog algorithm to solve shallow water and continuity equations, can simulate inundating flow from channel to lowland and also returning flow from lowland to channel by comparing water levels between channel and lowland in real time. We applied the model to simulate the BaekSan levee break in the Nam river during a flood period from August 10 to 13, 2002. The simulation results had good agreements with the field-surveyed data in terms of inundated area and also showed physically-acceptable velocity vector maps with respect to inundating and returning flows.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1201-1205
• /
• 2010

최근 몇 년간 기후변화에 의해 기상이변이 발생하고 있으며 이에 따른 집중호우로 인한 홍수피해가 심각한 수준으로 발생하고 있다. 이에 수문기상학적 요소와 특성인자들의 정확한 상호 연관성의 규명과 공간적 변동성 해석은 강우-유출 모형에서 발생하는 불확실성을 감소시키는데 중요한 요소라고 할 수 있다. 이에 본 연구에서는 레이더 강우 격자 해상도와 지형인자 격자 해상도에 따라 강우-유출모형이 어떻게 반응하는지 분석하였다. 본 연구에서는 가-분포 강우-유출 모형인 ModClark 모형을 이용하여 강원도 인제군의 내린천 유역을 대상으로 광덕산 레이더자료를 이용하였다. ModClak 모형 구성을 위한 GIS 지형공간 자료는 30m, 150m, 250m, 350m 격자크기의 DEM을 사용하였으며, 2006년 7월 14일부터 7월 17일까지의 관측레이더 강우자료를 500m, 1km, 2km, 5km, 10km 사용하여 유출모의를 실시하고, 각각의 격자해상도에 따른 모의 결과를 비교하기 위해 유출수문곡선을 작성하고 유출량 변화를 모의하였다. 분석 결과 첨두유량 및 유출체적에 대해서는 DEM 30m~150m, Grid 500m~2,000m 크기의 격자일 때 가장 최적의 유출 모의를 한 것으로 분석되었으며, 통계적 분석에 의한 분석결과에서는 모든 DEM 격자는 Grid 500m인 경우, 모든 Grid 격자는 DEM 30m인 경우에 모형의 적합성이 높은 것으로 나타났고, 민감도 산정 결과 지수 등급이 높은 DEM이 분포형 모형의 결과 값에 큰 영향을 주는 것으로 분석되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.261-264
• /
• 2011

유역의 유출현상은 유출에 직접적인 영향을 미치는 강수 등 수문학적 인자가 중요한 요인으로 작용하지만 유역의 지형학적 특성에 의해서도 유출에 미치는 영향은 매우 크다. 본 연구에서는 DEM의 해상도에 따라 유출, 유사, 증발에 어떠한 영향을 미치는지를 판단하는 것을 연구목적으로 하였다. 연구지역은 대전시를 관류하는 갑천유역(유역면적 약 $609km^2$)을 대상으로 하였으며, 사용한 DEM 자료는 30m 공간해상도는 갖는 WAMIS의 자료를 이용하였다. 이 30m의 공간해상도를 각각 60m, 90m, 120m, 150m로 각각 resampling, sink 제거 등의 과정을 거쳐 각 해상도별 DEM자료를 생성하였다. 유출 특성 분석을 위해 HyGIS-SWAT 모형을 이용하였다. 모형의 적용 결과 첨두유출은 30m해상도를 기준으로 150m해상도에서는 약 16%정도 감소하는 것으로 나타났으나, 총유출은 약 2%정도 감소하는 것으로 나타났고, 증발량의 경우에는 30m 해상도를 제외하고 대부분 비슷한 결과를 제시하고 있는 것으로 나타났다. 또한 그림 1에서 제시한 바와 같이 30m해 상도에서는 첨두유출은 크지만 저류부 유출은 오히려 150m해상도에서 더 많은 유출이 발생하는 것으로 분석되었다.

• Geomechanics and Engineering
• /
• v.16 no.5
• /
• pp.495-501
• /
• 2018

Geogrid application that has proved to be an effective and economic method of reinforcing particles, is widely used in geotechnical engineering. The discrete element method (DEM) has been used to investigate the micro mechanics of the geogrid deformation and also the interlocking mechanism that cannot be easily studies in laboratory tests. Two types of realistically shaped geogrid models with square and triangle apertures were developed using parallel bonds in PFC3D. The calibration test simulations have demonstrated that the precisely shaped triangular geogrid model is also able to reproduce the deformation and strength characteristics of geogrids. Moreover, the square and triangular geogrid models were also used in DEM pull-out test simulations with idealized shape particle models for validation. The simulation results have been shown to provide good predictions of pullout force as a function of displacement especially for the initial 30 mm displacement. For the granular material of size 40 mm, both the experimental and DEM results demonstrate that the triangular geogrid of size 75 mm outperforms the square geogrid of size 65 mm. Besides, the simulations have given valuable insight into the interaction between particle and geogrid and also revealed similar deformation behavior of geogrids during pullout. Therefore, the DEM provides a tool which enable to model other possible prototype geogrid and investigate their performance before manufacture.

• Geomechanics and Engineering
• /
• v.24 no.1
• /
• pp.57-65
• /
• 2021

The effects of initial soil fabric and aspect ratio (AR) on the small-strain stiffness (G0) of granular soils are studied by employing discrete element method (DEM) numerical analysis. Elongated clumps composed of subspheres were adopted, and the G0 values were obtained by DEM simulations of drained triaxial tests under different densities and initial confining pressure (p0). The DEM simulations indicate that the initial soil fabric has an insignificant effect on G0. The effect of the AR on G0 is related to the initial density. Namely, for dense specimens, G0 first increases with increasing AR, reaching a plateau value when the AR ≥ 1.5. However, for loose specimens, G0 gradually increases as the AR increases. Microscopic examination reveals that G0 uniquely depends on the coordination number of the particles (CN-particle) rather than the subspheres (CN-sphere) at the particulate level for the effects of initial soil fabric and AR. Finally, Poisson's ratio ν0 is also determined by CN-particle. In addition, based on data in literature and this study, ν0 can be fitted as ν0 = 5.920(G0/(p0)1/3)-0.99, which can be used to predict ν0 of granular soils based on the measured G0.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.301-308
• /
• 2003

As the results of this study, the proposed method of this study which is increased to accuracy of DEM by classification of terrain is better than accuracy of DEM which is automatically generated by digital photogrammetry workstation system(DPWS). And, the edge detection method which is proposed by this study is established to extraction of geo-spatial information in ortho image.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1219-1222
• /
• 2004

임의의 유역에서 유역을 관리할 목적으로 GIS DB를 구축할 경우 DEM을 이용하여 유역의 Framework 공간 DB를 구축하는 절차에 대해 고찰해 보고자 한다. 유역의 Framework 공간 DB를 DEM을 이용하여 구축할 경우는 DEM을 이용하여 유역의 수문지형학적 특성인자를 손쉽게 추출할 수 있으며 이들이 자동으로 공간 DB의 속성으로 입력되어 관리될 수 있다. 본 연구에서는 유역정보를 관리하기 위한 기반정보인 Framework 공간 DB의 형성 과정에 대해 정의하고 HyGIS를 개발하여 Network 기반의 수자원 통합 유역관리시스템의 개발 방향을 제시하고자 한다.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.216-218
• /
• 2003

QuickBird satellite is quickly becoming the best choice for high-resolution mapping using satellite images. In this paper, we will describe the followings: (1) how to correct QuickBird data using different geometric correction methods, (2) data fusion using QuickBird panchromatic and multispectral data, and (3) automatic DEM extraction using QuickBird stereo data.

• Korean Journal of Remote Sensing
• /
• v.6 no.1
• /
• pp.1-9
• /
• 1990

This paper presents a method of the constructing DEM(Digital Elevation Model) from the image data acquired from a commercial map using the scanner. Data acquistion, mark elimination, linking the broken line, elevation interpolation and 3D display processing are performed and the results are satisfatory.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.423-431
• /
• 2003

This study presents on generation coefficients of the RFM using GEO-level stereo images of the IKONOS satellite. 3-D positioning and DEM generation of this model on the test field. In result, the maximum error of image coordinates acquired by the upward transform of the RFM did nat exceed 8 pixels. DEM was generated with kriging interpolation extracted three dimensional ground coordinate to rational quadratic function form, me compared it to reference digital elevation model made from 1:5,000 digital map and 1:1,000 digital map, and so, could generate digital elevation model in the accuracy as average RMSE of elevation was ${\pm}$ 3∼5 m in RFM.